Attachments for the Volvo EC750E weight range
Price & lead timeGet price & lead time- We usually reply within 1 working day
- We check the fit before we send the quote
- Every offer names the dispatch week
- If a bracket we made is wrong and does not fit your machine, we replace it.
How is the attachment mounted on this machine?
Tell us what is on the machine now. It narrows the sizes we show and goes with your enquiry. It does not confirm fit: we check the bracket before we send the quote.
No attachment family in our catalogue is listed above 65 t. For a machine of this weight we make the attachment to order: send us the machine details and our engineers reply with an offer.
Which coupler is on your machine?
Pick the system on your machine and we put it in your enquiry. We check the bracket before we send the quote.
How to measure your coupler
Not sure which system it is? Three measurements tell us which bracket you need.
- Measure the diameter of both pins.
- Measure the distance between the pin centres.
- Measure the width between the inside faces of the ears.
If the coupler has a make or type printed on it, send that too.
Before you order: check the interface
The weight class of the Volvo EC750E sizes the attachment. It does not tell you the pin diameter, the pin spacing or the stick width, and those decide whether an attachment fits. Measure them on the machine, or send us the measurements of the bucket it runs today.
Heavy excavators dig rock, load trucks and work in quarries, so wear decides the bucket as much as capacity does. Rock and reinforced buckets carry thicker wear steel, teeth and side cutters, and the bucket is sized to the trucks it loads and to the density of the material.DBS - engineered rock bucket for excavator
- Measure the diameter of both bucket pins.
- Measure the distance between the pin centres.
- Measure the inside width between the stick ears.
- If the machine runs a quick coupler, note its make and type.
What these terms mean:
Sizes are matched to the published operating weight of the EC750E.
- Weight Class
- Above 65 t: custom build
- Operating Weight
- 73,500 – 75,300 kg
- Family-owned group, founded in 1996
- More than 50,000 attachments delivered
- Built in our own factory in Poland
Operating weight as published by Volvo, retrieved 2026-09-10. Source
Volvo EC750E: machine data
- Operating weight
- 73,500 – 75,300 kg
- Maximum digging depth
- 7,210 mm
- Maximum dump height
- 8,970 mm
- Bucket breakout force
- 362 kN
- Arm crowd force
- 319 kN
- Tail swing radius
- 4,140 mm
- Max reach
- 13,500 mmmaker's document (volvoce.com)
- Arm length
- 2,900–4,200 mmmaker's document (volvoce.com)
- Main pump flow
- 900 l/minmaker's document (volvoce.com)
- Bucket capacity
- 1.99–6.1 m³maker's document (volvoce.com)
- Bucket width
- 1,200–2,510 mmmaker's document (volvoce.com)
- Lift capacity
- 41,570 kgmaker's document (volvoce.com)
- Transport width
- 4,290 mmmaker's document (volvoce.com)
As published by Volvo, retrieved 2026-09-17. Source
What the EC750E figures mean for its attachments
- The main pump delivers up to 900 l/min at 338 bar. That is the pump output of the whole machine, not the flow an attachment gets.
- It digs down to 7,210 mm. That is the deepest trench it can open.
- Its maximum reach is 13,500 mm.
- It dumps at up to 8,970 mm, so a truck or skip side has to sit below that height.
- Volvo offers arms from 2,900 to 4,200 mm. A longer arm reaches further, a shorter one handles a heavier bucket.
- Volvo lists buckets from 1,200 to 2,510 mm wide for this machine.
- Volvo lists bucket capacities from 1.99 to 6.1 m³.
- Bucket breakout force is 362 kN and arm crowd force 319 kN. That is the force a bucket or ripper works with at the tooth.
- Volvo gives a lifting capacity of 41,570 kg. Check a heavy grab or hammer, plus its load, against the full load chart.
- Its tail swing radius is 4,140 mm, which matters beside a wall or in a live traffic lane.
- For transport it measures 12,200 x 4,290 x 4,855 mm (length, width, height).
Figures as published by Volvo in its own documents.
How the EC750E compares with its neighbours
The nearest models by weight, with the difference to the EC750E in parentheses where both makers publish the figure.
| Model | Operating weight | Max dig depth | Main pump flow |
|---|---|---|---|
| EC750E | 73.5 t | 7,210 mm | 900 l/min |
| Volvo EC480E HR | 63.52 t (-9.98 t) | 8,280 mm (+1,070) | 752 l/min (-148) |
| Volvo EC500 High Reach | 61.3 t (-12.2 t) | 8,040 mm (+830) | 752 l/min (-148) |
| Caterpillar 374 | 73.89 t (+0.39 t) | 8,570 mm (+1,360) | 896 l/min (-4) |
Figures as each maker publishes them. A difference is shown only where both machines have a published value.
EC750E: build years and variants
Build years: 2016–2018
Variants
- EC750E (2016–2018)
Years and variants as listed in the LECTURA Specs database.
EC750E: what the brochure names
Features Volvo names in its own brochure for the EC750E. Some of them may be optional, so check the machine's spec before you order.
- Work modes you select from the cab.
- Operator protection certified to ROPS and FOPS.
- An engine that meets EU Stage V.
- Automatic engine idle when the controls are left alone.
From Volvo's published brochure. We keep the source document on file.
Other Volvo models of a similar weight
Other makes of a similar weight
Operating weight within 2 t of the Volvo EC750E.
Why buy from the factory
- Cutting, machining, welding and painting on one site, our own factory in Poland, EU
- More than 50,000 attachments delivered since 2008
- A record for every serial number, so the spare parts match your attachment
Need Custom Specifications?
We can manufacture attachments to your exact pin spacing and requirements for Volvo EC750E.
Welded to EN ISO 3834-2. Agree it as a standing term of supply and the EN 10204 3.1 certificate ships with every attachment. You also get the CE declaration of conformity for every attachment. See the certificates.
Questions about the EC750E
- What bucket width fits the EC750E?
- Volvo lists buckets from 1,200 to 2,510 mm wide for it. Pick a width in that range.
Do you sell Volvo machines? Machine dealer supply
Machine makes and model names belong to their owners. Sieruta is not affiliated with them. We use the names only to show which machines we offer attachments for, by operating weight.