Attachments for the Caterpillar 395 weight range
Price & lead timeGet price & lead time- We usually reply within 1 working day
- We check the fit before we send the quote
- Every offer names the dispatch week
- If a bracket we made is wrong and does not fit your machine, we replace it.
How is the attachment mounted on this machine?
Tell us what is on the machine now. It narrows the sizes we show and goes with your enquiry. It does not confirm fit: we check the bracket before we send the quote.
These machines weigh more than 80 t, the limit of what we build to order. Send us the machine details and we tell you what we can build.
Which coupler is on your machine?
Pick the system on your machine and we put it in your enquiry. We check the bracket before we send the quote.
How to measure your coupler
Not sure which system it is? Three measurements tell us which bracket you need.
- Measure the diameter of both pins.
- Measure the distance between the pin centres.
- Measure the width between the inside faces of the ears.
If the coupler has a make or type printed on it, send that too.
Before you order: check the interface
The weight class of the Caterpillar 395 sizes the attachment. It does not tell you the pin diameter, the pin spacing or the stick width, and those decide whether an attachment fits. Measure them on the machine, or send us the measurements of the bucket it runs today.
Heavy excavators dig rock, load trucks and work in quarries, so wear decides the bucket as much as capacity does. Rock and reinforced buckets carry thicker wear steel, teeth and side cutters, and the bucket is sized to the trucks it loads and to the density of the material.
- Measure the diameter of both bucket pins.
- Measure the distance between the pin centres.
- Measure the inside width between the stick ears.
- If the machine runs a quick coupler, note its make and type.
What these terms mean:
Sizes are matched to the published operating weight of the 395.
- Weight Class
- Above our standard range: custom build, ask us
- Operating Weight
- 94,000 kg
- Family-owned group, founded in 1996
- More than 50,000 attachments delivered
- Built in our own factory in Poland
Operating weight as published by Caterpillar, retrieved 2026-09-13. Source
Caterpillar 395: machine data
- Max dig depth
- 8,970 mmmaker's document via s7d2.scene7.com
- Max reach
- 14,060 mmmaker's document via s7d2.scene7.com
- Max dump height
- 8,960 mmmaker's document via s7d2.scene7.com
- Arm length
- 2,920–3,700 mmmaker's document via s7d2.scene7.com
- Main pump flow
- 1,064 l/minmaker's document via s7d2.scene7.com
- Bucket capacity
- 3.88–6.5 m³maker's document via s7d2.scene7.com
- Bucket width
- 1,750–2,300 mmmaker's document via s7d2.scene7.com
- Quick coupler
- Cat Pin Grabber Couplermaker's document via s7d2.scene7.com
- Transport width
- 3,690 mmmaker's document via s7d2.scene7.com
What the 395 figures mean for its attachments
- The main pump delivers up to 1,064 l/min at 370 bar. That is the pump output of the whole machine, not the flow an attachment gets.
- Caterpillar lists this quick coupler for it: Cat Pin Grabber Coupler. The bracket on every attachment has to match the coupler.
- It digs down to 8,970 mm. That is the deepest trench it can open.
- Its maximum reach is 14,060 mm.
- It dumps at up to 8,960 mm, so a truck or skip side has to sit below that height.
- Caterpillar offers arms from 2,920 to 3,700 mm. A longer arm reaches further, a shorter one handles a heavier bucket.
- Caterpillar lists buckets from 1,750 to 2,300 mm wide for this machine.
- Caterpillar lists bucket capacities from 3.88 to 6.5 m³.
- Bucket breakout force is 383 kN and arm crowd force 342 kN. That is the force a bucket or ripper works with at the tooth.
- For transport it measures 15,110 x 3,690 x 5,160 mm (length, width, height).
Figures as published by Caterpillar in its own documents.
How the 395 compares with its neighbours
The nearest models by weight, with the difference to the 395 in parentheses where both makers publish the figure.
| Model | Operating weight | Max dig depth | Main pump flow |
|---|---|---|---|
| 395 | 94 t | 8,970 mm | 1,064 l/min |
| Caterpillar 395 Front Shovel (FS) | 96.3 t (+2.3 t) | 2,930 mm (-6,040) | 1,008 l/min (-56) |
| Caterpillar 374 | 73.89 t (-20.11 t) | 8,570 mm (-400) | 896 l/min (-168) |
| LiuGong 995F | 94.8 t (+0.8 t) | 7,185 mm (-1,785) | 952 l/min (-112) |
Figures as each maker publishes them. A difference is shown only where both machines have a published value.
395: what the brochure names
Features Caterpillar names in its own brochure for the 395. Some of them may be optional, so check the machine's spec before you order.
- An engine that meets EU Stage V.
- Telematics for tracking the machine remotely (VisionLink).
- Use with a tiltrotator.
- Work modes you select from the cab.
From Caterpillar's published brochure. We keep the source document on file.
Other Caterpillar models of a similar weight
Other makes of a similar weight
Operating weight within 2 t of the Caterpillar 395.
Why buy from the factory
- Cutting, machining, welding and painting on one site, our own factory in Poland, EU
- More than 50,000 attachments delivered since 2008
- A record for every serial number, so the spare parts match your attachment
Need Custom Specifications?
We can manufacture attachments to your exact pin spacing and requirements for Caterpillar 395.
Welded to EN ISO 3834-2. Agree it as a standing term of supply and the EN 10204 3.1 certificate ships with every attachment. You also get the CE declaration of conformity for every attachment. See the certificates.
Questions about the 395
- What bucket width fits the 395?
- Caterpillar lists buckets from 1,750 to 2,300 mm wide for it. Pick a width in that range.
- Which quick coupler is installed on your 395?
- Caterpillar lists this coupler for it: Cat Pin Grabber Coupler. Order attachments with the matching bracket.
Do you sell Caterpillar machines? Machine dealer supply
Machine makes and model names belong to their owners. Sieruta is not affiliated with them. We use the names only to show which machines we offer attachments for, by operating weight.