Attachments for the Mecalac 136MRail weight range
- Bucket line
- DB - heavy duty digging bucket500–1200 mm wide
- We usually reply within 1 working day
- We check the fit before we send the quote
- Every offer names the dispatch week
- If a bracket we made is wrong and does not fit your machine, we replace it.
Catalogue sizes for the 136MRail
Each size below has a catalogue row rated for a carrier of 12,830 kg operating weight. Tell us which sizes you want and we reply with an offer.
On a narrow screen the table scrolls sideways.
Welded to EN ISO 3834-2. Agree it as a standing term of supply and the EN 10204 3.1 certificate ships with every attachment. You also get the CE declaration of conformity for every product that carries the CE mark.
Message us on WhatsAppPhotos and voice notes are welcome.For publishers: cite or embed this table
Cite this table as https://sieruta.com/en/fit/mecalac/mecalac-136mrail, figures as of 2026-09-11.
Embed this table on your site
Copy the HTML below into your page. It keeps the link back to this page and the date of the figures.
Sizes are matched to the published operating weight of the 136MRail.
- Weight Class
- Large Excavator (12–30 t)
- Operating Weight
- 12,830 kg
- Family-owned group, founded in 1996
- More than 50,000 attachments delivered
- Built in our own factory in Poland
Operating weight as published by Mecalac, retrieved 2026-09-11. Source
Start here
The attachments buyers in your market ask for first, sized for the 136MRail.
Which coupler is on your machine?
Pick the system on your machine and we put it in your enquiry. We check the bracket before we send the quote.
How to measure your coupler
Not sure which system it is? Three measurements tell us which bracket you need.
- Measure the diameter of both pins.
- Measure the distance between the pin centres.
- Measure the width between the inside faces of the ears.
If the coupler has a make or type printed on it, send that too.
Send me the spec sheet for my machine
Pick a bucket line and we email you its spec sheet, with the sizes we build for the 136MRail.
Send this answer to a colleague or dealer
Mecalac 136MRail: DBF - flat-top digging bucket for quick coupler (DBF-160)
136MRail at a glance
| Figure | Value | Source |
|---|---|---|
| Arm length | 2,025 mm | maker's document (mecalac.com) |
| Main pump flow | 150 l/min | maker's document (mecalac.com) |
| Auxiliary flow | 120 l/min | maker's document (mecalac.com) |
| Auxiliary pressure | 300 bar | maker's document (mecalac.com) |
| Quick coupler | CONNECT HYDRAULIC QUICK COUPLER | maker's document (mecalac.com) |
Only figures the maker publishes for this model. Where a figure is missing, no value is shown.
What the 136MRail figures mean for its attachments
- Its auxiliary circuit is rated at 120 l/min and 300 bar. A breaker, auger, tilt rotator or other hydraulic tool states the oil flow it needs, so choose one whose range includes this figure.
- The main pump delivers up to 150 l/min at 300 bar. That is the pump output of the whole machine, not the flow an attachment gets.
- Mecalac lists this quick coupler for it: CONNECT HYDRAULIC QUICK COUPLER. The bracket on every attachment has to match the coupler.
- Its arm is 2,025 mm long.
- Engine power is 55.4 kW.
Figures as published by Mecalac in its own documents.
How the 136MRail compares with its neighbours
The nearest models by weight, with the difference to the 136MRail in parentheses where both makers publish the figure.
| Model | Operating weight | Main pump flow | Auxiliary flow |
|---|---|---|---|
| 136MRail | 12.83 t | 150 l/min | 120 l/min |
| Mecalac 15MWR | 14.218 t (+1.388 t) | 270 l/min (+120) | 180 l/min (+60) |
| Mecalac 15MC | 14.78 t (+1.95 t) | 270 l/min (+120) | 180 l/min (+60) |
| Komatsu PC130-8 | 12.8 t (-0.03 t) | 242 l/min (+92) | not published |
Figures as each maker publishes them. A difference is shown only where both machines have a published value.
136MRail: what the brochure names
Features Mecalac names in its own brochure for the 136MRail. Some of them may be optional, so check the machine's spec before you order.
- A rear or side view camera.
- An engine that meets EU Stage V.
- An offset boom.
- A load-sensing hydraulic system.
From Mecalac's published brochure. We keep the source document on file.
Questions about the 136MRail
- Which quick coupler is installed on your 136MRail?
- Mecalac lists this coupler for it: CONNECT HYDRAULIC QUICK COUPLER. Order attachments with the matching bracket.
- Can the 136MRail run a hydraulic attachment?
- Yes, if the tool's rated range covers the auxiliary circuit: 120 l/min at 300 bar.
Each family shows its candidate models by operating-weight range.
Digging & sorting buckets
- DB - heavy duty digging bucket
DB-160 · 5 width variants
- SDB - heavy duty skeleton DB bucket
SDB-160 · 2 width variants
- DBF - flat-top digging bucket for quick coupler
DBF-160 · 5 width variants
- RDBF - flat-top skeleton DBF bucket on rods
RDBF-160 · 2 width variants
Ditching, grading, sloping buckets
- GD - rigid grading & ditching bucket, 12–40 t
GD-160 · 3 width variants
- GDH - heavy duty hydraulic grading & ditching bucket
GDH-160 · 3 width variants
- SB - Dutch profile grading & ditching bucket
SB-160 · 4 width variants
- DCB - grading & ditching bucket with round profile
DCB-160 · 3 width variants
- PS - Scandinavian universal / grading bucket
PS-160 · 5 width variants
- PSH - hydraulic swivelling grading bucket
PS-160 · 5 width variants
Non-bucket attachments
- TH - hydraulic thumb for excavator
TH-16
- AC - excavator asphalt cutters
AC-18
- MR - heavy duty excavator multi-ripper
MR-17
- DuoRIP - double ripper for root extraction
Duo-Ripper-18
- GRB - excavator grading beam
GRB midi · 6 variants, GRB maxi · 6 variants
Other mini-ex attachments
- LRS - short land rakes for mini-excavators
LRS-15
- RIP mini - ripper shank for mini-excavator
Ripper-14
- MR mini - multi-ripper for mini-excavator
MRF 140 · 2 width variants
- QC-S - S-System Scandinavian quick-coupler
QC-S60, QC-U-S60
- CW - CW-System compatible quick-coupler
CW-20, CW-20 S, CW-U-20, CW-U-20 S
- QC-HS / QC-MS - MS-System compatible quick-coupler
QC-HS-10, QC-MS-10, QC-U-HS-10
- QC-PG - pin-grabber quick-coupler for factory brackets
QC-PG-60, QC-PG-65, QC-ML-M-55, QC-ML-M-60, QC-U-PG-60, QC-U-PG-65
Mecalac 136MRail: machine data
- Operating weight
- 12,830 kg
- Engine power
- 55.4 kW
- Quick coupler
- CONNECT HYDRAULIC QUICK COUPLER
- Auxiliary circuit flow
- 120 l/min
- Auxiliary circuit pressure
- 300 bar
As published by Mecalac, retrieved 2026-09-17. Source
Before you order: check the interface
The weight class of the Mecalac 136MRail sizes the attachment. It does not tell you the pin diameter, the pin spacing or the stick width, and those decide whether an attachment fits. Measure them on the machine, or send us the measurements of the bucket it runs today.
At this weight the choice is mostly about the material. A general purpose bucket suits soil and gravel, a reinforced bucket with thicker wear parts suits mixed ground and broken rock, and the quick coupler on the machine sets the bracket every attachment needs.
Quick coupler brackets at this weight
In our model tables, the attachments listed for the Mecalac 136MRail at its weight are built with these brackets. Each code opens the models that list it.
- Measure the diameter of both bucket pins.
- Measure the distance between the pin centres.
- Measure the inside width between the stick ears.
- If the machine runs a quick coupler, note its make and type.
What these terms mean:
How to choose an attachment for the job:
Other Mecalac models of a similar weight
Other makes of a similar weight
Operating weight within 2 t of the Mecalac 136MRail.
Other Mecalac models with the same coupler brackets
Our model tables give these machines the same quick coupler brackets.
Why buy from the factory
- Cutting, machining, welding and painting on one site, our own factory in Poland, EU
- More than 50,000 attachments delivered since 2008
- A record for every serial number, so the spare parts match your attachment
Need Custom Specifications?
We can manufacture attachments to your exact pin spacing and requirements for Mecalac 136MRail.
Welded to EN ISO 3834-2. Agree it as a standing term of supply and the EN 10204 3.1 certificate ships with every attachment. You also get the CE declaration of conformity for every product that carries the CE mark.
Do you sell Mecalac machines? Machine dealer supply
Machine makes and model names belong to their owners. Sieruta is not affiliated with them. We use the names only to show which machines we offer attachments for, by operating weight.