Buckets · Mini excavator - grading
SB mini - Dutch profile grading & ditching bucket for mini-excavator
Standard
Known in the Netherlands as slotenbak
Compatible interfaces: CW00 · CW05 · CW10
- 0.6–10 tons
- On request
- Carriers: Mini, Midi
Part of the Dutch-profile set with BDP mini - clay digging bucket for mini-excavator, PDP mini - skeleton BDP stone bucket. Enquire about this set
The SB mini is a ditching and grading bucket with a Dutch profile, for mini and midi excavators. It is used for grading, cleaning ditches and cutting slopes.
About this family
The SB Dutch Profile Grading/Ditching Bucket is made for grading, ditch maintenance and cutting slopes. It has the open Dutch profile.
Seven sizes, SB-10 through SB-90, cover machines from 0.6 to 10 t in widths from 600 to 1800 mm. Capacity runs from 35 to 614 litres (SAE) and weight from 27 to 291 kg. The bracket listed is CW00 on SB-10, CW05 on SB-20 to SB-40 and CW10 on SB-60 to SB-90. As standard it has an HB500 cutting edge and drainage holes, so water runs out of the load. Options are an HB400 reversible cutting edge, an HB500 rear cutting edge, HB500 wear bars, a cylinder guard or spill guard, an additional reinforcement bevel and HB500 cutting edges on the front sides.
Features
- Profile for Dutch conditions
- Drainage holes
- HB500 cutting edge
Optional features:
- HB400 reversible cutting edge
- HB500 rear cutting edge
- HB500 wear bars
- Cylinder guard / spill guard
- Additional reinforcement bevel
Dimensions
Dimensions in mm
Models and specifications
Figures as printed on this family’s datasheet. A dash means the datasheet does not state that figure.
Datasheet (PDF)Column heads: model and Machine class [t] · each cell: Capacity SAE [dm³] / Weight [kg]
| Width [mm] | SB-100.6–1.2 | SB-201.2–1.8 | SB-301.8–2.5 | SB-402.5–4.0 | SB-604.0–6.0 | SB-756.0–7.5 | SB-907.5–10 |
|---|---|---|---|---|---|---|---|
| 600 | 35 / 27 | – | – | – | – | – | – |
| 700 | 41 / 31 | – | – | – | – | – | – |
| 800 | 47 / 35 | 77 / 43 | – | – | – | – | – |
| 900 | – | 89 / 48 | 97 / 65 | – | – | – | – |
| 1000 | – | 99 / 53 | 107 / 72 | 149 / 93 | 192 / 105 | – | – |
| 1100 | – | – | 119 / 78 | 166 / 101 | 215 / 115 | – | – |
| 1200 | – | – | 131 / 85 | 184 / 109 | 238 / 124 | 283 / 164 | – |
| 1300 | – | – | – | – | 261 / 134 | 311 / 177 | – |
| 1400 | – | – | – | – | 284 / 143 | 341 / 189 | 460 / 231 |
| 1500 | – | – | – | – | – | 368 / 202 | 498 / 246 |
| 1600 | – | – | – | – | – | 396 / 214 | 537 / 261 |
| 1700 | – | – | – | – | – | – | 575 / 276 |
| 1800 | – | – | – | – | – | – | 614 / 291 |
| Height [mm] | 280 | 350 | 393 | 445 | 505 | 560 | 648 |
| Length [mm] | 337 | 420 | 472 | 534 | 604 | 666 | 776 |
| Tip radius [mm] | 328 | 410 | 454 | 520 | 600 | 665 | 768 |
| Quick coupler brackets | CW00 | CW05 | CW05 | CW05 | CW10 | CW10 | CW10 |
→ Scroll the table sideways to see every model.
Compliance, certification & documentation
- EN ISO 3834-2Certified welding qualityCSW/1293/2025
- EN 1090-1 EXC1 + EXC2Factory production control1433-CPR-0257
- EN ISO 9606-1 · WPQR EN ISO 15614Qualified welders and procedures
- EN ISO 9712: VT + PT level 2Non-destructive testingwhere the drawing or inspection plan requires it
- EN 10204 3.1Material traceability
- CE: 2006/42/ECCE markingTransition to Regulation (EU) 2023/1230 underway. Applicable from 20 January 2027.
- Materials
- Standard: Cutting edge: HB500
- Options: Reversible cutting edge: HB400; Rear cutting edge: HB500; Wear bars: HB500; Cutting edges on the front sides: HB500
Warranty
Sieruta covers manufacturing defects in the components it makes itself.
Normal wear, misuse or overloading and unauthorised modifications are not covered. Warranty terms and claims
Request a quote
Tell us your machine and the job. An engineer checks the fit, and we usually reply within 24–48 hours.
More from this family group
Standard
GB - rigid grading & ditching bucket
Rigid grading & ditching bucket with a flat top. It is used for ditch cleaning, grading and slope work.
On requestView product
Standard
GBH - hydraulic tilt ditching bucket for mini-excavator
Tilts up to 45 degrees to each side, and double pilot check valves hold the angle. Slopes, ditches and banks are shaped without moving the machine.
On requestView product
Standard
GBP - rigid grading & ditching bucket
A rigid grading and ditching bucket with a round inner profile and an HB500 cutting edge. It cleans ditches, grades and cuts slopes on mini and midi excavators.
On requestView product
Standard
GBPH - hydraulic tilting grading & ditching bucket
Tilts 45 degrees to each side, and a double pilot check valve holds the angle. Ditches, slopes and banks are cleaned and shaped without moving the mini-excavator.
On requestView product
Standard
PS mini - Scandinavian universal grading bucket for mini-excavator
The PS Scandinavian Grading Bucket is made for mini-excavators and for work on a tiltrotator. It is used for fine grading and finishing work. (Planeringsskopa / Planerskovl / Luiskakauha)
On requestView product
Standard
PSH mini - hydraulic swivelling grading bucket for mini-excavators
A cylinder swivels the PS mini bucket, so you set the angle of the cutting edge from the cab. It finishes slopes and verges in tight places while the machine stays where it is. (Planeringsskopa / Planerskovl / Luiskakauha)
On requestView product
