Attachments for the Sany SY980H weight range
Weight Class: Above our standard range: ask us Operating Weight: 95,000 kg
Ask our engineers- We usually reply within 1 working day
- We check the fit before we send the quote
- Every offer names the dispatch week
- If a bracket we made is wrong and does not fit your machine, we replace it.
How is the attachment mounted on this machine?
Tell us what is on the machine now. It narrows the sizes we show and goes with your enquiry. It does not confirm fit: we check the bracket before we send the quote.
These machines weigh more than 80 t, the limit of what we build to order. Send us the machine details and we tell you what we can build.
Before you order: check the interface
The weight class of the Sany SY980H sizes the attachment. It does not tell you the pin diameter, the pin spacing or the stick width, and those decide whether an attachment fits. Measure them on the machine, or send us the measurements of the bucket it runs today.
Heavy excavators dig rock, load trucks and work in quarries, so wear decides the bucket as much as capacity does. Rock and reinforced buckets carry thicker wear steel, teeth and side cutters, and the bucket is sized to the trucks it loads and to the density of the material.
- Measure the diameter of both bucket pins.
- Measure the distance between the pin centres.
- Measure the inside width between the stick ears.
- If the machine runs a quick coupler, note its make and type.
What these terms mean:
Sizes are matched to the published operating weight of the SY980H.
- Weight Class
- Above our standard range: ask us
- Operating Weight
- 95,000 kg
- Family-owned group, founded in 1996
- More than 50,000 attachments delivered
- Built in our own factory in Poland
Operating weight as published by Sany, retrieved 2026-09-11. Source
Sany SY980H: machine data
- Operating weight
- 95,000 kg
- Engine power
- 478 kW
- Maximum digging depth
- 7,062 mm
- Maximum dump height
- 8,000 mm
- Bucket breakout force
- 495 kN
- Arm crowd force
- 469 kN
- Max reach
- 12,557 mm maker's document (sanyeurope.com)
- Arm length
- 2,920 mm maker's document (sanyeurope.com)
- Main pump flow
- 1,130 l/min maker's document (sanyeurope.com)
- Bucket capacity
- 6.5 m³ maker's document (sanyeurope.com)
- Transport width
- 4,160 mm maker's document (sanyeurope.com)
As published by Sany, retrieved 2026-09-19. Source
What the SY980H figures mean for its attachments
- The main pump delivers up to 1,130 l/min at 343 bar. That is the pump output of the whole machine, not the flow an attachment gets.
- It digs down to 7,062 mm. That is the deepest trench it can open.
- Its maximum reach is 12,557 mm.
- It dumps at up to 8,000 mm, so a truck or skip side has to sit below that height.
- Its arm is 2,920 mm long.
- Sany lists a bucket capacity of 6.5 m³.
- Bucket breakout force is 495 kN and arm crowd force 469 kN. That is the force a bucket or ripper works with at the tooth.
- For transport it measures 13,930 x 4,160 x 5,463 mm (length, width, height).
- Engine power is 478 kW.
Figures as published by Sany in its own documents.
How the SY980H compares with its neighbours
The nearest models by weight, with the difference to the SY980H in parentheses where both makers publish the figure.
| Model | Operating weight | Max dig depth | Main pump flow |
|---|---|---|---|
| SY980H | 95 t | 7,062 mm | 1,130 l/min |
| Sany SY750H | 78.5 t (-16.5 t) | 7,580 mm (+518) | 1,008 l/min (-122) |
| Sany SY500HRD | 64 t (-31 t) | not published | 720 l/min (-410) |
| Komatsu PC950LC-11 | 95 t | 8,995 mm (+1,933) | 1,206 l/min (+76) |
Figures as each maker publishes them. A difference is shown only where both machines have a published value.
Other Sany models of a similar weight
Other makes of a similar weight
Operating weight within 2 t of the Sany SY980H.
Why buy from the factory
- Cutting, machining, welding and painting on one site, our own factory in Poland, EU
- More than 50,000 attachments delivered since 2008
- A record for every serial number, so the spare parts match your attachment
Above the 80 t limit
The Sany SY980H is above the 80 t class we build for. Send us its details and our engineers tell you whether a build is feasible.
Welded to EN ISO 3834-2. Agree it as a standing term of supply and the EN 10204 3.1 certificate ships with every attachment. You also get the CE declaration of conformity for every quick coupler and hydraulic attachment. See the certificates.
Questions about the SY980H
- What bucket size fits the SY980H?
- Sany lists a bucket capacity of 6.5 m³ for it.
Do you sell Sany machines? Machine dealer supply
Machine makes and model names belong to their owners. Sieruta is not affiliated with them. We use the names only to show which machines we offer attachments for, by operating weight.