Buckets · Mini excavator - grading
PSH mini - hydraulic swivelling grading bucket for mini-excavators
- For machines of 1.2–12 t
- Widths 1,000–2,000 mm
- We usually reply within 1 working day
- We check the fit before we send the quote
- 12 months warranty on manufacturing defects
- Every offer names the dispatch week
- If a bracket we made is wrong and does not fit your machine, we replace it.
Call +48 503 808 636Message us on WhatsAppPhotos and voice notes are welcome.
Standard
Known in Sweden as Planeringsskopa, hydraulisk tilt · in Denmark as Planerskovl, hydraulisk tilt · in Finland as Luiskakauha, hydraulinen kallistus
The whole range: Excavator buckets
- 1.2–12 tons
- Carriers: Mini, Midi
Part of the Nordic-profile set with DS mini - Scandinavian deep digging bucket for mini-excavator, PS mini - Scandinavian universal grading bucket for mini-excavator, KS mini - cable bucket for mini-excavator, KSV mini - Scandinavian profile cable V bucket for mini-excavator. Enquire about this set
The PSH mini is the hydraulic version of the PS mini grading bucket. A cylinder swivels the bucket to the side, so the operator sets the angle of the cutting edge from the cab and finishes a slope without moving the machine.
About this family
The hydraulic version of the PS mini. A cylinder swivels the bucket, so the cutting edge meets the slope at the angle you set and the machine stays where it is.
The bucket body, the Scandinavian profile and the wear parts are the ones the PS mini uses. It is built for mini-excavators, where there is rarely room to reposition the machine. Tell us the machine and the working width and we will quote the right size.
Features
Hydraulic swivel:
- Hydraulic swivel, the cylinder angles the bucket to either side while the machine stays where it is
- Double pilot operated check valve, standard, so the set angle holds under load
- Hydraulic connection on the back of the bucket
Bucket, as on the PS mini:
- Scandinavian grading profile, low, wide and long, the same body the PS mini is built on
- Angled sides for visibility and for turning inside a trench
- Double bent section, front and back, stiffens the bucket body
Optional features:
- Horizontal wear bars, optional
- Reversible cutting edge, optional
Typical jobs
The PSH mini is made for:
- Grading slopes and verges at a set angle with a mini-excavator
- Cleaning and shaping small ditches from one position on the bank
- Levelling along a wall, a kerb or a pipe run in a garden or a yard
- Backfilling and finishing after pipe and cable work
- Landscaping work that has to leave a clean, even surface
Which coupler is on your machine?
Pick the system on your machine and we put it in your enquiry. We check the bracket before we send the quote.
How to measure your coupler
Not sure which system it is? Three measurements tell us which bracket you need.
- Measure the diameter of both pins.
- Measure the distance between the pin centres.
- Measure the width between the inside faces of the ears.
If the coupler has a make or type printed on it, send that too.
- Loading machines…
Models and specifications
The PSH mini is built on the PS mini bucket sizes listed here. Weights and capacities for the hydraulic version are to be confirmed.
Datasheet (PDF)- Which bracket does your machine take? See the coupler fit reference
- Looking for your machine by make and model? See the machine fit tables
Column heads: model and Machine class [t] · ✓ marks a width offered for that model
| Width [mm] | PS-251.2–2.5 | PS-602.5–6.0 | PS-806.0–8.0 | PS-1208.0–12 |
|---|---|---|---|---|
| 1000 | Offered | – | – | – |
| 1100 | Offered | – | – | – |
| 1200 | Offered | Offered | – | – |
| 1300 | – | Offered | Offered | – |
| 1400 | – | Offered | Offered | Offered |
| 1500 | – | – | Offered | Offered |
| 1600 | – | – | Offered | Offered |
| 1800 | – | – | Offered | Offered |
| 2000 | – | – | – | Offered |
| Get a price | Get a price | Get a price | Get a price |
→ Scroll the table sideways to see every model.
Compliance, certification & documentation
- EN ISO 3834-2Certified welding qualityCSW/1293/2025
- EN 1090-1 EXC1 + EXC2Factory production control1433-CPR-0257
- EN ISO 9606-1 · WPQR EN ISO 15614Qualified welders and procedures
- EN ISO 9712: VT + PT level 2Non-destructive testingwhere the drawing or inspection plan requires it
- EN 10204 3.1Material traceability
- CE: 2006/42/ECCE markingTransition to Regulation (EU) 2023/1230 underway. Applicable from 20 January 2027.
Warranty
12 months warranty on manufacturing defects in the components Sieruta makes itself.
Normal wear, misuse or overloading and unauthorised modifications are not covered. Warranty terms and claims
Why buy from the factory
- Cutting, machining, welding and painting on one site, our own factory in Poland, EU
- More than 50,000 attachments delivered since 2008
- A record for every serial number, so the spare parts match your attachment
Request a quote
Tell us your machine and the job. An engineer checks the fit, and we usually reply within 1 working day.
More from this family group
Standard
PS mini - Scandinavian universal grading bucket for mini-excavator
The PS mini grading bucket has the Scandinavian profile. It is made for mini-excavators, for fine grading and finishing work.
Fits your machine
Standard
GB - Rigid grading & ditching bucket, German profile
Rigid grading & ditching bucket with a flat top. It is used for ditch cleaning, grading and slope work.
Fits your machine
Standard
GBH - Hydraulic tilt ditching bucket for mini-excavator
Tilts up to 45 degrees to each side, and double pilot check valves hold the angle. Slopes, ditches and banks are shaped without moving the machine.
Fits your machine
Standard
GBP - Rigid grading & ditching bucket, Italian profile
A rigid grading and ditching bucket with a round inner profile and an HB500 cutting edge. It cleans ditches, grades and cuts slopes on mini and midi excavators.
Fits your machine
Standard
GBPH - Hydraulic tilting grading & ditching bucket
Tilts 45 degrees to each side, and a double pilot check valve holds the angle. Ditches, slopes and banks are cleaned and shaped without moving the mini-excavator.
Fits your machine
Standard
SB mini - Dutch profile grading & ditching bucket for mini-excavator
Dutch profile grading and ditching bucket for mini-excavators. It is used for grading, cleaning ditches and cutting slopes.
Fits your machine
