Attachments for the LiuGong 975F weight range
Price & dispatch week- We usually reply within 1 working day
- We check the fit before we send the quote
- Every offer names the dispatch week
- If a bracket we made is wrong and does not fit your machine, we replace it.
Sizes are matched to the published operating weight of the 975F.
- Weight Class
- Above 65 t: custom build
- Operating Weight
- 75,000 – 77,000 kg
- Family-owned group, founded in 1996
- More than 50,000 attachments delivered
- Built in our own factory in Poland
Operating weight as published by LiuGong, retrieved 2026-09-11. Source
Which coupler is on your machine?
Pick the system on your machine and we put it in your enquiry. We check the bracket before we send the quote.
How to measure your coupler
Not sure which system it is? Three measurements tell us which bracket you need.
- Measure the diameter of both pins.
- Measure the distance between the pin centres.
- Measure the width between the inside faces of the ears.
If the coupler has a make or type printed on it, send that too.
975F at a glance
| Figure | Value | Source |
|---|---|---|
| Max dig depth | 7,680 mm | maker's website (liugong.eu) |
| Max reach | 11,900 mm | maker's document (liugong.eu) |
| Max dump height | 7,020 mm | maker's website (liugong.eu) |
| Arm length | 2,900 mm | maker's document (liugong.eu) |
| Main pump flow | 1,008 l/min | maker's document (liugong.eu) |
| Bucket capacity | 5 m³ | maker's document (liugong.eu) |
| Bucket width | 2,280 mm | maker's document (liugong.eu) |
Only figures the maker publishes for this model. Where a figure is missing, no value is shown.
What the 975F figures mean for its attachments
- The main pump delivers up to 1,008 l/min at 350 bar. That is the pump output of the whole machine, not the flow an attachment gets.
- It digs down to 7,680 mm. That is the deepest trench it can open.
- Its maximum reach is 11,900 mm.
- It dumps at up to 7,020 mm, so a truck or skip side has to sit below that height.
- Its arm is 2,900 mm long.
- LiuGong lists a 2,280 mm wide bucket for this machine. Compare that with the bucket widths in the table above.
- LiuGong lists a bucket capacity of 5 m³.
Figures as published by LiuGong in its own documents.
How the 975F compares with its neighbours
The nearest models by weight, with the difference to the 975F in parentheses where both makers publish the figure.
| Model | Operating weight | Max dig depth | Main pump flow |
|---|---|---|---|
| 975F | 75 t | 7,680 mm | 1,008 l/min |
| LiuGong 995F | 94.8 t (+19.8 t) | 7,185 mm (-495) | 952 l/min (-56) |
| Caterpillar 374 | 73.89 t (-1.11 t) | 8,570 mm (+890) | 896 l/min (-112) |
Figures as each maker publishes them. A difference is shown only where both machines have a published value.
975F: build years and variants
Build years: 2025–2026
Variants
- 975F (2025–2026)
Years and variants as listed in the LECTURA Specs database.
Questions about the 975F
- What bucket width fits the 975F?
- LiuGong lists a 2,280 mm wide bucket for it. Compare that with the sizes above.
No attachment family in our catalogue is listed above 65 t. For a machine of this weight we make the attachment to order: send us the machine details and our engineers reply with an offer.
LiuGong 975F: machine data
- Operating weight
- 75,000 – 77,000 kg
- Maximum digging depth
- 7,680 mm
- Maximum dump height
- 7,020 mm
As published by LiuGong, retrieved 2026-09-17. Source
Before you order: check the interface
The weight class of the LiuGong 975F sizes the attachment. It does not tell you the pin diameter, the pin spacing or the stick width, and those decide whether an attachment fits. Measure them on the machine, or send us the measurements of the bucket it runs today.
Heavy excavators dig rock, load trucks and work in quarries, so wear decides the bucket as much as capacity does. Rock and reinforced buckets carry thicker wear steel, teeth and side cutters, and the bucket is sized to the trucks it loads and to the density of the material.
- Measure the diameter of both bucket pins.
- Measure the distance between the pin centres.
- Measure the inside width between the stick ears.
- If the machine runs a quick coupler, note its make and type.
What these terms mean:
Other LiuGong models of a similar weight
Other makes of a similar weight
Operating weight within 2 t of the LiuGong 975F.
Why buy from the factory
- Cutting, machining, welding and painting on one site, our own factory in Poland, EU
- More than 50,000 attachments delivered since 2008
- A record for every serial number, so the spare parts match your attachment
Need Custom Specifications?
We can manufacture attachments to your exact pin spacing and requirements for LiuGong 975F.
Welded to EN ISO 3834-2. Agree it as a standing term of supply and the EN 10204 3.1 certificate ships with every attachment. You also get the CE declaration of conformity for every product that carries the CE mark.
Do you sell LiuGong machines? Machine dealer supply
Machine makes and model names belong to their owners. Sieruta is not affiliated with them. We use the names only to show which machines we offer attachments for, by operating weight.