Operation & Maintenance Manual

Each Sieruta attachment includes a permanent identification plate with: Model number, Serial number, Manufacturing date, Maximum operating weight. Products that carry the CE mark show it on the plate.

Sieruta attachments are designed for use with excavators and wheel loaders within the stated weight classes. Use only for material handling, earthmoving, or demolition operations as specified per product category.

• Always verify attachment is compatible with carrier machine
• Inspect attachment before each use for wear, damage, or deformation
• Never exceed rated capacity or operating weight
• Ensure all personnel are clear of swing radius during operation
• Never use attachment for lifting persons
• Shut down machine before inspecting or servicing attachment

• Verify pin dimensions match carrier machine specifications
• Ensure quick coupler (if used) is rated for attachment weight
• Connect hydraulic lines if applicable (tilt, rotate, grapple)
• Verify all connections are secure before operation
• Perform function test at low speed before full operation

• Daily: Visual inspection, check for loose pins, hydraulic leaks
• Weekly: Check wear plate thickness. Grease the pivot points per the operation and maintenance manual supplied with the attachment
• Monthly: Inspect cutting edges, teeth, check bolt torque
• Annually: Full inspection by qualified personnel, NDT if required

Replace cutting edges when worn to 50% of original thickness. Replace teeth when point is worn to body width. Replace wear plates when thickness is reduced by 30%.