Tools · Rippers & rakes
DuoRIP - double ripper for root extraction
- For machines of 2.5–30 t
- Widths 365–500 mm
- Couplers: S · MS · CW · OQ · M · SW
- We usually reply within 1 working day
- We check the fit before we send the quote
- 12 months warranty on manufacturing defects in the components Sieruta makes itself
- Every offer names the dispatch week
- If a bracket we made is wrong and does not fit your machine, we replace it.
Call +48 503 808 636Message us on WhatsAppPhotos and voice notes are welcome.
Models and specifications
Figures as printed on this family’s datasheet. A dash means the datasheet does not state that figure.
Datasheet (PDF)- Which bracket does your machine take? See the coupler fit reference
- Looking for your machine by make and model? See the machine fit tables
| Model | Machine class [t] | Width [mm] | Height [mm] | Length [mm] | Tip radius [mm] | Tooth systems | Quick coupler brackets | Weight [kg] | |
|---|---|---|---|---|---|---|---|---|---|
| Duo-Ripper-6 | 2.5–6.0 | 365 | 656 | 678 | 695 | J200, V13 | S40 · MS03 · CW05 · CW10 · OQ40 · M10 | 102 | Price & lead time |
| Duo-Ripper-12 | 6.0–12 | 450 | 852 | 880 | 900 | J200, V17, U20 | S45 · S50 · MS08 · MS10 · CW10 · OQ45 · M10 | 220 | Price & lead time |
| Duo-Ripper-18 | 12–18 | 450 | 1109 | 1072 | 1168 | J250, V19, U20 | S60 · MS10 · CW20 · OQ60 · OQ65 · M18 · S1 · SW33 | 380 | Price & lead time |
| Duo-Ripper-30 | 18–30 | 500 | 1267 | 1262 | 1372 | J300, V23, U25 | S70 · MS21 · CW30 · CW40 · OQ70 · M26 · S2 · SW48 | 565 | Price & lead time |
→ Scroll the table sideways to see every model.
Standard
The whole range: Excavator tools
Compatible interfaces: S · MS · CW · OQ · M · SW
- 2.5–30 tons
- Carriers: Mini, Midi, Large
The DuoRIP is a double ripper for excavators. Its two shanks go deep into the ground and rip out root systems, so it clears large roots, stumps and debris when land is cleared and a site is prepared.
Features
- Two shanks for pulling out roots
- Steel build
- Bracket sizes: S40, MS03, CW05 and OQ40 on the smallest size, up to S70, MS21, CW40, OQ70 and SW48 on the largest
- Available teeth systems: CAT J series, BYG Super V, ESCO UltraLok
- Four sizes: 2.5 to 30 t machines, 102 to 565 kg, 365 to 500 mm wide
- Tip radius 695 to 1372 mm
- Direct mount or quick coupler: S, MS, CW, OQ, M and SW brackets
- Wear plates on sides, front cutting edge
From the catalogue
About this family
Four sizes cover machines from 2.5 to 30 t: Duo-Ripper-6 at 102 kg, Duo-Ripper-12 at 220 kg, Duo-Ripper-18 at 380 kg and Duo-Ripper-30 at 565 kg. Width runs from 365 to 500 mm. The tip radius runs from 695 to 1372 mm.
The teeth are standard systems: CAT J series, BYG Super V or ESCO UltraLok, sized to the tool.
It mounts direct or on a quick coupler. Brackets go from S40, MS03, CW05 and OQ40 on the smallest size up to S70, MS21, CW40, OQ70 and SW48 on the largest.
Dimensions
The letters on the drawing match the columns in the table below.
Dimensions in mm
Typical jobs
The double ripper attachment is used for:
- Land clearing and site preparation where there are many thick roots
- Removing large roots, stumps and debris
- Preparing land for building
- Forestry work pulling roots out of the ground
- Any job where roots have to be pulled out of the ground
The double ripper is made for land clearing. Contact us and we will help you find the right fit for your machine.
Compliance, certification & documentation
- EN ISO 3834-2Certified welding qualityCSW/1293/2025
- EN 1090-1 EXC1 + EXC2Factory production control1433-CPR-0257
- EN ISO 9606-1 · WPQR EN ISO 15614Qualified welders and procedures
- EN ISO 9712: VT + PT level 2Non-destructive testingwhere the drawing or inspection plan requires it
- EN 10204 3.1Material traceability
- CE: 2006/42/ECCE markingTransition to Regulation (EU) 2023/1230 underway. Applicable from 20 January 2027.
Warranty
12 months warranty on manufacturing defects in the components Sieruta makes itself.
Normal wear, misuse or overloading and unauthorised modifications are not covered. Warranty terms and claims
Why buy from the factory
- Cutting, machining, welding and painting on one site, our own factory in Poland, EU
- More than 50,000 attachments delivered since 2008
- A record for every serial number, so the spare parts match your attachment
Request a quote
Tell us your machine and the job. An engineer checks the fit, and we usually reply within 1 working day.
More from this family group
Standard
MR - Heavy duty excavator multi-ripper
The MR multi-ripper enters the ground on several legs at once and breaks up and loosens compacted material.
Fits your machine
Standard
RIP - Heavy duty ripper
A single shank made of high-strength steel, with a protector over the shank. It breaks up hard soil, rock and frozen ground, so the material can then be loaded with an ordinary digging bucket.
Fits your machine
Standard
RC - Root cutter
Three sizes, from 13 to 47 kg, each fitting the quick-coupler brackets in its table. It cuts roots on excavators from 0.6 to 10 t.
Fits your machine
Standard
RRB - Root rake bucket profile
Tines set in a bucket-shaped frame rake out roots and stones, then carry and dump what they collect. Clearing and loading are done in the same pass.
Fits your machine
Configured
RRH - Root rake with hydraulic clamp
A root rake with a hydraulic top clamp: it pulls out roots and holds them against the tines.
Fits your machine
Standard
LR mini - straight land rakes for mini-excavator
Tines instead of a solid shell pull out roots, brush and stones while the soil falls back through. A plot is cleared before levelling without carting away the topsoil.
Fits your machine
