Attachments for the Mecalac e12 weight range
- Bucket line
- DB - heavy duty digging bucket400–1200 mm wide
- We usually reply within 1 working day
- We check the fit before we send the quote
- Every offer names the dispatch week
- If a bracket we made is wrong and does not fit your machine, we replace it.
Catalogue sizes for the e12
Each size below has a catalogue row rated for a carrier of 11,300 kg operating weight. Tell us which sizes you want and we reply with an offer.
On a narrow screen the table scrolls sideways.
Welded to EN ISO 3834-2. Agree it as a standing term of supply and the EN 10204 3.1 certificate ships with every attachment. You also get the CE declaration of conformity for every product that carries the CE mark.
Message us on WhatsAppPhotos and voice notes are welcome.For publishers: cite or embed this table
Cite this table as https://sieruta.com/en/fit/mecalac/mecalac-e12, figures as of 2026-09-11.
Embed this table on your site
Copy the HTML below into your page. It keeps the link back to this page and the date of the figures.
Sizes are matched to the published operating weight of the e12.
- Weight Class
- Midi Excavator (6–12 t)
- Operating Weight
- 11,300 kg
- Family-owned group, founded in 1996
- More than 50,000 attachments delivered
- Built in our own factory in Poland
Operating weight as published by Mecalac, retrieved 2026-09-11. Source
Start here
The attachments buyers in your market ask for first, sized for the e12.
Which coupler is on your machine?
Pick the system on your machine and we put it in your enquiry. We check the bracket before we send the quote.
How to measure your coupler
Not sure which system it is? Three measurements tell us which bracket you need.
- Measure the diameter of both pins.
- Measure the distance between the pin centres.
- Measure the width between the inside faces of the ears.
If the coupler has a make or type printed on it, send that too.
Send me the spec sheet for my machine
Pick a bucket line and we email you its spec sheet, with the sizes we build for the e12.
Send this answer to a colleague or dealer
Mecalac e12: DBF - flat-top digging bucket for quick coupler (DBF-120)
e12 at a glance
| Figure | Value | Source |
|---|---|---|
| Max dig depth | 4,100 mm | maker's document (mecalac.com) |
| Max reach | 7,125 mm | maker's document (mecalac.com) |
| Max dump height | 4,077 mm | maker's document (mecalac.com) |
| Arm length | 2,210 mm | maker's document (mecalac.com) |
| Main pump flow | 144 l/min | maker's document (mecalac.com) |
| Auxiliary flow | 120 l/min | maker's document (mecalac.com) |
| Auxiliary pressure | 310 bar | maker's document (mecalac.com) |
| Bucket capacity | 0.15–0.63 m³ | maker's document (mecalac.com) |
| Bucket width | 350–1,200 mm | maker's document (mecalac.com) |
| Quick coupler | CONNECT coupling system | maker's document (mecalac.com) |
| Transport width | 2,383 mm | maker's document (mecalac.com) |
Only figures the maker publishes for this model. Where a figure is missing, no value is shown.
What the e12 figures mean for its attachments
- Its auxiliary circuit is rated at 120 l/min and 310 bar. A breaker, auger, tilt rotator or other hydraulic tool states the oil flow it needs, so choose one whose range includes this figure.
- The main pump delivers up to 144 l/min at 310 bar. That is the pump output of the whole machine, not the flow an attachment gets.
- Mecalac lists this quick coupler for it: CONNECT coupling system. The bracket on every attachment has to match the coupler.
- It digs down to 4,100 mm. That is the deepest trench it can open.
- Its maximum reach is 7,125 mm.
- It dumps at up to 4,077 mm, so a truck or skip side has to sit below that height.
- Its arm is 2,210 mm long.
- Mecalac lists buckets from 350 to 1,200 mm wide for this machine. Compare that with the bucket widths in the table above.Our sizes in that range: DB - heavy duty digging bucket (DB-120); SDB - heavy duty skeleton DB bucket (SDB-120); DBF - flat-top digging bucket for quick coupler (DBF-120); RDBF - flat-top skeleton DBF bucket on rods (RDBF-120); CB - heavy duty hydraulic clamp bucket (CBR-120)
- Mecalac lists bucket capacities from 0.15 to 0.63 m³.
- Its tail swing radius is 1,385 mm, which matters beside a wall or in a live traffic lane.
- For transport it measures 4,619 x 2,383 x 3,464 mm (length, width, height).
Figures as published by Mecalac in its own documents.
How the e12 compares with its neighbours
The nearest models by weight, with the difference to the e12 in parentheses where both makers publish the figure.
| Model | Operating weight | Max dig depth | Main pump flow | Auxiliary flow |
|---|---|---|---|---|
| e12 | 11.3 t | 4,100 mm | 144 l/min | 120 l/min |
| Mecalac 12MRX | 10.4 t (-0.9 t) | 4,100 mm | 157 l/min (+13) | 157 l/min (+37) |
| Mecalac 11MWR | 10 t (-1.3 t) | 3,800 mm (-300) | 165 l/min (+21) | 120 l/min |
| CASE CX120E LR | 11.4 t (+0.1 t) | 7,730 mm (+3,630) | 192 l/min (+48) | 100 l/min (-20) |
Figures as each maker publishes them. A difference is shown only where both machines have a published value.
e12: build years and variants
Build years: 2023–2026
Variants
- e12 (2023–2026)
Years and variants as listed in the LECTURA Specs database.
e12: what the brochure names
Features Mecalac names in its own brochure for the e12. Some of them may be optional, so check the machine's spec before you order.
- Operator protection certified to ROPS and FOPS.
- Telematics for tracking the machine remotely.
- Use with a tiltrotator.
- A rear or side view camera.
From Mecalac's published brochure. We keep the source document on file.
Questions about the e12
- What bucket width fits the e12?
- Mecalac lists buckets from 350 to 1,200 mm wide for it. Pick a width in that range from the sizes above.
- Which quick coupler is installed on your e12?
- Mecalac lists this coupler for it: CONNECT coupling system. Order attachments with the matching bracket.
- Can the e12 run a hydraulic attachment?
- Yes, if the tool's rated range covers the auxiliary circuit: 120 l/min at 310 bar.
Each family shows its candidate models by operating-weight range.
Digging & sorting buckets
- DB - heavy duty digging bucket
DB-120 · 6 width variants
- SDB - heavy duty skeleton DB bucket
SDB-120 · 2 width variants
- DBF - flat-top digging bucket for quick coupler
DBF-120 · 6 width variants
- RDBF - flat-top skeleton DBF bucket on rods
RDBF-120 · 2 width variants
Ditching, grading, sloping buckets
- GDH - heavy duty hydraulic grading & ditching bucket
GDH-120 · 4 width variants
- DCB - grading & ditching bucket with round profile
DCB-120 · 4 width variants
Nordic mini-ex buckets set No. 4
- PS mini - Scandinavian universal grading bucket for mini-excavator
PS-120 · 5 width variants
- PSH mini - hydraulic swivelling grading bucket for mini-excavators
PS-120 · 5 width variants
Non-bucket attachments
- TH - hydraulic thumb for excavator
TH-16
- MR - heavy duty excavator multi-ripper
MR-17
- DuoRIP - double ripper for root extraction
Duo-Ripper-12
- GRB - excavator grading beam
GRB midi · 6 variants, GRB maxi · 6 variants
- QC-S - S-System Scandinavian quick-coupler
QC-S45-H, QC-S50, QC-S45-SA, QC-U-S45-H, QC-U-S50
- CW - CW-System compatible quick-coupler
CW-20, CW-20 S, CW-U-20, CW-U-20 S
- QC-HS / QC-MS - MS-System compatible quick-coupler
QC-HS-08, QC-HS-10, QC-MS-08, QC-MS-10, QC-U-HS-08, QC-U-HS-10
- QC-PG - pin-grabber quick-coupler for factory brackets
QC-PG-60, QC-PG-65, QC-ML-M-55, QC-ML-M-60, QC-U-PG-60, QC-U-PG-65
Bucket sets for this machine
Sets of one bucket profile that include buckets listed for the Mecalac e12. Each set lists the buckets that match the machine's operating weight.
- Nordic-profile set
Buckets in the set for this weight: PS, PSH
Mecalac e12: machine data
- Operating weight
- 11,300 kg
- Maximum digging depth
- 4,100 mm
- Maximum dump height
- 4,077 mm
- Tail swing radius
- 1,385 mm
- Quick coupler
- CONNECT coupling system
- Auxiliary circuit flow
- 120 l/min
- Auxiliary circuit pressure
- 310 bar
As published by Mecalac, retrieved 2026-09-19. Source
Before you order: check the interface
The weight class of the Mecalac e12 sizes the attachment. It does not tell you the pin diameter, the pin spacing or the stick width, and those decide whether an attachment fits. Measure them on the machine, or send us the measurements of the bucket it runs today.
A midi excavator is often the main machine on a site, trenching, loading and grading in the same day. Buyers usually start with a general purpose bucket, a grading bucket and a quick coupler, then add other tools when the work calls for them.
Quick coupler brackets at this weight
In our model tables, the attachments listed for the Mecalac e12 at its weight are built with these brackets. Each code opens the models that list it.
- Measure the diameter of both bucket pins.
- Measure the distance between the pin centres.
- Measure the inside width between the stick ears.
- If the machine runs a quick coupler, note its make and type.
What these terms mean:
How to choose an attachment for the job:
Other Mecalac models of a similar weight
Other makes of a similar weight
Operating weight within 2 t of the Mecalac e12.
Other Mecalac models with the same coupler brackets
Our model tables give these machines the same quick coupler brackets.
Why buy from the factory
- Cutting, machining, welding and painting on one site, our own factory in Poland, EU
- More than 50,000 attachments delivered since 2008
- A record for every serial number, so the spare parts match your attachment
Need Custom Specifications?
We can manufacture attachments to your exact pin spacing and requirements for Mecalac e12.
Welded to EN ISO 3834-2. Agree it as a standing term of supply and the EN 10204 3.1 certificate ships with every attachment. You also get the CE declaration of conformity for every product that carries the CE mark.
Do you sell Mecalac machines? Machine dealer supply
Machine makes and model names belong to their owners. Sieruta is not affiliated with them. We use the names only to show which machines we offer attachments for, by operating weight.