Tools · Rippers & rakes
RIP - heavy duty ripper
Standard
RIP Ripper with protector for excavator
Compatible interfaces: S60 · S70 · S80 · S90 · MS10 · MS21 · MS25 · CW20 · CW30 · CW40 · CW45 · CW55 +12
- 14–65 tons
- On request
- Carriers: Standard, Heavy
The RIP is a single shank ripper for excavators, with a protector over the shank. It opens ground a bucket cannot enter: compacted soil, frost, hard clay, soft rock and old surfaces. It also cuts roots and lifts stumps. The ripped material stays where it is and is loaded afterwards with an ordinary digging bucket.
About this family
Rippers for large excavators, for breaking up hard ground
The shank is 75 mm thick in every size, the front edge carries a protector, and the point is a CAT 9W-2451, a common replaceable tooth.
Four sizes are built. Ripper-C for machines of 14 to 18 t weighs 280 kg, Ripper-D for 19 to 29 t weighs 403 kg, Ripper-E for 30 to 40 t weighs 490 kg, and Ripper-H for 40 to 65 t weighs 684 kg. The length, tip and height of each size are in the model table on this page.
It mounts direct on the stick or on a quick coupler bracket: S60 to S90, MS10 to MS25, CW20 to CW55, OQ65 to OQ90, M18 and M26, S1 to S3, SW33 to SW66.
Features
- Ripping Hard Ground: The single shank breaks up tough soil, rock and frozen ground.
- Loading: The ripper breaks material up and the loosened material is loaded afterwards.
- Material: Made of high-strength steel.
- Four sizes: Ripper-C 14 to 18 t at 280 kg, Ripper-D 19 to 29 t at 403 kg, Ripper-E 30 to 40 t at 490 kg, Ripper-H 40 to 65 t at 684 kg
- 75 mm shank with a protector and a CAT 9W-2451 point in every size
- Direct fit or quick coupler: S60 to S90, MS10 to MS25, CW20 to CW55, OQ65 to OQ90, M18, M26, S1 to S3, SW33 to SW66
Dimensions
The letters on the drawing match the columns in the table below.
Dimensions in mm
Typical jobs
- Breaking up compacted soil and rock
- Ripping through frozen ground
- Excavating in mining and quarrying operations
- Land clearing and stump removal
- Trenching in hard soil conditions
Models and specifications
Figures as printed on this family’s datasheet. A dash means the datasheet does not state that figure.
Datasheet (PDF)| Model | Machine class [t] | Height [mm] | Length [mm] | Tip radius [mm] | T [mm] | Tooth systems | Quick coupler brackets | Weight [kg] |
|---|---|---|---|---|---|---|---|---|
| Ripper-C | 14–18 | 928 | 823 | 991 | 75 | 9W-2451 | S60 · MS10 · CW20 · OQ65 · M18 · S1 · SW33 | 280 |
| Ripper-D | 19–29 | 1058 | 923 | 1114 | 75 | 9W-2451 | S70 · MS21 · CW30 · CW40 · OQ70 · OQ70-55 · M26 · S2 · SW48 | 403 |
| Ripper-E | 30–40 | 1170 | 893 | 1204 | 75 | 9W-2451 | S80 · MS25 · CW45 · OQ80 · S3 · SW48 | 490 |
| Ripper-H | 40–65 | 1402 | 1063 | 1425 | 75 | 9W-2451 | S90 · CW55 · OQ90 · SW66 | 684 |
→ Scroll the table sideways to see every model.
Compliance, certification & documentation
- EN ISO 3834-2Certified welding qualityCSW/1293/2025
- EN 1090-1 EXC1 + EXC2Factory production control1433-CPR-0257
- EN ISO 9606-1 · WPQR EN ISO 15614Qualified welders and procedures
- EN ISO 9712: VT + PT level 2Non-destructive testingwhere the drawing or inspection plan requires it
- EN 10204 3.1Material traceability
- CE: 2006/42/ECCE markingTransition to Regulation (EU) 2023/1230 underway. Applicable from 20 January 2027.
Warranty
Sieruta covers manufacturing defects in the components it makes itself.
Normal wear, misuse or overloading and unauthorised modifications are not covered. Warranty terms and claims
Request a quote
Tell us your machine and the job. An engineer checks the fit, and we usually reply within 24–48 hours.
More from this family group
Standard
MR - heavy duty excavator multi-ripper
The MR multi-ripper enters the ground on several legs at once and breaks up and loosens compacted material.
On requestView product
Standard
DuoRIP - double ripper for root extraction
Two shanks go deep into the ground at once. It rips out root systems, large roots and stumps when land is cleared for a site.
On requestView product
Standard
RC - root cutter
Three sizes, from 13 to 47 kg, each fitting the quick-coupler brackets in its table. It cuts roots on excavators from 0.6 to 10 t.
On requestView product
Standard
RRB - root rake bucket profile
Tines set in a bucket-shaped frame rake out roots and stones, then carry and dump what they collect. Clearing and loading are done in the same pass.
On requestView product
Configured
RRH - root rake with hydraulic clamp
A root rake with a hydraulic top clamp: it pulls out roots and holds them against the tines.
On requestView product
Standard
LR mini - straight land rakes for mini-excavator
Tines instead of a solid shell pull out roots, brush and stones while the soil falls back through. A plot is cleared before levelling without carting away the topsoil.
On requestView product
