Buckets · Mini excavator - digging
KS mini - cable bucket for mini-excavator
- For machines of 0.6–10 t
- Widths 200–500 mm
- Couplers: S · MS · M · HS · OQ
- We usually reply within 1 working day
- We check the fit before we send the quote
- 12 months warranty on manufacturing defects
- Every offer names the dispatch week
- If a bracket we made is wrong and does not fit your machine, we replace it.
We quote ex works Ostrołęka, or delivered to your site on request. Every offer names the dispatch week.
Call +48 503 808 636Message us on WhatsAppPhotos and voice notes are welcome.
Standard
KS Nordic cable bucket straight profile
Known in Sweden as Kabelskopa (smalskopa) · in Denmark as Kabelskovl · in Finland as Kaapelikauha
The whole range: Excavator buckets
Compatible interfaces: S · MS · OQ · HS · M
- 0.6–10 tons
- Carriers: Mini, Midi
Part of the Nordic-profile set with DS mini - Scandinavian deep digging bucket for mini-excavator, PS mini - Scandinavian universal grading bucket for mini-excavator, PSH mini - hydraulic swivelling grading bucket for mini-excavators, KSV mini - Scandinavian profile cable V bucket for mini-excavator. Enquire about this set
A cable bucket in the Scandinavian profile, built for narrow trenches around cable, conduit and pipe bedding. The Hardox® shell and cutting edge hold their shape in abrasive ground, and the rounded profile releases sand and bedding material.
About this family
KS and KSV cable buckets for mini-excavators: two trench buckets for cable and pipe trenches, each with its own profile.
Dimensions
Dimensions in mm
Typical jobs
KS and KSV buckets are used for:
- Utility installations (cables, pipes, conduits)
- Drainage and irrigation systems
- Footing and foundation preparation
- Landscape edging and borders
- Any trenching project requiring precise depth and clean cuts
Which coupler is on your machine?
Pick the system on your machine and we put it in your enquiry. We check the bracket before we send the quote.
How to measure your coupler
Not sure which system it is? Three measurements tell us which bracket you need.
- Measure the diameter of both pins.
- Measure the distance between the pin centres.
- Measure the width between the inside faces of the ears.
If the coupler has a make or type printed on it, send that too.
- Loading machines…
Models and specifications
Figures as printed on this family’s datasheet. A dash means the datasheet does not state that figure.
Datasheet (PDF)- Which bracket does your machine take? See the coupler fit reference
- Looking for your machine by make and model? See the machine fit tables
Column heads: model and Machine class [t] · each cell: Capacity SAE [dm³] / Weight [kg]
| Width [mm] | KS-200.6–3.0 | KS-503.0–5.0 | KS-1005.0–10 |
|---|---|---|---|
| 200 | 19 / 20 | – | – |
| 300 | 33 / 27 | 53 / 48 | 101 / 90 |
| 400 | 50 / 34 | 79 / 57 | 147 / 105 |
| 500 | – | 107 / 65 | 196 / 120 |
| Get a price | Get a price | Get a price | |
| Height [mm] | 491 | 635 | 857 |
| Length [mm] | 615 | 790 | 1075 |
| Tip radius [mm] | 418 | 533 | 717 |
| Quick coupler brackets | S30 · S40 · MS01 · MS03 · M02 · M03 · HS02 · HS03 · OQ40 | S40 · MS03 · M10 · HS03 · OQ40 | S40/240 · S45 · MS08 · M10 · HS06 · HS08 · OQ45 |
→ Scroll the table sideways to see every model.
Compliance, certification & documentation
- EN ISO 3834-2Certified welding qualityCSW/1293/2025
- EN 1090-1 EXC1 + EXC2Factory production control1433-CPR-0257
- EN ISO 9606-1 · WPQR EN ISO 15614Qualified welders and procedures
- EN ISO 9712: VT + PT level 2Non-destructive testingwhere the drawing or inspection plan requires it
- EN 10204 3.1Material traceability
- CE: 2006/42/ECCE markingTransition to Regulation (EU) 2023/1230 underway. Applicable from 20 January 2027.
- Materials
- Standard: Body: Hardox®; Cutting edge: Hardox®
Warranty
12 months warranty on manufacturing defects in the components Sieruta makes itself.
Normal wear, misuse or overloading and unauthorised modifications are not covered. Warranty terms and claims
Why buy from the factory
- Cutting, machining, welding and painting on one site, our own factory in Poland, EU
- More than 50,000 attachments delivered since 2008
- A record for every serial number, so the spare parts match your attachment
Request a quote
Tell us your machine and the job. An engineer checks the fit, and we usually reply within 1 working day.
More from this family group
Standard
GP - General purpose digging bucket
A digging bucket for everyday excavation in earth, gravel, and loose materials. It is used for trenching, foundation work, and landscaping.
Fits your machine
Standard
GPL - General purpose digging bucket
A bucket for digging common materials like earth, gravel, and loose soil. It is used for trenching, foundation work, and landscaping.
Fits your machine
Standard
BDP mini - clay digging bucket for mini-excavator
The BDP bucket has the narrow Dutch profile for sticky clay and rocky ground on mini and midi-excavators. Anti-suction holes are an option, so sticky clay does not hold to the bucket floor.
Fits your machine
Standard
DS mini - Scandinavian deep digging bucket for mini-excavator
Deep digging bucket in the Nordic profile for mini-excavators, for rocky ground and abrasive material.
Fits your machine
Standard
KSV mini - Scandinavian profile cable V bucket for mini-excavator
The tapered V walls cut a self-supporting trench. A V-trench for cable and conduit runs takes less digging and backfill, and the body is Hardox® for stony subsoil.
Fits your machine
Standard
CB mini - hydraulic clamp bucket for mini-excavator
The hydraulic clamp bucket lets an excavator dig, then its clamp grips material for handling and sorting.
Fits your machine
