The whole range: Excavator buckets
Grading and ditching buckets for mini excavators, rigid or hydraulic, in four national profiles.
Grading and ditching buckets have a wide, shallow body and a straight edge for cleaning ditches, grading and cutting slopes. The rigid ones have nothing to connect: GB in the German profile, GBP in the Italian profile with a round inner profile and an HB500 cutting edge, SB mini in the Dutch profile, and PS mini in the Scandinavian profile for fine grading and finishing. GBH and GBPH tilt 45 degrees to each side, and pilot check valves hold the angle. PSH mini swivels the PS mini body, so the edge angle is set from the cab. Choose a rigid bucket by the profile your region works with, and a tilting or swivelling one when the slope has to be shaped while the machine stays put.
Families
GB Rigid grading & ditching bucket, German profile
Rigid grading & ditching bucket with a flat top. It is used for ditch cleaning, grading and slope work.
- We usually reply within 1 working day
- We check the fit before we send the quote
- Every offer names the dispatch week
GBH Hydraulic tilt ditching bucket for mini-excavator
Tilts up to 45 degrees to each side, and double pilot check valves hold the angle. Slopes, ditches and banks are shaped without moving the machine.
GBP Rigid grading & ditching bucket, Italian profile
A rigid grading and ditching bucket with a round inner profile and an HB500 cutting edge. It cleans ditches, grades and cuts slopes on mini and midi excavators.
GBPH Hydraulic tilting grading & ditching bucket
Tilts 45 degrees to each side, and a double pilot check valve holds the angle. Ditches, slopes and banks are cleaned and shaped without moving the mini-excavator.
PS mini - Scandinavian universal grading bucket for mini-excavator
The PS mini grading bucket has the Scandinavian profile. It is made for mini-excavators, for fine grading and finishing work.
SB mini - Dutch profile grading & ditching bucket for mini-excavator
Dutch profile grading and ditching bucket for mini-excavators. It is used for grading, cleaning ditches and cutting slopes.
PSH mini - hydraulic swivelling grading bucket for mini-excavators
A cylinder swivels the PS mini bucket, so you set the angle of the cutting edge from the cab. It finishes slopes and verges in tight places while the machine stays where it is.
Which one should I choose?
→ Scroll the table sideways to see every column.
How to choose (21)
- Choose GB when one angle is enough: it is rigid, with a flat top and nothing to connect. Choose GBH, also flat-topped, to shape slopes and banks without moving the machine: it tilts up to 45° to each side and double pilot check valves hold the angle.
- Both are rigid, for machines from 0.6 to 10 t, 600 to 1800 mm wide. Choose GB for the German profile with a flat top. Choose GBP for the Italian profile: its round inner profile gives an even flow of material, and drainage holes come as standard.
- Choose GB for a rigid bucket with a flat top and nothing to connect, on machines from 0.6 t. Choose GBPH to clean and shape ditches, slopes and banks without moving the machine: it tilts up to 45° to each side, on machines from 1.2 to 10 t.
- Choose GB for ditch cleaning, grading and cutting slopes in the German profile. Choose PS mini for levelling, backfilling and finishing: the low, wide and long Scandinavian bottom lets you see the surface you level.
- Both are rigid, for machines from 0.6 to 10 t, 600 to 1800 mm wide. Choose GB for the German profile with a flat top. Choose SB mini for the open Dutch profile, with drainage holes as standard so water runs out of the load.
- Choose GB for a rigid bucket with nothing to connect. Choose PSH mini to finish slopes and verges in tight places: a cylinder swivels the bucket, so you set the edge angle from the cab while the machine stays where it is.
- Choose GBP for a rigid bucket in the Italian profile, with a round inner profile and nothing to connect. Choose GBH when the bucket should tilt: up to 45° to each side, held by double pilot check valves.
- Both tilt up to 45° to each side. Choose GBH for the flat-top body and for the smallest machines, from 0.6 t, 800 to 1800 mm wide. Choose GBPH for machines from 1.2 to 10 t, 900 to 1800 mm wide, with drainage holes as standard and a recessed bracket for higher breakout force as an option.
- Choose PS mini, rigid, for levelling, backfilling and finishing, where the low, wide and long bottom lets you see the surface. Choose GBH for ditches, slopes and banks: it tilts up to 45° to each side, so the machine stays where it is.
- Choose SB mini for a rigid bucket in the open Dutch profile, with drainage holes as standard. Choose GBH to grade slopes and shape banks without moving the machine: it tilts up to 45° to each side.
- Both set the bucket angle hydraulically and hold it with pilot check valves. Choose GBH, a flat-top ditching bucket that tilts up to 45° to each side, for ditches, slopes and banks. Choose PSH mini for the Scandinavian grading profile of the PS mini, to finish slopes and verges in tight places.
- Choose GBP for a rigid bucket with a round inner profile, on machines from 0.6 t. Choose GBPH when the bucket should tilt up to 45° to each side, held by a double pilot check valve, on machines from 1.2 to 10 t.
- Choose GBP for ditch maintenance, grading and cutting slopes, with the round inner profile of the Italian style. Choose PS mini for levelling, backfilling and finishing: its low, wide and long Scandinavian bottom lets you see the surface you level.
- Both are rigid, for machines from 0.6 to 10 t, 600 to 1800 mm wide, with drainage holes as standard. Choose GBP for the Italian profile with a round inner profile. Choose SB mini for the open Dutch profile.
- Choose GBP for a rigid bucket with nothing to connect, for ditches, grading and slopes. Choose PSH mini to finish slopes and verges in tight places: a cylinder swivels the bucket and you set the edge angle from the cab.
- Choose PS mini, rigid, for levelling, backfilling and finishing with a clear view of the surface. Choose GBPH to clean and shape ditches, slopes and banks without moving the machine: it tilts up to 45° to each side.
- Choose SB mini for a rigid bucket in the open Dutch profile, from 0.6 t. Choose GBPH when the bucket should tilt up to 45° to each side to shape ditches, slopes and banks, on machines from 1.2 to 10 t.
- Both change the bucket angle hydraulically, and a double pilot check valve holds it. Choose GBPH, which tilts up to 45° to each side, for ditches, slopes and banks. Choose PSH mini for the Scandinavian profile of the PS mini, swivelled from the cab, to finish slopes and verges in tight places.
- Choose SB mini for grading, cleaning ditches and cutting slopes in the open Dutch profile. Choose PS mini for levelling, backfilling and finishing: the low, wide and long Scandinavian bottom lets you see the surface, and the same bucket loads and cleans up.
- Both have the same body, Scandinavian profile and wear parts. Choose PS mini for a bucket with nothing to connect, which also loads and cleans up. Choose PSH mini, the hydraulic version, when a cylinder should swivel the bucket so you set the edge angle from the cab without moving the machine.
- Choose SB mini for a rigid bucket in the open Dutch profile, with drainage holes as standard. Choose PSH mini to finish slopes and verges in tight places: it swivels, so you set the edge angle from the cab.
Mini excavator - grading: facts from the catalogue
Mini excavator - grading: 7 families on this page, 137 sizes in all, for machines from 0.6 to 12 t.
- GB - rigid grading & ditching bucket, German profile: 18 sizes, for machines from 0.6 to 10 t, 600–1,800 mm wide, 28–334 l capacity, 22–200 kg.
- GBH - hydraulic tilt ditching bucket for mini-excavator: 18 sizes, for machines from 0.6 to 10 t, 800–1,800 mm wide, 39–334 l capacity, 57–297 kg.
- GBP - rigid grading & ditching bucket, Italian profile: 22 sizes, for machines from 0.6 to 10 t, 600–1,800 mm wide, 43–511 l capacity, 29–260 kg.
- GBPH - hydraulic tilting grading & ditching bucket: 19 sizes, for machines from 1.2 to 10 t, 900–1,800 mm wide, 68–511 l capacity, 76–370 kg.
- PS mini - Scandinavian universal grading bucket for mini-excavator: 16 sizes, for machines from 1.2 to 12 t, 1,000–2,000 mm wide, 112–556 l capacity, 64–282 kg.
- SB mini - Dutch profile grading & ditching bucket for mini-excavator: 28 sizes, for machines from 0.6 to 10 t, 600–1,800 mm wide, 35–614 l capacity, 27–291 kg.
- PSH mini - hydraulic swivelling grading bucket for mini-excavators: 16 sizes, for machines from 1.2 to 12 t, 1,000–2,000 mm wide.
- Mini excavator - grading: GB - rigid grading & ditching bucket, German profile starts at the lightest machines, from 0.6 t, and PS mini - Scandinavian universal grading bucket for mini-excavator goes up to 12 t.
- Mini excavator - grading: widths from 600 mm (GB - rigid grading & ditching bucket, German profile) to 2,000 mm (PS mini - Scandinavian universal grading bucket for mini-excavator).