Buckets · Mini excavator - grading
GBP - rigid grading & ditching bucket, Italian profile
- For machines of 0.6–10 t
- Widths 600–1,800 mm
- Couplers: S · MS · M · HS · CW · OQ
- We usually reply within 1 working day
- We check the fit before we send the quote
- 12 months warranty on manufacturing defects in the components Sieruta makes itself
- Every offer names the dispatch week
- If a bracket we made is wrong and does not fit your machine, we replace it.
Call +48 503 808 636Message us on WhatsAppPhotos and voice notes are welcome.
Models and specifications
Figures as printed on this family’s datasheet. A dash means the datasheet does not state that figure.
Datasheet (PDF)- Which bracket does your machine take? See the coupler fit reference
- Looking for your machine by make and model? See the machine fit tables
Column heads: model and Machine class [t] · each cell: Capacity SAE [dm³] / Weight [kg]
| Width [mm] | GBP-100.6–1.2 | GBP-201.2–1.8 | GBP-301.8–2.5 | GBP-402.5–4.0 | GBP-604.0–6.0 | GBP-756.0–7.5 | GBP-957.5–10 | |
|---|---|---|---|---|---|---|---|---|
| 600 | 43 / 29 | Price & lead time | ||||||
| 800 | 60 / 37 | 77 / 44 | Price & lead time | |||||
| 1000 | 77 / 45 | 99 / 54 | 129 / 72 | 129 / 72 | Price & lead time | |||
| 1200 | 121 / 64 | 158 / 85 | 158 / 85 | 214 / 116 | Price & lead time | |||
| 1400 | 187 / 98 | 256 / 132 | 297 / 160 | Price & lead time | ||||
| 1500 | 274 / 140 | 321 / 170 | 417 / 222 | Price & lead time | ||||
| 1600 | 294 / 149 | 345 / 180 | 448 / 235 | Price & lead time | ||||
| 1800 | 392 / 200 | 511 / 260 | Price & lead time | |||||
| Price & lead time | Price & lead time | Price & lead time | Price & lead time | Price & lead time | Price & lead time | Price & lead time | ||
| Height [mm] | 333 | 376 | 427 | 427 | 499 | 559 | 637 | |
| Length [mm] | 344 | 387 | 462 | 462 | 546 | 591 | 673 | |
| Tip radius [mm] | 307 | 363 | 400 | 400 | 468 | 522 | 574 | |
| Quick coupler brackets | S30 · MS01 · M02 | S30 · MS01 · M02 · HS02 | S40 · MS03 · M03 · HS02 CW05 · OQ40 | S40 · MS03 · M03 · HS03 · CW05 · OQ40 | S40 · MS03 · M03 · HS06 · CW10 · OQ40 | S40/240 · MS08 · M10 · HS06 · CW10 · OQ45 | S45 · S50 · MS08 · M10 · HS08 · CW10 · OQ45 |
Standard
The whole range: Excavator buckets
Compatible interfaces: S · MS · CW · OQ · HS · M
- 0.6–10 tons
- Carriers: Mini, Midi
Part of the Italian-profile set with GPL - general purpose digging bucket, GBPH - hydraulic tilting grading & ditching bucket. Enquire about this set
The GBP rigid grading & ditching bucket is made for mini and midi excavators. It is used for ditch maintenance, grading and cutting slopes.
Features
- Seven sizes: GBP-10 to GBP-95 for machines from 0.6 to 10 t
- Widths: 600 to 1800 mm
- Capacity and weight: 43 to 511 l (SAE), 29 to 260 kg
- Steel: S355JR2 and Hardox® body, HB500 cutting edge
Base features:
- HB500 cutting edge
- Reinforcement bevel
- Round inner profile for an even flow of material
- Top bent section
- Drainage holes
- Protected weld seams at bottom
Optional features:
- Recessed adapter bracket
- HB400 reversible cutting edge RCE
- HB500 rear cutting edge
- Frontside cutting edges HB500
- Wear bars
From the catalogue
About this family
The Rigid Grading and Ditching Bucket is made for mini-excavators. It is used for ditch maintenance, grading and slope work. It’s available in sizes from 600 mm to 1800 mm, with capacities from 43 dm3 to 511 dm3. It is built from S355JR2 and Hardox® steel, with an HB500 cutting edge. The top section is rigid, and wear bars reduce wear on the bucket bottom. A bolt-on cutting edge is available, and the options include suction relief holes for sticky soil and drainage holes.
Seven sizes cover machines from 0.6 to 10 t, GBP-10 through GBP-95, in widths from 600 to 1800 mm. Capacity runs from 43 to 511 litres (SAE) and weight from 29 to 260 kg.
The body is S355JR2 and Hardox® steel with an HB500 cutting edge, a reinforcement bevel, a round inner profile, a top bent section, drainage holes and protected weld seams at the bottom. Options are a recessed adapter bracket, a reversible HB400 cutting edge, a rear HB500 cutting edge, HB500 cutting edges on the front sides and wear bars. On request it gets suction relief holes, so sticky soil drops out instead of holding to the bottom.
The quick coupler bracket follows the size, from S30, MS01 and M02 on GBP-10 up to S45, S50, MS08, M10, HS08, CW10 and OQ45 on GBP-95.
Dimensions
Dimensions in mm
Typical jobs
- Cleaning out and maintaining ditches
- Grading and levelling
- Cutting and trimming slopes
- Final grading for paths and driveways
- Backfilling trenches and spreading material
Compliance, certification & documentation
- EN ISO 3834-2Certified welding qualityCSW/1293/2025
- EN 1090-1 EXC1 + EXC2Factory production control1433-CPR-0257
- EN ISO 9606-1 · WPQR EN ISO 15614Qualified welders and procedures
- EN ISO 9712: VT + PT level 2Non-destructive testingwhere the drawing or inspection plan requires it
- EN 10204 3.1Material traceability
- CE: 2006/42/ECCE markingTransition to Regulation (EU) 2023/1230 underway. Applicable from 20 January 2027.
- Materials
- Standard: Body: S355JR2 and Hardox®; Cutting edge: HB500
- Options: Reversible cutting edge: HB400; Rear cutting edge: HB500; Cutting edges on the front sides: HB500
Warranty
12 months warranty on manufacturing defects in the components Sieruta makes itself.
Normal wear, misuse or overloading and unauthorised modifications are not covered. Warranty terms and claims
Why buy from the factory
- Cutting, machining, welding and painting on one site, our own factory in Poland, EU
- More than 50,000 attachments delivered since 2008
- A record for every serial number, so the spare parts match your attachment
Request a quote
Tell us your machine and the job. An engineer checks the fit, and we usually reply within 1 working day.
More from this family group
Standard
GB - Rigid grading & ditching bucket, German profile
Rigid grading & ditching bucket with a flat top. It is used for ditch cleaning, grading and slope work.
Weight class covers your machine
Standard
GBH - Hydraulic tilt ditching bucket for mini-excavator
Tilts up to 45 degrees to each side, and double pilot check valves hold the angle. Slopes, ditches and banks are shaped without moving the machine.
Weight class covers your machine
Standard
GBPH - Hydraulic tilting grading & ditching bucket
Tilts 45 degrees to each side, and a double pilot check valve holds the angle. Ditches, slopes and banks are cleaned and shaped without moving the mini-excavator.
Weight class covers your machine
Standard
SB mini - Dutch profile grading & ditching bucket for mini-excavator
Dutch profile grading and ditching bucket for mini-excavators. It is used for grading, cleaning ditches and cutting slopes.
Weight class covers your machine
Standard
PS mini - Scandinavian universal grading bucket for mini-excavator
The PS mini grading bucket has the Scandinavian profile. It is made for mini-excavators, for fine grading and finishing work.
Weight class covers your machine
Standard
PSH mini - hydraulic swivelling grading bucket for mini-excavators
A cylinder swivels the PS mini bucket, so you set the angle of the cutting edge from the cab. It finishes slopes and verges in tight places while the machine stays where it is.
Weight class covers your machine
