MARTIN quick coupler system
These are the MARTIN sizes our model tables print. Open a size to see the attachment models that list it. The bracket for your machine is confirmed with your quote.
MARTIN builds this coupler system.
5 sizes, our attachments for 0.6–30 t machines.
We make brackets for this system only. The coupler itself comes from its maker.
MARTIN couplers are sized by an M number. The number sets the pin spacing and the pin diameter the bracket is built to.
Price & lead time Get price & lead timeMARTIN sizes
Which size for my machine weight
Type the operating weight. The sizes our attachments are listed for at that weight are marked.
Attachments in every size
Each number is how many models of that attachment family list the size. An empty cell means the family lists no model in that size.
- RC - root cutterM02: 1M03: 2M10: 2
- RRB - root rake bucket profileM02: 1M03: 2M10: 1
- GP - general purpose digging bucketM02: 2M03: 3M10: 2
- GB - rigid grading & ditching bucket, German profileM02: 2M03: 3M10: 1
- GBH - hydraulic tilt ditching bucket for mini-excavatorM02: 2M03: 3M10: 1
- RGP - skeleton rod GP bucketM02: 1M03: 3M10: 1
All 38 families
- SGP - heavy duty skeleton GP bucketM02: 1M03: 3M10: 1
- GPO - GP bucket with perforated bottomM02: 1M03: 3M10: 1
- GPL - general purpose digging bucketM02: 2M03: 3M10: 2
- GBP - rigid grading & ditching bucket, Italian profileM02: 2M03: 3M10: 2
- GBPH - hydraulic tilting grading & ditching bucketM02: 1M03: 3M10: 2
- RGPL - skeleton rod GPL bucketM02: 1M03: 3M10: 2
- GPLO - GPL bucket with perforated bottomM02: 1M03: 3M10: 2
- SGPL - heavy duty skeleton GPL bucket for mini-excavatorM02: 1M03: 3M10: 2
- DS mini - Scandinavian deep digging bucket for mini-excavatorM02: 1M03: 1M10: 4
- KS mini - cable bucket for mini-excavatorM02: 1M03: 1M10: 2
- KSV mini - Scandinavian profile cable V bucket for mini-excavatorM02: 1M03: 1M10: 2
- CB mini - hydraulic clamp bucket for mini-excavatorM02: 1M03: 3M10: 1
- GKB mini - deep cable digging bucket for mini-excavatorM02: 1M03: 2M10: 1M18: 1
- RGPR - skeleton rod bucketM02: 1M03: 3M10: 2
- LR mini - straight land rakes for mini-excavatorM02: 1M03: 3M10: 2
- LRS - short land rakes for mini-excavatorsM02: 1M03: 2M10: 2M18: 1
- RIP mini - ripper shank for mini-excavatorM02: 1M03: 1M10: 2M18: 1
- MR mini - multi-ripper for mini-excavatorM02: 1M03: 1M10: 3M18: 1
- PS mini - Scandinavian universal grading bucket for mini-excavatorM03: 1M10: 3
- RGB - skeleton rod grading & sorting bucketM03: 3M10: 1M18: 2
- AC mini - asphalt cutter for mini-excavatorM03: 1M10: 2
- DuoRIP - double ripper for root extractionM10: 2M18: 1M26: 1
- DBF - flat-top digging bucket for quick couplerM18: 2M26: 2
- RDBF - flat-top skeleton DBF bucket on rodsM18: 2M26: 2
- GD - rigid grading & ditching bucket, 12–40 tM18: 1M26: 2
- GDH - heavy duty hydraulic grading & ditching bucketM18: 2M26: 3
- DCB - grading & ditching bucket with round profileM18: 2M26: 3
- PS - Scandinavian universal / grading bucketM18: 1M26: 2
- CB - heavy duty hydraulic clamp bucketM18: 2M26: 1
- MR - heavy duty excavator multi-ripperM18: 1M26: 2
- RIP - heavy duty ripperM18: 1M26: 1
- GRB - excavator grading beamM18: 1M26: 1
Sizes
Which coupler is on your machine?
Pick the system on your machine and we put it in your enquiry. We check the bracket before we send the quote.
How to measure your coupler
Not sure which system it is? Three measurements tell us which bracket you need.
- Measure the diameter of both pins.
- Measure the distance between the pin centres.
- Measure the width between the inside faces of the ears.
If the coupler has a make or type printed on it, send that too.
Questions about MARTIN
Which MARTIN sizes do you list attachments for?
5 sizes: M02, M03, M10, M18, M26. Each size card above opens its own page with the attachments in that size.
How do I tell which MARTIN size is on my machine?
Measure the coupler as the steps above show, or send us a photo. We confirm the size with your quote.
Do you make the MARTIN coupler itself?
We make brackets for this system only. The coupler itself comes from its maker.
Send me the spec sheet for a MARTIN size
Pick a size and we email you the spec sheet of our attachments in that size.
Send a MARTIN size to a colleague or dealer
MARTIN: M02
For this system
- We make weld-on adapters for this system, without a plate.
- We make weld-on adapters with a plate for this system.
- We make bolt-on adapters for this system, drilled for the attachment.
- We make bolt-on mounting caps for rock breakers on this system.
- We make lifting adapters for this system, with a hook point for a big bag or another load.
Coupler system names belong to their owners. Sieruta is not affiliated with them. This list refers to the mechanical interface only.