Attachments for the Volvo EC950F weight range
Weight Class: Above our standard range: ask us Operating Weight: 91,275 – 94,810 kg
Ask our engineers- We usually reply within 1 working day
- We check the fit before we send the quote
- Every offer names the dispatch week
- If a bracket we made is wrong and does not fit your machine, we replace it.
How is the attachment mounted on this machine?
Tell us what is on the machine now. It narrows the sizes we show and goes with your enquiry. It does not confirm fit: we check the bracket before we send the quote.
These machines weigh more than 80 t, the limit of what we build to order. Send us the machine details and we tell you what we can build.
Before you order: check the interface
The weight class of the Volvo EC950F sizes the attachment. It does not tell you the pin diameter, the pin spacing or the stick width, and those decide whether an attachment fits. Measure them on the machine, or send us the measurements of the bucket it runs today.
Heavy excavators dig rock, load trucks and work in quarries, so wear decides the bucket as much as capacity does. Rock and reinforced buckets carry thicker wear steel, teeth and side cutters, and the bucket is sized to the trucks it loads and to the density of the material.
- Measure the diameter of both bucket pins.
- Measure the distance between the pin centres.
- Measure the inside width between the stick ears.
- If the machine runs a quick coupler, note its make and type.
What these terms mean:
Sizes are matched to the published operating weight of the EC950F.
- Weight Class
- Above our standard range: ask us
- Operating Weight
- 91,275 – 94,810 kg
- Family-owned group, founded in 1996
- More than 50,000 attachments delivered
- Built in our own factory in Poland
Operating weight as published by Volvo, retrieved 2026-09-10. Source
Volvo EC950F: machine data
- Operating weight
- 91,275 – 94,810 kg
- Maximum digging depth
- 7,120 mm
- Maximum dump height
- 9,200 mm
- Bucket breakout force
- 424 kN
- Tail swing radius
- 4,700 mm
- Max reach
- 13,750 mm maker's document (volvoce.com)
- Arm length
- 2,950–3,700 mm maker's document (volvoce.com)
- Bucket capacity
- 3.9–7.7 m³ maker's document (volvoce.com)
- Bucket width
- 1,970–2,650 mm maker's document (volvoce.com)
- Lift capacity
- 36,060 kg maker's document (volvoce.com)
- Transport width
- 4,515 mm maker's document (volvoce.com)
As published by Volvo, retrieved 2026-09-17. Source
What the EC950F figures mean for its attachments
- The main pump works at 343 bar.
- It digs down to 7,120 mm. That is the deepest trench it can open.
- Its maximum reach is 13,750 mm.
- It dumps at up to 9,200 mm, so a truck or skip side has to sit below that height.
- Volvo offers arms from 2,950 to 3,700 mm. A longer arm reaches further, a shorter one handles a heavier bucket.
- Volvo lists buckets from 1,970 to 2,650 mm wide for this machine.
- Volvo lists bucket capacities from 3.9 to 7.7 m³.
- Bucket breakout force is 424 kN. That is the force a bucket or ripper works with at the tooth.
- Volvo gives a lifting capacity of 36,060 kg. Check a heavy grab or hammer, plus its load, against the full load chart.
- Its tail swing radius is 4,700 mm, which matters beside a wall or in a live traffic lane.
- For transport it measures 13,615 x 4,515 x 4,950 mm (length, width, height).
Figures as published by Volvo in its own documents.
How the EC950F compares with its neighbours
The nearest models by weight, with the difference to the EC950F in parentheses where both makers publish the figure.
| Model | Operating weight | Max dig depth |
|---|---|---|
| EC950F | 91.275 t | 7,120 mm |
| Volvo EC750E | 73.5 t (-17.775 t) | 7,210 mm (+90) |
| Volvo EC480E HR | 63.52 t (-27.755 t) | 8,280 mm (+1,160) |
| Liebherr R 992 E | 90.55 t (-0.725 t) | 13,380 mm (+6,260) |
Figures as each maker publishes them. A difference is shown only where both machines have a published value.
EC950F: what the brochure names
Features Volvo names in its own brochure for the EC950F. Some of them may be optional, so check the machine's spec before you order.
- Work modes you select from the cab.
- Operator protection certified to ROPS and FOPS.
- Telematics for tracking the machine remotely (CareTrack).
- An engine that meets EU Stage V.
From Volvo's published brochure. We keep the source document on file.
Other Volvo models of a similar weight
Other makes of a similar weight
Operating weight within 2 t of the Volvo EC950F.
Why buy from the factory
- Cutting, machining, welding and painting on one site, our own factory in Poland, EU
- More than 50,000 attachments delivered since 2008
- A record for every serial number, so the spare parts match your attachment
Above the 80 t limit
The Volvo EC950F is above the 80 t class we build for. Send us its details and our engineers tell you whether a build is feasible.
Welded to EN ISO 3834-2. Agree it as a standing term of supply and the EN 10204 3.1 certificate ships with every attachment. You also get the CE declaration of conformity for every quick coupler and hydraulic attachment. See the certificates.
Questions about the EC950F
- What bucket width fits the EC950F?
- Volvo lists buckets from 1,970 to 2,650 mm wide for it. Pick a width in that range.
Do you sell Volvo machines? Machine dealer supply
Machine makes and model names belong to their owners. Sieruta is not affiliated with them. We use the names only to show which machines we offer attachments for, by operating weight.