Buckets · Grading and ditching buckets
PS - Scandinavian universal / grading bucket
- For machines of 12–30 t
- Widths 1,600–2,200 mm
- Couplers: S · MS · OQ · M · SW
- We usually reply within 1 working day
- We check the fit before we send the quote
- 12 months warranty on manufacturing defects
- Every offer names the dispatch week
- If a bracket we made is wrong and does not fit your machine, we replace it.
Call +48 503 808 636Message us on WhatsAppPhotos and voice notes are welcome.
Standard
Known in Sweden as Planeringsskopa · in Denmark as Planerskovl · in Finland as Luiskakauha
The whole range: Excavator buckets
Compatible interfaces: S · MS · OQ · M · SW
- 12–30 tons
- Carriers: Large
PS is a universal grading bucket with a Scandinavian profile for excavators from 12 to 30 t. It is used for grading and levelling, backfilling and finishing work, on road building sites and in landscaping.
About this family
The PS universal grading bucket in the Nordic profile, for grading and levelling work.
Four sizes, PS-160 to PS-300, come in widths from 1600 to 2200 mm, with a capacity of 744 to 1830 litres (SAE) and a weight of 424 to 1043 kg. The tip radius grows from 845 mm on the PS-160 to 1082 mm on the PS-300. Options: a welded back cutting edge, horizontal wear bars and a reversible bolt-on cutting edge. The reversible edge can be turned round when one side is worn, so the bucket gets a second cutting edge before a new one has to be fitted. Depending on the size, the listed couplers are S60 and S70, MS10 and MS21, OQ60 to OQ70, M18 and M26, S1 and S2, SW33 and SW48. Tell us the machine and we confirm the bucket size.
Features
- Made for grading.
- Steel build
- Back welded Cutting Edge - optional
- Horizontal wear bars - optional
- Reversible Bolt-on Cutting Edge - optional
- Tiltrotator compatible
Dimensions
Dimensions in mm
Typical jobs
The PS universal Nordic grading bucket is used for:
- Fine grading and levelling
- Road construction and maintenance applications
- Landscaping work that needs clean lines
- General grading work with a guided cut
- Other grading and finishing work
Which coupler is on your machine?
Pick the system on your machine and we put it in your enquiry. We check the bracket before we send the quote.
How to measure your coupler
Not sure which system it is? Three measurements tell us which bracket you need.
- Measure the diameter of both pins.
- Measure the distance between the pin centres.
- Measure the width between the inside faces of the ears.
If the coupler has a make or type printed on it, send that too.
- Loading machines…
Models and specifications
Figures as printed on this family’s datasheet. A dash means the datasheet does not state that figure.
Datasheet (PDF)- Which bracket does your machine take? See the coupler fit reference
- Looking for your machine by make and model? See the machine fit tables
Column heads: model and Machine class [t] · each cell: Capacity SAE [dm³] / Weight [kg]
| Width [mm] | PS-16012–16 | PS-19016–19 | PS-23019–23 | PS-30023–30 |
|---|---|---|---|---|
| 1600 | 744 / 424 | – | – | – |
| 1800 | 872 / 476 | 937 / 560 | 1179 / 679 | 1389 / 863 |
| 2000 | 1000 / 528 | 1083 / 624 | 1374 / 753 | 1609 / 953 |
| 2100 | 1064 / 554 | 1155 / 656 | 1472 / 791 | 1720 / 998 |
| 2200 | 1128 / – | 1228 / 690 | 1570 / 834 | 1830 / 1043 |
| Get a price | Get a price | Get a price | Get a price | |
| Height [mm] | 705 | 744 | 853 | 967 |
| Length [mm] | 1195 | 1289 | 1489 | 1502 |
| Tip radius [mm] | 845 | 914 | 1046 | 1082 |
| Quick coupler brackets | S60 · MS10 · OQ65 · M18 · S1 · SW33 | S60 · MS10 · OQ60 · OQ65 · M26 · S1 · SW33 | S70 · MS21 · OQ65 · OQ70 · M26 · S2 · SW33 · SW48 | S70 · MS21 · OQ70 · OQ70-55 · S2 · SW48 |
→ Scroll the table sideways to see every model.
Compliance, certification & documentation
- EN ISO 3834-2Certified welding qualityCSW/1293/2025
- EN 1090-1 EXC1 + EXC2Factory production control1433-CPR-0257
- EN ISO 9606-1 · WPQR EN ISO 15614Qualified welders and procedures
- EN ISO 9712: VT + PT level 2Non-destructive testingwhere the drawing or inspection plan requires it
- EN 10204 3.1Material traceability
- CE: 2006/42/ECCE markingTransition to Regulation (EU) 2023/1230 underway. Applicable from 20 January 2027.
Warranty
12 months warranty on manufacturing defects in the components Sieruta makes itself.
Normal wear, misuse or overloading and unauthorised modifications are not covered. Warranty terms and claims
Why buy from the factory
- Cutting, machining, welding and painting on one site, our own factory in Poland, EU
- More than 50,000 attachments delivered since 2008
- A record for every serial number, so the spare parts match your attachment
Request a quote
Tell us your machine and the job. An engineer checks the fit, and we usually reply within 1 working day.
More from this family group
Standard
PSH - Hydraulic swivelling grading bucket
A cylinder swivels the PS bucket, so you set the angle of the cutting edge from the cab. It grades slopes and verges while the machine stays where it is.
Fits your machine
Standard
DBF - Flat-top digging bucket for quick coupler
The flat top suits excavators that change attachments on a quick coupler. It comes in Economy, Standard, Heavy Duty and Rock versions.
Fits your machine
Standard
GD - Rigid grading & ditching bucket, 12–40 t
The rigid body has no tilt joint, so there are no hoses or cylinders to connect. It is used to grade surfaces and clean ditches.
Fits your machine
Standard
GDH - Heavy duty hydraulic grading & ditching bucket
The hydraulic tilt grading bucket shapes slopes and levels uneven ground.
Fits your machine
StandardEarthmoving / heavy duty
DB - Heavy duty digging bucket
A digging bucket for most materials, with a rock version for harder ground.
Fits your machine
Standard
SDB - Heavy duty skeleton DB bucket
The SDB separates material as you dig: soil falls through the ribs while stone, rubble and roots stay in the bucket.
Fits your machine
