Attachments for the LiuGong 995F weight range
Weight Class: Above our standard range: ask us Operating Weight: 94,800 kg
Ask our engineers- We usually reply within 1 working day
- We check the fit before we send the quote
- Every offer names the dispatch week
- If a bracket we made is wrong and does not fit your machine, we replace it.
How is the attachment mounted on this machine?
Tell us what is on the machine now. It narrows the sizes we show and goes with your enquiry. It does not confirm fit: we check the bracket before we send the quote.
These machines weigh more than 80 t, the limit of what we build to order. Send us the machine details and we tell you what we can build.
Before you order: check the interface
The weight class of the LiuGong 995F sizes the attachment. It does not tell you the pin diameter, the pin spacing or the stick width, and those decide whether an attachment fits. Measure them on the machine, or send us the measurements of the bucket it runs today.
Heavy excavators dig rock, load trucks and work in quarries, so wear decides the bucket as much as capacity does. Rock and reinforced buckets carry thicker wear steel, teeth and side cutters, and the bucket is sized to the trucks it loads and to the density of the material.
- Measure the diameter of both bucket pins.
- Measure the distance between the pin centres.
- Measure the inside width between the stick ears.
- If the machine runs a quick coupler, note its make and type.
What these terms mean:
Sizes are matched to the published operating weight of the 995F.
- Weight Class
- Above our standard range: ask us
- Operating Weight
- 94,800 kg
- Family-owned group, founded in 1996
- More than 50,000 attachments delivered
- Built in our own factory in Poland
Operating weight as published by LiuGong, retrieved 2026-09-11. Source
LiuGong 995F: machine data
- Operating weight
- 94,800 kg
- Engine power
- 433 kW
- Maximum digging depth
- 7,185 mm
- Maximum dump height
- 7,979 mm
- Bucket breakout force
- 477 kN
- Arm crowd force
- 364 kN
- Max reach
- 12,172 mm maker's document (liugong.eu)
- Arm length
- 2,925 mm maker's document (liugong.eu)
- Main pump flow
- 952 l/min maker's document (liugong.eu)
- Bucket capacity
- 6.2 m³ maker's document (liugong.eu)
- Transport width
- 3,400 mm maker's document (liugong.eu)
As published by LiuGong, retrieved 2026-09-18. Source
- Pin diameter
- 140 mm Source: Tuff Buckets. From a dealer's table. It does not say which arm or quick coupler was fitted.
A guide only. Measure the pins before you order.
What the 995F figures mean for its attachments
- The main pump delivers up to 952 l/min at 350 bar. That is the pump output of the whole machine, not the flow an attachment gets.
- It digs down to 7,185 mm. That is the deepest trench it can open.
- Its maximum reach is 12,172 mm.
- It dumps at up to 7,979 mm, so a truck or skip side has to sit below that height.
- Its arm is 2,925 mm long.
- LiuGong lists a bucket capacity of 6.2 m³.
- Bucket breakout force is 477 kN and arm crowd force 364 kN. That is the force a bucket or ripper works with at the tooth.
- For transport it measures 13,887 x 3,400 x 5,228 mm (length, width, height).
- Engine power is 433 kW.
Figures as published by LiuGong in its own documents.
How the 995F compares with its neighbours
The nearest models by weight, with the difference to the 995F in parentheses where both makers publish the figure.
| Model | Operating weight | Max dig depth | Main pump flow |
|---|---|---|---|
| 995F | 94.8 t | 7,185 mm | 952 l/min |
| LiuGong 975F | 75 t (-19.8 t) | 7,680 mm (+495) | 1,008 l/min (+56) |
| Komatsu PC950LC-11 | 95 t (+0.2 t) | 8,995 mm (+1,810) | 1,206 l/min (+254) |
Figures as each maker publishes them. A difference is shown only where both machines have a published value.
Other LiuGong models of a similar weight
Other makes of a similar weight
Operating weight within 2 t of the LiuGong 995F.
Why buy from the factory
- Cutting, machining, welding and painting on one site, our own factory in Poland, EU
- More than 50,000 attachments delivered since 2008
- A record for every serial number, so the spare parts match your attachment
Above the 80 t limit
The LiuGong 995F is above the 80 t class we build for. Send us its details and our engineers tell you whether a build is feasible.
Welded to EN ISO 3834-2. Agree it as a standing term of supply and the EN 10204 3.1 certificate ships with every attachment. You also get the CE declaration of conformity for every quick coupler and hydraulic attachment. See the certificates.
Questions about the 995F
- What bucket size fits the 995F?
- LiuGong lists a bucket capacity of 6.2 m³ for it.
Do you sell LiuGong machines? Machine dealer supply
Machine makes and model names belong to their owners. Sieruta is not affiliated with them. We use the names only to show which machines we offer attachments for, by operating weight.