Attachments for the Volvo EC480E HR weight range
Price & dispatch week- We usually reply within 1 working day
- We check the fit before we send the quote
- Every offer names the dispatch week
- If a bracket we made is wrong and does not fit your machine, we replace it.
Catalogue sizes for the EC480E HR
Each size below has a catalogue row rated for a carrier of 63,520 kg operating weight. Tell us which sizes you want and we reply with an offer.
On a narrow screen the table scrolls sideways.
| Attachment | Sizes | Capacity [dm³] | Width [mm] | Weight [kg] |
|---|---|---|---|---|
| RIP - heavy duty ripper | Ripper-H | 684 | ||
| QC-S - S-System Scandinavian quick-coupler | QC-S90 | 750 |
Welded to EN ISO 3834-2. Agree it as a standing term of supply and the EN 10204 3.1 certificate ships with every attachment. You also get the CE declaration of conformity for every product that carries the CE mark.
Message us on WhatsAppPhotos and voice notes are welcome.For publishers: cite or embed this table
Cite this table as https://sieruta.com/en/fit/volvo/volvo-ec480e-hr, figures as of 2026-09-10.
Embed this table on your site
Copy the HTML below into your page. It keeps the link back to this page and the date of the figures.
Sizes are matched to the published operating weight of the EC480E HR.
- Weight Class
- Heavy Excavator (30–65 t)
- Operating Weight
- 63,520 kg
- Family-owned group, founded in 1996
- More than 50,000 attachments delivered
- Built in our own factory in Poland
Operating weight as published by Volvo, retrieved 2026-09-10. Source
Which coupler is on your machine?
Pick the system on your machine and we put it in your enquiry. We check the bracket before we send the quote.
How to measure your coupler
Not sure which system it is? Three measurements tell us which bracket you need.
- Measure the diameter of both pins.
- Measure the distance between the pin centres.
- Measure the width between the inside faces of the ears.
If the coupler has a make or type printed on it, send that too.
EC480E HR at a glance
| Figure | Value | Source |
|---|---|---|
| Max dig depth | 8,280 mm | maker's document (volvoce.com) |
| Max reach | 13,115 mm | maker's document (volvoce.com) |
| Max dump height | 10,410 mm | maker's document (volvoce.com) |
| Arm length | 3,350–3,900 mm | maker's document (volvoce.com) |
| Main pump flow | 752 l/min | maker's document (volvoce.com) |
| Lift capacity | 8,450 kg | maker's document (volvoce.com) |
| Quick coupler | Volvo hydraulic quick fit | maker's document (volvoce.com) |
| Transport width | 3,415 mm | maker's document (volvoce.com) |
Only figures the maker publishes for this model. Where a figure is missing, no value is shown.
What the EC480E HR figures mean for its attachments
- The main pump delivers up to 752 l/min at 324 bar. That is the pump output of the whole machine, not the flow an attachment gets.
- Volvo lists this quick coupler for it: Volvo hydraulic quick fit. The bracket on every attachment has to match the coupler.
- It digs down to 8,280 mm. That is the deepest trench it can open.
- Its maximum reach is 13,115 mm.
- It dumps at up to 10,410 mm, so a truck or skip side has to sit below that height.
- Volvo offers arms from 3,350 to 3,900 mm. A longer arm reaches further, a shorter one handles a heavier bucket.
- Volvo gives a lifting capacity of 8,450 kg. Check a heavy grab or hammer, plus its load, against the full load chart.
- For transport it measures 12,735 x 3,415 x 3,510 mm (length, width, height).
- Engine power is 284 kW.
Figures as published by Volvo in its own documents.
How the EC480E HR compares with its neighbours
The nearest models by weight, with the difference to the EC480E HR in parentheses where both makers publish the figure.
| Model | Operating weight | Max dig depth | Main pump flow |
|---|---|---|---|
| EC480E HR | 63.52 t | 8,280 mm | 752 l/min |
| Volvo EC500 High Reach | 61.3 t (-2.22 t) | 8,040 mm (-240) | 752 l/min |
| Volvo EC550E | 53.74 t (-9.78 t) | 7,690 mm (-590) | 832 l/min (+80) |
| Kobelco SK550DLC-11E | 63.2 t (-0.32 t) | 6,260 mm (-2,020) | 740 l/min (-12) |
Figures as each maker publishes them. A difference is shown only where both machines have a published value.
EC480E HR: build years and variants
Build years: 2019–2026
Variants
- EC480E HR (2019–2026)
Years and variants as listed in the LECTURA Specs database.
EC480E HR: what the brochure names
Features Volvo names in its own brochure for the EC480E HR. Some of them may be optional, so check the machine's spec before you order.
- An engine that meets EU Stage V.
- Telematics for tracking the machine remotely.
- Proportional control of the auxiliary hydraulics, for tilt buckets, augers and breakers.
- Automatic engine idle when the controls are left alone.
From Volvo's published brochure. We keep the source document on file.
Questions about the EC480E HR
- Which quick coupler is installed on your EC480E HR?
- Volvo lists this coupler for it: Volvo hydraulic quick fit. Order attachments with the matching bracket.
Special machine configuration (High reach). Engineering review is required before you select an attachment. The families below are matched by operating weight only.
Get a priceEach family shows its candidate models by operating-weight range.
Volvo EC480E HR: machine data
- Operating weight
- 63,520 kg
- Engine power
- 284 kW
- Maximum digging depth
- 8,280 mm
- Maximum dump height
- 10,410 mm
- Quick coupler
- Volvo hydraulic quick fit
As published by Volvo, retrieved 2026-09-17. Source
Before you order: check the interface
The weight class of the Volvo EC480E HR sizes the attachment. It does not tell you the pin diameter, the pin spacing or the stick width, and those decide whether an attachment fits. Measure them on the machine, or send us the measurements of the bucket it runs today.
Heavy excavators dig rock, load trucks and work in quarries, so wear decides the bucket as much as capacity does. Rock and reinforced buckets carry thicker wear steel, teeth and side cutters, and the bucket is sized to the trucks it loads and to the density of the material.
Quick coupler brackets at this weight
In our model tables, the attachments listed for the Volvo EC480E HR at its weight are built with these brackets. Each code opens the models that list it.
- Measure the diameter of both bucket pins.
- Measure the distance between the pin centres.
- Measure the inside width between the stick ears.
- If the machine runs a quick coupler, note its make and type.
What these terms mean:
How to choose an attachment for the job:
Other Volvo models of a similar weight
Other makes of a similar weight
Operating weight within 2 t of the Volvo EC480E HR.
Other Volvo models with the same coupler brackets
Our model tables give these machines the same quick coupler brackets.
Why buy from the factory
- Cutting, machining, welding and painting on one site, our own factory in Poland, EU
- More than 50,000 attachments delivered since 2008
- A record for every serial number, so the spare parts match your attachment
Need Custom Specifications?
We can manufacture attachments to your exact pin spacing and requirements for Volvo EC480E HR.
Welded to EN ISO 3834-2. Agree it as a standing term of supply and the EN 10204 3.1 certificate ships with every attachment. You also get the CE declaration of conformity for every product that carries the CE mark.
Do you sell Volvo machines? Machine dealer supply
Machine makes and model names belong to their owners. Sieruta is not affiliated with them. We use the names only to show which machines we offer attachments for, by operating weight.