Buckets · Digging buckets
DSX - Nordic heavy duty digging bucket
- For machines of 14–40 t
- Widths 800–1,400 mm
- Couplers: S · MS · OQ
- We usually reply within 1 working day
- We check the fit before we send the quote
- 12 months warranty on manufacturing defects
- Every offer names the dispatch week
- If a bracket we made is wrong and does not fit your machine, we replace it.
Call +48 503 808 636Message us on WhatsAppPhotos and voice notes are welcome.
Standard
Known in Sweden as Djupskopa · in Denmark as Graveskovl · in Finland as Kuokkakauha
The whole range: Excavator buckets
Compatible interfaces: S · MS · OQ
- 14–40 tons
- Carriers: Large, Heavy
The DSX is a heavy duty digging bucket in the Nordic profile for excavators from 14 to 40 t. The body is Hardox® 450 steel, so it resists wear in rocky ground, abrasive material, demolition and quarry work.
Which bucket for the job
| Bucket | Application | Machine class | Build | Teeth | Typical material |
|---|---|---|---|---|---|
| DB | Digging bucket, direct fit or SW and CW brackets | 10–50 tons | Economy, Standard or Heavy Duty, rock version available | CAT J, BYG Futura or ESCO UltraLok | Soil, rubble and bulk material, rock version for quarrying |
| DBF | Flat top digging bucket for quick couplers | 10–50 tons | Economy, Standard or Heavy Duty, rock version available | CAT J, BYG Futura or ESCO UltraLok | Soil and bulk material, rock version for quarrying |
| DSX | Nordic profile heavy-duty digging bucket | 14–40 tons | Body in Hardox® 450 steel | CAT J, BYG Futura or ESCO UltraLok | Rocky ground and abrasive material |
| DBS | Rock bucket designed for one machine | Designed for your machine | Wear protection chosen for the rock | Teeth, adapters and side cutters chosen for the rock | Rock |
→ Scroll the table sideways to see every column.
The teeth and adapters are the tooth-system maker's own parts.
DSX is for
- Digging in rocky ground and abrasive material
- Demolition, quarry and mine work
- A Nordic profile bucket with its body in Hardox® steel
Choose DB instead if
- You dig soil, trenches or foundations, or load bulk material
Choose DBF instead if
- Your excavator changes attachments on a quick coupler and a flat-top bucket suits it
Choose DBS instead if
- You dig rock and want the bucket designed for your machine and that rock
Questions about DSX
- Which excavators does DSX fit?
- The DSX fits excavators of 14–40 tons.
- Which teeth and build does DSX come with?
- The DSX takes CAT J, BYG Futura or ESCO UltraLok teeth. Its body is made of Hardox® 450 steel.
- What is DSX used for?
- The DSX digs rocky ground and abrasive material. It is used in demolition, quarries and mines.
About this family
DSX Nordic heavy duty digging bucket, made of Hardox® 450.
The Nordic Heavy Duty Digging Bucket is built from Hardox® 450 steel for heavy digging in hard conditions. The steel is highly wear resistant.
Four sizes, DS-HD-190 to DS-HD-400, come in widths from 800 to 1400 mm with 4 to 6 teeth. Capacity runs from 570 to 1462 l (SAE) and weight from 505 to 1214 kg. Tip radius is 1125 mm on the DS-HD-190 and 1306 mm on the DS-HD-400.
Teeth are CAT J, BYG Futura or ESCO UltraLok, J350 or J400. Brackets per size run from S60 to S80, MS10 to MS25, OQ65 to OQ80 and S1 to S3. As an option the bucket can be built to the requirements of the Hardox® In My Body certification.
Features
- Hardox® 450 steel
- Nordic profile for heavy digging
- Four sizes: DS-HD-190 to DS-HD-400, 800 to 1400 mm wide
- For excavators from 14 to 40 t
- Available teeth systems: CAT J series, BYG Futura, ESCO UltraLok
- Hardox® in My Body Certification (option): This bucket is designed and can be manufactured to meet the stringent requirements of the Hardox® In My Body certification program. A certified bucket is made of genuine Hardox® steel.
Dimensions
Dimensions in mm
Typical jobs
The Nordic Heavy Duty Digging Bucket is used for:
- Extreme digging conditions (rocky terrain, abrasive materials)
- Demolition and heavy-duty excavation projects
- Long working hours with little time for maintenance
- Quarries and mines where the bucket has to last a long time
- Excavators from 14 to 40 t working in rock or abrasive material
Contact us and we will show you what Hardox® brings to your work.
Which coupler is on your machine?
Pick the system on your machine and we put it in your enquiry. We check the bracket before we send the quote.
How to measure your coupler
Not sure which system it is? Three measurements tell us which bracket you need.
- Measure the diameter of both pins.
- Measure the distance between the pin centres.
- Measure the width between the inside faces of the ears.
If the coupler has a make or type printed on it, send that too.
- Loading machines…
Models and specifications
Figures as printed on this family’s datasheet. A dash means the datasheet does not state that figure.
Datasheet (PDF)- Which bracket does your machine take? See the coupler fit reference
- Looking for your machine by make and model? See the machine fit tables
Column heads: model and Machine class [t] · each cell: Capacity SAE [dm³] / Weight [kg]
| Width [mm] | DS-HD-19014–19 | DS-HD-25019–25 | DS-HD-30025–30 | DS-HD-40030–40 |
|---|---|---|---|---|
| 800 | 570 / 505 | 615 / 642 | 678 / 755 | – |
| 1000 | 771 / 592 | 837 / 745 | 922 / 879 | 921 / 952 |
| 1200 | 982 / 679 | 1070 / 847 | 1178 / 1002 | 1187 / 1083 |
| 1400 | – | – | – | 1462 / 1214 |
| Get a price | Get a price | Get a price | Get a price | |
| Height [mm] | 1040 | 1103 | 1177 | 1208 |
| Length [mm] | 1450 | 1537 | 1645 | 1688 |
| Tip radius [mm] | 1125 | 1194 | 1274 | 1306 |
| Tooth systems | J350, V29, U30 | J350, V33, U35 | J400, V39, U40 | J400, V39, U40 |
| Quick coupler brackets | S60 · MS10 · OQ65 · S1 | S70 · MS21 · OQ70 · S2 | S70 · MS21 · OQ70 · OQ70-55 · S2 | S80 · MS25 · OQ80 · S3 |
→ Scroll the table sideways to see every model.
Compliance, certification & documentation
- EN ISO 3834-2Certified welding qualityCSW/1293/2025
- EN 1090-1 EXC1 + EXC2Factory production control1433-CPR-0257
- EN ISO 9606-1 · WPQR EN ISO 15614Qualified welders and procedures
- EN ISO 9712: VT + PT level 2Non-destructive testingwhere the drawing or inspection plan requires it
- EN 10204 3.1Material traceability
- CE: 2006/42/ECCE markingTransition to Regulation (EU) 2023/1230 underway. Applicable from 20 January 2027.
- Materials
- Standard: Body: Hardox® 450
Warranty
12 months warranty on manufacturing defects in the components Sieruta makes itself.
Normal wear, misuse or overloading and unauthorised modifications are not covered. Warranty terms and claims
Why buy from the factory
- Cutting, machining, welding and painting on one site, our own factory in Poland, EU
- More than 50,000 attachments delivered since 2008
- A record for every serial number, so the spare parts match your attachment
Request a quote
Tell us your machine and the job. An engineer checks the fit, and we usually reply within 1 working day.
More from this family group
Standard
DBF - Flat-top digging bucket for quick coupler
The flat top suits excavators that change attachments on a quick coupler. It comes in Economy, Standard, Heavy Duty and Rock versions.
Fits your machine
Standard
GD - Rigid grading & ditching bucket, 12–40 t
The rigid body has no tilt joint, so there are no hoses or cylinders to connect. It is used to grade surfaces and clean ditches.
Fits your machine
Standard
GDH - Heavy duty hydraulic grading & ditching bucket
The hydraulic tilt grading bucket shapes slopes and levels uneven ground.
Fits your machine
StandardEarthmoving / heavy duty
DB - Heavy duty digging bucket
A digging bucket for most materials, with a rock version for harder ground.
Fits your machine
Standard
SDB - Heavy duty skeleton DB bucket
The SDB separates material as you dig: soil falls through the ribs while stone, rubble and roots stay in the bucket.
Fits your machine
Standard
RDBF - Flat-top skeleton DBF bucket on rods
Interlocking steel rods replace the solid bottom, C45 as standard and Hardox® as an option. Soil sifts out from the rocks while you dig trenches, drains and pipe bedding.
Fits your machine
