Attachments for the Volvo EWR130E weight range
- Bucket line
- DB - heavy duty digging bucket500–1200 mm wide
- We usually reply within 1 working day
- We check the fit before we send the quote
- Every offer names the dispatch week
- If a bracket we made is wrong and does not fit your machine, we replace it.
Catalogue sizes for the EWR130E
Each size below has a catalogue row rated for a carrier of 12,900 – 14,400 kg operating weight. Tell us which sizes you want and we reply with an offer.
On a narrow screen the table scrolls sideways.
Welded to EN ISO 3834-2. Agree it as a standing term of supply and the EN 10204 3.1 certificate ships with every attachment. You also get the CE declaration of conformity for every product that carries the CE mark.
Message us on WhatsAppPhotos and voice notes are welcome.For publishers: cite or embed this table
Cite this table as https://sieruta.com/en/fit/volvo/volvo-ewr130e, figures as of 2026-09-10.
Embed this table on your site
Copy the HTML below into your page. It keeps the link back to this page and the date of the figures.
Sizes are matched to the published operating weight of the EWR130E.
- Weight Class
- Large Excavator (12–30 t)
- Operating Weight
- 12,900 – 14,400 kg
- Family-owned group, founded in 1996
- More than 50,000 attachments delivered
- Built in our own factory in Poland
Operating weight as published by Volvo, retrieved 2026-09-10. Source
Start here
The attachments buyers in your market ask for first, sized for the EWR130E.
Which coupler is on your machine?
Pick the system on your machine and we put it in your enquiry. We check the bracket before we send the quote.
How to measure your coupler
Not sure which system it is? Three measurements tell us which bracket you need.
- Measure the diameter of both pins.
- Measure the distance between the pin centres.
- Measure the width between the inside faces of the ears.
If the coupler has a make or type printed on it, send that too.
Send me the spec sheet for my machine
Pick a bucket line and we email you its spec sheet, with the sizes we build for the EWR130E.
Send this answer to a colleague or dealer
Volvo EWR130E: DBF - flat-top digging bucket for quick coupler (DBF-160)
EWR130E at a glance
| Figure | Value | Source |
|---|---|---|
| Max dig depth | 5,100 mm | maker's website (volvoce.com) |
| Max reach | 8,570 mm | maker's document (volvoce.com) |
| Max dump height | 7,390 mm | maker's document (volvoce.com) |
| Arm length | 2,100–2,400 mm | maker's document (volvoce.com) |
| Main pump flow | 275 l/min | maker's document (volvoce.com) |
| Auxiliary flow | 200 l/min | maker's document (volvoce.com) |
| Bucket capacity | 0.27–0.66 m³ | maker's document (volvoce.com) |
| Lift capacity | 3,800 kg | maker's document (volvoce.com) |
| Quick coupler | S50 & S60 system | maker's document (volvoce.com) |
| Transport width | 2,540 mm | maker's document (volvoce.com) |
Only figures the maker publishes for this model. Where a figure is missing, no value is shown.
What the EWR130E figures mean for its attachments
- Its auxiliary circuit delivers 200 l/min. A breaker, auger, tilt rotator or other hydraulic tool states the oil flow it needs, so choose one whose range includes this figure.
- The main pump delivers up to 275 l/min at 325 bar. That is the pump output of the whole machine, not the flow an attachment gets.
- Volvo lists this quick coupler for it: S50 & S60 system. The bracket on every attachment has to match the coupler.The attachments we build with S50 bracketsThe attachments we build with S60 brackets
- It digs down to 5,100 mm. That is the deepest trench it can open.
- Its maximum reach is 8,570 mm.
- It dumps at up to 7,390 mm, so a truck or skip side has to sit below that height.
- Volvo offers arms from 2,100 to 2,400 mm. A longer arm reaches further, a shorter one handles a heavier bucket.
- Volvo lists bucket capacities from 0.27 to 0.66 m³.
- Bucket breakout force is 108.5 kN. That is the force a bucket or ripper works with at the tooth.
- Volvo gives a lifting capacity of 3,800 kg. Check a heavy grab or hammer, plus its load, against the full load chart.
- Its tail swing radius is 1,550 mm, which matters beside a wall or in a live traffic lane.
- For transport it measures 8,010 x 2,540 x 3,050 mm (length, width, height).
- Engine power is 90 kW.
Figures as published by Volvo in its own documents.
How the EWR130E compares with its neighbours
The nearest models by weight, with the difference to the EWR130E in parentheses where both makers publish the figure.
| Model | Operating weight | Max dig depth | Main pump flow |
|---|---|---|---|
| EWR130E | 12.9 t | 5,100 mm | 275 l/min |
| Volvo EC140E | 13.17 t (+0.27 t) | 5,560 mm (+460) | 248 l/min (-27) |
| Volvo ECR145E | 14.435 t (+1.535 t) | 5,530 mm (+430) | 248 l/min (-27) |
| Komatsu PW118MR-11 | 12.88 t (-0.02 t) | 4,330 mm (-770) | 229 l/min (-46) |
Figures as each maker publishes them. A difference is shown only where both machines have a published value.
EWR130E: what the brochure names
Features Volvo names in its own brochure for the EWR130E. Some of them may be optional, so check the machine's spec before you order.
- A short tail swing, for work next to walls and traffic.
- Use with a tiltrotator.
- Telematics for tracking the machine remotely (CareTrack).
- An engine that meets EU Stage V.
From Volvo's published brochure. We keep the source document on file.
Questions about the EWR130E
- What bucket size fits the EWR130E?
- Volvo lists bucket capacities from 0.27 to 0.66 m³ for it.
- Which quick coupler is installed on your EWR130E?
- Volvo lists this coupler for it: S50 & S60 system. Order attachments with the matching bracket.
- Can the EWR130E run a hydraulic attachment?
- Yes, if the tool's rated oil flow range includes the 200 l/min of its auxiliary circuit.
Each family shows its candidate models by operating-weight range.
Digging & sorting buckets
- DB - heavy duty digging bucket
DB-160 · 5 width variants
- SDB - heavy duty skeleton DB bucket
SDB-160 · 2 width variants
- DBF - flat-top digging bucket for quick coupler
DBF-160 · 5 width variants
- RDBF - flat-top skeleton DBF bucket on rods
RDBF-160 · 2 width variants
- DSX - Nordic heavy duty digging bucket
DS-HD-190 · 3 width variants
Ditching, grading, sloping buckets
- GD - rigid grading & ditching bucket, 12–40 t
GD-160 · 3 width variants
- GDH - heavy duty hydraulic grading & ditching bucket
GDH-160 · 3 width variants
- SB - Dutch profile grading & ditching bucket
SB-160 · 4 width variants
- DCB - grading & ditching bucket with round profile
DCB-160 · 3 width variants
- PS - Scandinavian universal / grading bucket
PS-160 · 5 width variants
- PSH - hydraulic swivelling grading bucket
PS-160 · 5 width variants
Non-bucket attachments
- TH - hydraulic thumb for excavator
TH-16
- AC - excavator asphalt cutters
AC-18
- MR - heavy duty excavator multi-ripper
MR-17
- RIP - heavy duty ripper
Ripper-C
- DuoRIP - double ripper for root extraction
Duo-Ripper-18
- GRB - excavator grading beam
GRB midi · 6 variants, GRB maxi · 6 variants
Other mini-ex attachments
- LRS - short land rakes for mini-excavators
LRS-15
- RIP mini - ripper shank for mini-excavator
Ripper-14
- MR mini - multi-ripper for mini-excavator
MRF 140 · 2 width variants
- QC-S - S-System Scandinavian quick-coupler
QC-S60, QC-U-S60
- CW - CW-System compatible quick-coupler
CW-20, CW-20 S, CW-U-20, CW-U-20 S
- QC-HS / QC-MS - MS-System compatible quick-coupler
QC-HS-10, QC-MS-10, QC-U-HS-10
- QC-PG - pin-grabber quick-coupler for factory brackets
QC-PG-60, QC-PG-65, QC-ML-M-55, QC-ML-M-60, QC-ML-M-65, QC-U-PG-60, QC-U-PG-65
Volvo EWR130E: machine data
- Operating weight
- 12,900 – 14,400 kg
- Engine power
- 90 kW
- Maximum digging depth
- 5,100 mm
- Maximum dump height
- 7,390 mm
- Bucket breakout force
- 108.5 kN
- Tail swing radius
- 1,550 mm
- Quick coupler
- S50 & S60 system
- Auxiliary circuit flow
- 200 l/min
As published by Volvo, retrieved 2026-09-17. Source
Before you order: check the interface
The weight class of the Volvo EWR130E sizes the attachment. It does not tell you the pin diameter, the pin spacing or the stick width, and those decide whether an attachment fits. Measure them on the machine, or send us the measurements of the bucket it runs today.
At this weight the choice is mostly about the material. A general purpose bucket suits soil and gravel, a reinforced bucket with thicker wear parts suits mixed ground and broken rock, and the quick coupler on the machine sets the bracket every attachment needs.
Quick coupler brackets at this weight
In our model tables, the attachments listed for the Volvo EWR130E at its weight are built with these brackets. Each code opens the models that list it.
- Measure the diameter of both bucket pins.
- Measure the distance between the pin centres.
- Measure the inside width between the stick ears.
- If the machine runs a quick coupler, note its make and type.
What these terms mean:
How to choose an attachment for the job:
Other Volvo models of a similar weight
Other makes of a similar weight
Operating weight within 2 t of the Volvo EWR130E.
Other Volvo models with the same coupler brackets
Our model tables give these machines the same quick coupler brackets.
Why buy from the factory
- Cutting, machining, welding and painting on one site, our own factory in Poland, EU
- More than 50,000 attachments delivered since 2008
- A record for every serial number, so the spare parts match your attachment
Need Custom Specifications?
We can manufacture attachments to your exact pin spacing and requirements for Volvo EWR130E.
Welded to EN ISO 3834-2. Agree it as a standing term of supply and the EN 10204 3.1 certificate ships with every attachment. You also get the CE declaration of conformity for every product that carries the CE mark.
Do you sell Volvo machines? Machine dealer supply
Machine makes and model names belong to their owners. Sieruta is not affiliated with them. We use the names only to show which machines we offer attachments for, by operating weight.