Tools · Rippers & rakes
RIP mini - ripper shank for mini-excavator
- For machines of 0.8–14 t
- Couplers: S-System · Lehnhoff MS · MARTIN M · Wacker Neuson HS · Verachtert CW · OilQuick OQ · Klac
- We usually reply within 1 working day
- We check the fit before we send the quote
- 12 months warranty on manufacturing defects in the components Sieruta makes itself
- Every offer names the dispatch week
- If a bracket we made is wrong and does not fit your machine, we replace it.
Call +48 503 808 636Message us on WhatsAppPhotos and voice notes are welcome.
Models and specifications
Figures as printed on this family’s datasheet. A dash means the datasheet does not state that figure.
Datasheet (PDF)- Which bracket does your machine take? See the coupler fit reference
- Looking for your machine by make and model? See the machine fit tables
| Model | Machine class [t] | Height [mm] | Length [mm] | Tip radius [mm] | T [mm] | Tooth systems | Quick coupler brackets | Weight [kg] | |
|---|---|---|---|---|---|---|---|---|---|
| Ripper-2.5 | 0.8–2.5 | 387 | 409 | 431 | 35 | V13 | S30 · MS01 · M02 · M03 · HS02 · CW00 · CW05 · OQ40 · Klac C | 21 | Price & lead time |
| Ripper-5.5 | 2.5–5.5 | 480 | 524 | 543 | 60 | V19 | S40 · MS03 · M10 · HS03 · CW05 · CW10 · OQ40 · Klac D · Klac E | 51 | Price & lead time |
| Ripper-10 | 5.5–10 | 673 | 586 | 740 | 60 | V23 | S40/240 · S45 · S50 · MS08 · M10 · HS06 · HS08 · CW10 · OQ45 · Klac F | 98 | Price & lead time |
| Ripper-14 | 10–14 | 880 | 785 | 910 | 75 | V23 | S60 · MS10 · M18 · HS08 · CW20 · OQ60 | 221 | Price & lead time |
→ Scroll the table sideways to see every model.
Standard
RIP-mini Ripper Shank for mini- & midi-excavator
The whole range: Excavator tools
Compatible interfaces: S · MS · CW · OQ · HS · Klac · M
- 0.8–14 tons
- Carriers: Mini, Midi, Large
The RIP mini is a ripper shank for mini-excavators. It opens ground a bucket cannot enter: frozen and frost-heaved soil, compacted clay, stony fill, thin concrete and asphalt.
Features
- Shank profile for the mini class: depth without unsettling the machine
- Replaceable tip: change the tip, not the tool, and match the tip to the material
- Narrow profile: the working point stays in view in confined spaces
- One tool, three jobs: breaking, root pulling and frost ripping
- Standard quick couplers: on and off between tasks
Base features:
- Two versions: Hardox® body / S355 body + HB wear pads
- Reinforced top plate
- Ripper teeth with a replaceable tip
- Dimensions and angle sized for the mini class
Optional features:
- Hardox® wear plates
- Sharpened body
- Other types of teeth
From the catalogue
About this family
The shank is shaped for the mini class, so it reaches depth without pulling the machine off balance. Its narrow profile keeps the working point in view, which matters when you rip beside a kerb, a pipe run or a wall.
The tip is replaceable. When it wears you change the tip and not the tool, and you can fit a different tip for a different material.
Ripping forces go into the shank body and a reinforced top plate. Two versions are built: a Hardox® body, or an S355 body with HB wear plates.
The same tool pulls roots in landscaping and works as a frost hook in winter. It mounts on standard quick couplers, so it goes on and off between tasks.
Dimensions
Drawing dimensions: H height, L length, W width, as in the model table.
Dimensions in mm
Typical jobs
- Breaking up compacted soil and clay
- Demolition of concrete slabs and foundations
- Root removal in landscaping and land clearing
- Frost ripping in cold climates
- Trenching in rocky or compacted terrain
- Asphalt removal in road maintenance
- Selective breaking in sensitive areas or archaeological sites
Compliance, certification & documentation
- EN ISO 3834-2Certified welding qualityCSW/1293/2025
- EN 1090-1 EXC1 + EXC2Factory production control1433-CPR-0257
- EN ISO 9606-1 · WPQR EN ISO 15614Qualified welders and procedures
- EN ISO 9712: VT + PT level 2Non-destructive testingwhere the drawing or inspection plan requires it
- EN 10204 3.1Material traceability
- CE: 2006/42/ECCE markingTransition to Regulation (EU) 2023/1230 underway. Applicable from 20 January 2027.
- Materials
- Standard: Body: Hardox® or S355
Warranty
12 months warranty on manufacturing defects in the components Sieruta makes itself.
Normal wear, misuse or overloading and unauthorised modifications are not covered. Warranty terms and claims
Why buy from the factory
- Cutting, machining, welding and painting on one site, our own factory in Poland, EU
- More than 50,000 attachments delivered since 2008
- A record for every serial number, so the spare parts match your attachment
Request a quote
Tell us your machine and the job. An engineer checks the fit, and we usually reply within 1 working day.
More from this family group
MR Heavy duty excavator multi-ripper
The MR multi-ripper enters the ground on several legs at once and breaks up and loosens compacted material.
RIP Heavy duty ripper
A single shank made of high-strength steel, with a protector over the shank. It breaks up hard soil, rock and frozen ground, so the material can then be loaded with an ordinary digging bucket.
DuoRIP - double ripper for root extraction
Two shanks go deep into the ground at once. It rips out root systems, large roots and stumps when land is cleared for a site.
RC Root cutter
Three sizes, from 13 to 47 kg, each fitting the quick-coupler brackets in its table. It cuts roots on excavators from 0.6 to 10 t.
RRB Root rake bucket profile
Tines set in a bucket-shaped frame rake out roots and stones, then carry and dump what they collect. Clearing and loading are done in the same pass.
RRH Root rake with hydraulic clamp
A root rake with a hydraulic top clamp: it pulls out roots and holds them against the tines.
