Tools · Rippers & rakes
RC - root cutter
- For machines of 0.6–10 t
- Widths 170–250 mm
- Couplers: S-System · Lehnhoff MS · MARTIN M · Wacker Neuson HS · Verachtert CW · Klac
- We usually reply within 1 working day
- We check the fit before we send the quote
- 12 months warranty on manufacturing defects in the components Sieruta makes itself
- Every offer names the dispatch week
- If a bracket we made is wrong and does not fit your machine, we replace it.
Call +48 503 808 636Message us on WhatsAppPhotos and voice notes are welcome.
Models and specifications
Figures as printed on this family’s datasheet. A dash means the datasheet does not state that figure.
Datasheet (PDF)- Which bracket does your machine take? See the coupler fit reference
- Looking for your machine by make and model? See the machine fit tables
| Model | Machine class [t] | Width [mm] | Height [mm] | Quick coupler brackets | Weight [kg] | |
|---|---|---|---|---|---|---|
| Root cutter-2 | 0.6–4.0 | 170 | 265 | S30 · S40 · MS01 · MS03 · M02 · M03 · HS02 · HS03 · CW05 · Klac D · Klac E | 13 | Price & lead time |
| Root cutter-6 | 4.0–6.0 | 200 | 325 | S40 · MS03 · MS08 · M03 · M10 · HS06 · CW10 · Klac D · Klac E | 20 | Price & lead time |
| Root cutter-10 | 6.0–10 | 250 | 420 | S40/240 · S45 · S50 · MS08 · M10 · HS06 · HS08 · CW10 · Klac F | 47 | Price & lead time |
→ Scroll the table sideways to see every model.
Standard
The whole range: Excavator tools
Compatible interfaces: S · MS · CW · HS · Klac · M
- 0.6–10 tons
- Carriers: Mini, Midi
Root cutter for excavators from 0.6 to 10 t. It comes in three sizes, matched to a machine class in the table below: 13 kg for 0.6 to 4 t, 20 kg for 4 to 6 t and 47 kg for 6 to 10 t.
From the catalogue
About this family
Each size fits the quick coupler brackets listed in the same table. The blade is narrow, 170 to 250 mm, so the machine’s force lands on a short edge and it cuts a root off instead of tearing it out with the soil.
Dimensions
Drawing dimensions: H height, L length, W width, as in the model table.
Dimensions in mm
Compliance, certification & documentation
- EN ISO 3834-2Certified welding qualityCSW/1293/2025
- EN 1090-1 EXC1 + EXC2Factory production control1433-CPR-0257
- EN ISO 9606-1 · WPQR EN ISO 15614Qualified welders and procedures
- EN ISO 9712: VT + PT level 2Non-destructive testingwhere the drawing or inspection plan requires it
- EN 10204 3.1Material traceability
- CE: 2006/42/ECCE markingTransition to Regulation (EU) 2023/1230 underway. Applicable from 20 January 2027.
Warranty
12 months warranty on manufacturing defects in the components Sieruta makes itself.
Normal wear, misuse or overloading and unauthorised modifications are not covered. Warranty terms and claims
Why buy from the factory
- Cutting, machining, welding and painting on one site, our own factory in Poland, EU
- More than 50,000 attachments delivered since 2008
- A record for every serial number, so the spare parts match your attachment
Request a quote
Tell us your machine and the job. An engineer checks the fit, and we usually reply within 1 working day.
More from this family group
RRB Root rake bucket profile
Tines set in a bucket-shaped frame rake out roots and stones, then carry and dump what they collect. Clearing and loading are done in the same pass.
RIP mini - ripper shank for mini-excavator
Mini-excavator rippers break up hard ground before trenching and foundation work.
MR Heavy duty excavator multi-ripper
The MR multi-ripper enters the ground on several legs at once and breaks up and loosens compacted material.
RIP Heavy duty ripper
A single shank made of high-strength steel, with a protector over the shank. It breaks up hard soil, rock and frozen ground, so the material can then be loaded with an ordinary digging bucket.
DuoRIP - double ripper for root extraction
Two shanks go deep into the ground at once. It rips out root systems, large roots and stumps when land is cleared for a site.
RRH Root rake with hydraulic clamp
A root rake with a hydraulic top clamp: it pulls out roots and holds them against the tines.
