Attachments for the Kobelco SK650DLC-11 weight range
Price & dispatch week- We usually reply within 1 working day
- We check the fit before we send the quote
- Every offer names the dispatch week
- If a bracket we made is wrong and does not fit your machine, we replace it.
Sizes are matched to the published operating weight of the SK650DLC-11.
- Weight Class
- Above 65 t: custom build
- Operating Weight
- 76,200 – 80,700 kg
- Family-owned group, founded in 1996
- More than 50,000 attachments delivered
- Built in our own factory in Poland
Operating weight as published by Kobelco, retrieved 2026-09-10. Source
Which coupler is on your machine?
Pick the system on your machine and we put it in your enquiry. We check the bracket before we send the quote.
How to measure your coupler
Not sure which system it is? Three measurements tell us which bracket you need.
- Measure the diameter of both pins.
- Measure the distance between the pin centres.
- Measure the width between the inside faces of the ears.
If the coupler has a make or type printed on it, send that too.
SK650DLC-11 at a glance
| Figure | Value | Source |
|---|---|---|
| Arm length | 3,450–8,200 mm | maker's document (kobelco-europe.com) |
| Main pump flow | 740 l/min | maker's document (kobelco-europe.com) |
| Auxiliary pressure | 245 bar | maker's document (kobelco-europe.com) |
Only figures the maker publishes for this model. Where a figure is missing, no value is shown.
What the SK650DLC-11 figures mean for its attachments
- Its auxiliary circuit works at 245 bar. Check that any hydraulic tool you add is rated for that pressure.
- The main pump delivers up to 740 l/min at 343 bar. That is the pump output of the whole machine, not the flow an attachment gets.
- Kobelco offers arms from 3,450 to 8,200 mm. A longer arm reaches further, a shorter one handles a heavier bucket.
- Its tail swing radius is 3,900 mm, which matters beside a wall or in a live traffic lane.
- Engine power is 348 kW.
Figures as published by Kobelco in its own documents.
How the SK650DLC-11 compares with its neighbours
The nearest models by weight, with the difference to the SK650DLC-11 in parentheses where both makers publish the figure.
| Model | Operating weight | Main pump flow |
|---|---|---|
| SK650DLC-11 | 76.2 t | 740 l/min |
| Kobelco SK850LC | 80.5 t (+4.3 t) | 1,008 l/min (+268) |
| Kobelco SK850LC-11 | 81.8 t (+5.6 t) | 1,008 l/min (+268) |
| Komatsu PC750SE-7 | 76.2 t | 988 l/min (+248) |
Figures as each maker publishes them. A difference is shown only where both machines have a published value.
SK650DLC-11: what the brochure names
Features Kobelco names in its own brochure for the SK650DLC-11. Some of them may be optional, so check the machine's spec before you order.
- An engine that meets EU Stage V.
- Automatic engine idle when the controls are left alone.
- Work modes you select from the cab.
From Kobelco's published brochure. We keep the source document on file.
No attachment family in our catalogue is listed above 65 t. For a machine of this weight we make the attachment to order: send us the machine details and our engineers reply with an offer.
Kobelco SK650DLC-11: machine data
- Operating weight
- 76,200 – 80,700 kg
- Engine power
- 348 kW
- Tail swing radius
- 3,900 mm
- Auxiliary circuit pressure
- 245 bar
As published by Kobelco, retrieved 2026-09-18. Source
Before you order: check the interface
The weight class of the Kobelco SK650DLC-11 sizes the attachment. It does not tell you the pin diameter, the pin spacing or the stick width, and those decide whether an attachment fits. Measure them on the machine, or send us the measurements of the bucket it runs today.
Heavy excavators dig rock, load trucks and work in quarries, so wear decides the bucket as much as capacity does. Rock and reinforced buckets carry thicker wear steel, teeth and side cutters, and the bucket is sized to the trucks it loads and to the density of the material.
- Measure the diameter of both bucket pins.
- Measure the distance between the pin centres.
- Measure the inside width between the stick ears.
- If the machine runs a quick coupler, note its make and type.
What these terms mean:
Other Kobelco models of a similar weight
Other makes of a similar weight
Operating weight within 2 t of the Kobelco SK650DLC-11.
Why buy from the factory
- Cutting, machining, welding and painting on one site, our own factory in Poland, EU
- More than 50,000 attachments delivered since 2008
- A record for every serial number, so the spare parts match your attachment
Need Custom Specifications?
We can manufacture attachments to your exact pin spacing and requirements for Kobelco SK650DLC-11.
Welded to EN ISO 3834-2. Agree it as a standing term of supply and the EN 10204 3.1 certificate ships with every attachment. You also get the CE declaration of conformity for every product that carries the CE mark.
Do you sell Kobelco machines? Machine dealer supply
Machine makes and model names belong to their owners. Sieruta is not affiliated with them. We use the names only to show which machines we offer attachments for, by operating weight.