Tools · Rippers & rakes
MR mini - multi-ripper for mini-excavator
- For machines of 1.2–14 t
- Widths 400–1,200 mm
- Couplers: S · MS · M · HS · CW · OQ · Klac C · Klac D · Klac E · F · Klac F
- We usually reply within 1 working day
- We check the fit before we send the quote
- 12 months warranty on manufacturing defects
- Every offer names the dispatch week
- If a bracket we made is wrong and does not fit your machine, we replace it.
Call +48 503 808 636Message us on WhatsAppPhotos and voice notes are welcome.
Standard
MR-mini Multi-Ripper Fleco for mini- & midi-excavator
The whole range: Excavator tools
Compatible interfaces: S · MS · CW · OQ · HS · Klac · M
- 1.2–14 tons
- Carriers: Mini, Midi, Large
A multi-tooth ripper for the mini-excavator: several tines break up compacted ground, frost layer and root mats in one pass, where a single ripper tooth would only cut a slot. It loosens the ground ahead of the bucket, so the bucket works in broken material and not in solid ground.
About this family
Optional Hardox® wear plates on the legs take the wear in place of the legs themselves.
Features
Base features:
- Hardox® legs
- Reinforcement under the tube
- Teeth CAT / BYG / ESCO
- Top plate ready for welding
- Legs 20 to 30 mm thick
Optional features:
- Top plate for bolt-on bracket
- Hardox® wear plates on legs
Dimensions
The letters on the drawing match the columns in the table below.
Dimensions in mm
Which coupler is on your machine?
Pick the system on your machine and we put it in your enquiry. We check the bracket before we send the quote.
How to measure your coupler
Not sure which system it is? Three measurements tell us which bracket you need.
- Measure the diameter of both pins.
- Measure the distance between the pin centres.
- Measure the width between the inside faces of the ears.
If the coupler has a make or type printed on it, send that too.
- Loading machines…
Models and specifications
Figures as printed on this family’s datasheet. A dash means the datasheet does not state that figure.
Datasheet (PDF)- Which bracket does your machine take? See the coupler fit reference
- Looking for your machine by make and model? See the machine fit tables
| Model | Machine class [t] | Width [mm] | Height [mm] | Length [mm] | Number of legs | Spacing [mm] | Leg thickness [mm] | Tooth systems | Quick coupler brackets | Weight [kg] | Get a price |
|---|---|---|---|---|---|---|---|---|---|---|---|
| MRF 25 | 1.2–2.5 | 400 | 401 | 301 | 3 | 156 | 20 | E701 | S30 · MS01 · M02 · M03 · HS02 · CW00 · CW05 · OQ40 · Klac C | 36 | Get a price |
| MRF 40 | 2.5–4.0 | 600 | 465 | 319 | 4 | 183 | 20 | E701 | S40 · MS03 · M10 · HS03 · CW05 · OQ40 · Klac D | 62 | Get a price |
| MRF 40 | 2.5–4.0 | 800 | 465 | 319 | 4 | 230 | 20 | E701 | S40 · MS03 · M10 · HS03 · CW05 · OQ40 · Klac D | 69 | Get a price |
| MRF 75 | 4.0–7.5 | 800 | 554 | 381 | 5 | 185 | 25 | J200 | S40 · MS03 · MS08 · M10 · HS06 · CW10 · OQ45 · Klac E · F | 117 | Get a price |
| MRF 75 | 4.0–7.5 | 1000 | 554 | 381 | 5 | 210 | 25 | J200 | S40 · MS03 · MS08 · M10 · HS06 · CW10 · OQ45 · Klac E · F | 121 | Get a price |
| MRF 140 | 7.5–14.0 | 1000 | 710 | 505 | 6 | 186 | 30 | J200 | S45 · S50 · S60 · MS08 · MS10 · M10 · M18 · HS08 · CW10 · CW20 · OQ60 · Klac F | 221 | Get a price |
| MRF 140 | 7.5–14.0 | 1200 | 710 | 505 | 6 | 196 | 30 | J200 | S45 · S50 · S60 · MS08 · MS10 · M10 · M18 · HS08 · CW10 · CW20 · OQ60 · Klac F | 228 | Get a price |
→ Scroll the table sideways to see every model.
Compliance, certification & documentation
- EN ISO 3834-2Certified welding qualityCSW/1293/2025
- EN 1090-1 EXC1 + EXC2Factory production control1433-CPR-0257
- EN ISO 9606-1 · WPQR EN ISO 15614Qualified welders and procedures
- EN ISO 9712: VT + PT level 2Non-destructive testingwhere the drawing or inspection plan requires it
- EN 10204 3.1Material traceability
- CE: 2006/42/ECCE markingTransition to Regulation (EU) 2023/1230 underway. Applicable from 20 January 2027.
- Materials
- Standard: Legs: Hardox®
Warranty
12 months warranty on manufacturing defects in the components Sieruta makes itself.
Normal wear, misuse or overloading and unauthorised modifications are not covered. Warranty terms and claims
Why buy from the factory
- Cutting, machining, welding and painting on one site, our own factory in Poland, EU
- More than 50,000 attachments delivered since 2008
- A record for every serial number, so the spare parts match your attachment
Request a quote
Tell us your machine and the job. An engineer checks the fit, and we usually reply within 1 working day.
More from this family group
Standard
MR - Heavy duty excavator multi-ripper
The MR multi-ripper enters the ground on several legs at once and breaks up and loosens compacted material.
Fits your machine
Standard
RIP - Heavy duty ripper
A single shank made of high-strength steel, with a protector over the shank. It breaks up hard soil, rock and frozen ground, so the material can then be loaded with an ordinary digging bucket.
Fits your machine
Standard
DuoRIP - double ripper for root extraction
Two shanks go deep into the ground at once. It rips out root systems, large roots and stumps when land is cleared for a site.
Fits your machine
Standard
RC - Root cutter
Three sizes, from 13 to 47 kg, each fitting the quick-coupler brackets in its table. It cuts roots on excavators from 0.6 to 10 t.
Fits your machine
Standard
RRB - Root rake bucket profile
Tines set in a bucket-shaped frame rake out roots and stones, then carry and dump what they collect. Clearing and loading are done in the same pass.
Fits your machine
Configured
RRH - Root rake with hydraulic clamp
A root rake with a hydraulic top clamp: it pulls out roots and holds them against the tines.
Fits your machine
