Buckets · Wheel loader
FLB - levelling bucket for front loader
- For machines of 2–20 t
- Widths 1,800–3,000 mm
- We usually reply within 1 working day
- We check the fit before we send the quote
- 12 months warranty on manufacturing defects
- Every offer names the dispatch week
- If a bracket we made is wrong and does not fit your machine, we replace it.
Call +48 503 808 636Message us on WhatsAppPhotos and voice notes are welcome.
Standard
FLB Front levelling bucket for loaders
The whole range: Excavator buckets
Compatible interfaces: L20–L120
- 2–20 tons
The FLB levelling bucket is for fine grading and levelling with a loader or mini-loader. It works as a standard bucket and as a levelling bucket on construction and landscaping jobs.
About this family
FLB levelling bucket for front loaders, for fine grading, backfilling and levelling.
The Front Leveling Bucket is for fine grading, backfilling and levelling material with a loader, where the job needs a smooth, even finish.
The bucket is wide and low, so it spreads material in an even layer. The cutting edge is reinforced.
The weight is balanced for full-size loaders and mini-loaders.
Side plates keep the material in the bucket while you carry it. The curved back lets the material run out when you dump.
The FLB is built to the quick-attach plate your loader carries.
It comes for loaders from 2 to 20 t, in widths from 1800 to 3000 mm.
Typical jobs are final grade preparation for driveways and building pads, landscape contouring and sports field maintenance.
Features
- Wide, low-profile design for spreading and levelling material
- Clear View of the Edge: The shape of the bucket lets the operator see its edge, which helps accurate levelling.
- Levelling in Reverse: The sharp back edge of the bucket levels the material exactly when the loader drives backward.
- Steel build
- Smooth interior: The bucket is plain inside, with nothing for material to catch on as it fills and empties.
- Wear Steel Cutting Edge: The cutting edge is high-tensile, abrasion-resistant wear steel and stays sharp after long use.
- Made for fine grading
- Built to your loader’s quick-attach plate
Dimensions
The letters on the drawing match the columns in the table below.
Dimensions in mm
Typical jobs
The Front Leveling Bucket is used for:
- Fine grading and leveling applications
- Backfilling trenches and foundations
- Landscaping work: placing, contouring and levelling material
- Finishing touches on construction sites
- Any work where the surface must end up smooth and level
- General earthmoving and material spreading
The Front Leveling Bucket is made for grading work with a loader. Contact us and we will help you find the right bucket for your loader model.
- Loading machines…
Models and specifications
Figures as printed on this family’s datasheet. A dash means the datasheet does not state that figure.
Datasheet (PDF)- Which bracket does your machine take? See the coupler fit reference
- Looking for your machine by make and model? See the machine fit tables
| Model | Machine class [t] | Width [mm] | Height [mm] | Length [mm] | Capacity [dm³] | Adapter | Weight [kg] | Get a price |
|---|---|---|---|---|---|---|---|---|
| FLB-180 | 2–4 | 1800 | 500 | 1000 | 540 | L20 | 180 | Get a price |
| FLB-200 | 4–6 | 2000 | 550 | 1160 | 850 | L30 | 330 | Get a price |
| FLB-220 | 6–9 | 2200 | 650 | 1260 | 960 | L40 | 370 | Get a price |
| FLB-240 | 9–12 | 2400 | 650 | 1260 | 1150 | L60 | 420 | Get a price |
| FLB-260 | 12–14 | 2600 | 750 | 1460 | 1800 | L60 | 760 | Get a price |
| FLB-280 | 14–17 | 2800 | 800 | 1560 | 1950 | L90 | 820 | Get a price |
| FLB-300 | 17–20 | 3000 | 850 | 1750 | 2200 | L120 | 1120 | Get a price |
→ Scroll the table sideways to see every model.
Compliance, certification & documentation
- EN ISO 3834-2Certified welding qualityCSW/1293/2025
- EN 1090-1 EXC1 + EXC2Factory production control1433-CPR-0257
- EN ISO 9606-1 · WPQR EN ISO 15614Qualified welders and procedures
- EN ISO 9712: VT + PT level 2Non-destructive testingwhere the drawing or inspection plan requires it
- EN 10204 3.1Material traceability
- CE: 2006/42/ECCE markingTransition to Regulation (EU) 2023/1230 underway. Applicable from 20 January 2027.
- Materials
- Standard: Blade: high-strength, wear-resistant steel
Warranty
12 months warranty on manufacturing defects in the components Sieruta makes itself.
Normal wear, misuse or overloading and unauthorised modifications are not covered. Warranty terms and claims
Why buy from the factory
- Cutting, machining, welding and painting on one site, our own factory in Poland, EU
- More than 50,000 attachments delivered since 2008
- A record for every serial number, so the spare parts match your attachment
Request a quote
Tell us your machine and the job. An engineer checks the fit, and we usually reply within 1 working day.
More from this family group
Standard
FGP - General purpose loader bucket
General purpose bucket for a front loader, for loading, unloading and stockpiling loose material.
Fits your machine
Standard
LSF - Loader stone forks
Stone forks for a wheel loader, to pick up and carry rocks and other heavy material.
Fits your machine
HTP - High-tip bucket for wheel loader
A loader bucket, built to order up to 9 m³, that tips its load a second time on its own frame and cylinders. Light bulk material clears the side of a high truck or hopper the loader cannot reach on its own.
Fits your machine
