Attachments for the Sany SY500HRD weight range
Price & lead timeGet price & lead time- We usually reply within 1 working day
- We check the fit before we send the quote
- Every offer names the dispatch week
- If a bracket we made is wrong and does not fit your machine, we replace it.
How is the attachment mounted on this machine?
Tell us what is on the machine now. It narrows the sizes we show and goes with your enquiry. It does not confirm fit: we check the bracket before we send the quote.
Catalogue sizes for the SY500HRD
Each size below has a catalogue row rated for a carrier of 64,000 kg operating weight. Tell us which sizes you want and we reply with an offer.
Each family shows its candidate models by operating-weight range.
The attachments buyers in your market ask for first, sized for the SY500HRD.
On a narrow screen the table scrolls sideways.
Tools
| Attachment | Sizes | Heaped capacity ISO 7451 [dm³] | Width [mm] | Weight [kg] |
|---|---|---|---|---|
Non-bucket attachments | ||||
| RIP - heavy duty ripper | Ripper-H | 684 | ||
Quick couplers
| Attachment | Sizes | Heaped capacity ISO 7451 [dm³] | Width [mm] | Weight [kg] |
|---|---|---|---|---|
| QC-S - S-System Scandinavian quick-couplerStart herePrice & lead timeGet price & lead timeS-System (Scandinavian) | QC-S90 | 750 |
Welded to EN ISO 3834-2. Agree it as a standing term of supply and the EN 10204 3.1 certificate ships with every attachment. You also get the CE declaration of conformity for every attachment. See the certificates.
Message us on WhatsAppPhotos and voice notes are welcome.Which coupler is on your machine?
Pick the system on your machine and we put it in your enquiry. We check the bracket before we send the quote.
How to measure your coupler
Not sure which system it is? Three measurements tell us which bracket you need.
- Measure the diameter of both pins.
- Measure the distance between the pin centres.
- Measure the width between the inside faces of the ears.
If the coupler has a make or type printed on it, send that too.
Before you order: check the interface
The weight class of the Sany SY500HRD sizes the attachment. It does not tell you the pin diameter, the pin spacing or the stick width, and those decide whether an attachment fits. Measure them on the machine, or send us the measurements of the bucket it runs today.
Heavy excavators dig rock, load trucks and work in quarries, so wear decides the bucket as much as capacity does. Rock and reinforced buckets carry thicker wear steel, teeth and side cutters, and the bucket is sized to the trucks it loads and to the density of the material.DBS - engineered rock bucket for excavator
Quick coupler brackets at this weight
In our model tables, the attachments listed for the Sany SY500HRD at its weight are built with these brackets. Each code opens the models that list it.
- Measure the diameter of both bucket pins.
- Measure the distance between the pin centres.
- Measure the inside width between the stick ears.
- If the machine runs a quick coupler, note its make and type.
What these terms mean:
How to choose an attachment for the job:
Sizes are matched to the published operating weight of the SY500HRD.
- Weight Class
- Heavy Excavator (30–65 t)
- Operating Weight
- 64,000 kg
- Family-owned group, founded in 1996
- More than 50,000 attachments delivered
- Built in our own factory in Poland
Operating weight as published by Sany, retrieved 2026-09-11. Source
Sany SY500HRD: machine data
- Operating weight
- 64,000 kg
- Engine power
- 298 kW
- Auxiliary circuit flow
- 720 l/min
- Max reach
- 15,285 mmmaker's document (sanyeurope.com)
- Arm length
- 3,350–8,500 mmmaker's document (sanyeurope.com)
- Main pump flow
- 720 l/minmaker's document (sanyeurope.com)
- Transport width
- 3,400 mmmaker's document (sanyeurope.com)
As published by Sany, retrieved 2026-09-19. Source
What the SY500HRD figures mean for its attachments
- Its auxiliary circuit delivers 720 l/min. A breaker, auger, tilt rotator or other hydraulic tool states the oil flow it needs, so choose one whose range includes this figure.
- The main pump delivers up to 720 l/min at 343 bar. That is the pump output of the whole machine, not the flow an attachment gets.
- Its maximum reach is 15,285 mm.
- Sany offers arms from 3,350 to 8,500 mm. A longer arm reaches further, a shorter one handles a heavier bucket.
- For transport it measures 20,000 x 3,400 x 3,950 mm (length, width, height).document from lectura-specs.com
- Engine power is 298 kW.
Figures without a source note are as published by Sany in its own documents.
How the SY500HRD compares with its neighbours
The nearest models by weight, with the difference to the SY500HRD in parentheses where both makers publish the figure.
| Model | Operating weight | Main pump flow | Auxiliary flow |
|---|---|---|---|
| SY500HRD | 64 t | 720 l/min | 720 l/min |
| Sany SY750H | 78.5 t (+14.5 t) | 1,008 l/min (+288) | not published |
| Sany SY390H | 40.15 t (-23.85 t) | 704 l/min (-16) | 550 l/min (-170) |
| Volvo EC480E HR | 63.52 t (-0.48 t) | 752 l/min (+32) | not published |
Figures as each maker publishes them. A difference is shown only where both machines have a published value.
SY500HRD: build years and variants
Build years: 2018–2026
Variants
- SY500HRD (2018–2026)
Years and variants as listed in the LECTURA Specs database.
Other Sany models of a similar weight
Other makes of a similar weight
Operating weight within 2 t of the Sany SY500HRD.
Other Sany models with the same coupler brackets
Our model tables give these machines the same quick coupler brackets.
Why buy from the factory
- Cutting, machining, welding and painting on one site, our own factory in Poland, EU
- More than 50,000 attachments delivered since 2008
- A record for every serial number, so the spare parts match your attachment
Need Custom Specifications?
We can manufacture attachments to your exact pin spacing and requirements for Sany SY500HRD.
Questions about the SY500HRD
- Can the SY500HRD run a hydraulic attachment?
- Yes, if the tool's rated oil flow range includes the 720 l/min of its auxiliary circuit.
For publishers: cite or embed this table
Cite this table as https://sieruta.com/en/fit/sany/sany-sy500hrd, figures as of 2026-09-11.
Embed this table on your site
Copy the HTML below into your page. It keeps the link back to this page and the date of the figures.
Do you sell Sany machines? Machine dealer supply
Machine makes and model names belong to their owners. Sieruta is not affiliated with them. We use the names only to show which machines we offer attachments for, by operating weight.