Buckets · Wheel loader
HTP - high-tip bucket for wheel loader
- We usually reply within 1 working day
- We check the fit before we send the quote
- 12 months warranty on manufacturing defects in the components Sieruta makes itself
- Every offer names the dispatch week
- If a bracket we made is wrong and does not fit your machine, we replace it.
Call +48 503 808 636 Message us on WhatsApp Photos and voice notes are welcome.

Features
- Own tipping frame and cylinders: the load leaves at the top of the arc, above what the loader arms reach on their own
- Body sized for light bulk material, capacities to 9 m³
- Cylinders at the sides or nearer the centre, chosen for the loader geometry and the material
- Reversible bolt-on cutting edge: turn it when one side wears, replace it without welding
- Coupler, width, capacity and wear parts fixed on the approval drawing for one machine; every bucket passes a factory acceptance test before dispatch
About this family
The extra height lets a loader fill high-sided tippers, silo hoppers and bunkers without a ramp. The bucket body is sized for light, bulky material: wood chips, bark, compost, grain, coal, glass, recycling fractions and waste. Capacities run to 9 m³; the heaviest bucket we build weighs 8 tonnes, the limit of the crane in our assembly hall. We choose the cylinder position for your loader and your material: cylinders at the sides keep the bucket floor clear for sticky loads; cylinders nearer the centre suit narrow frames and large widths. The tipping cylinders run from a third hydraulic function on the loader. The cutting edge is a reversible bolt-on plate, turned once it wears, replaced without welding. The example model HTP-190-3200-5m3 is 3200 mm wide, holds 5 m³ heaped and is sized for wheel loaders in the 18–19 t class. Coupler, width, capacity, spill guard and wear package are specified on the drawing you approve before cutting starts.
Dimensions
| Machine class [t] | Width [mm] | Heaped capacity ISO 7451 [dm³] |
|---|---|---|
| 18–19 | 3,200 | 5,000 |
Compliance, certification & documentation
- EN ISO 3834-2 Certified welding quality CSW/1293/2025
- EN 1090-1 EXC1 + EXC2 Factory production control 1433-CPR-0257
- EN ISO 9606-1 · WPQR EN ISO 15614 Qualified welders and procedures
- EN ISO 9712: VT + PT level 2 Non-destructive testing where the drawing or inspection plan requires it
- EN 10204 3.1 Material traceability
Warranty
12 months warranty on manufacturing defects in the components Sieruta makes itself.
Normal wear, misuse or overloading and unauthorised modifications are not covered. Warranty terms and claims
Why buy from the factory
- Cutting, machining, welding and painting on one site, our own factory in Poland, EU
- More than 50,000 attachments delivered since 2008
- A record for every serial number, so the spare parts match your attachment
Request a quote
Tell us your machine and the job. An engineer checks the fit, and we usually reply within 1 working day.
More from this family group
2–24 tons Standard
FGP General purpose loader bucket
General purpose bucket for a front loader, for loading, unloading and stockpiling loose material.
2–16 tons Standard
LSF Loader stone forks
Stone forks for a wheel loader, to pick up and carry rocks and other heavy material.
2–20 tons Standard
FLB Levelling bucket for front loader
Wide, low levelling bucket for a front loader, made for fine grading.


