Attachments for the CASE CX750D ME weight range
Price & dispatch week- We usually reply within 1 working day
- We check the fit before we send the quote
- Every offer names the dispatch week
- If a bracket we made is wrong and does not fit your machine, we replace it.
Sizes are matched to the published operating weight of the CX750D ME.
- Weight Class
- Above 65 t: custom build
- Operating Weight
- 72,000 kg
- Family-owned group, founded in 1996
- More than 50,000 attachments delivered
- Built in our own factory in Poland
Operating weight as published by CASE, retrieved 2026-09-10. Source
Which coupler is on your machine?
Pick the system on your machine and we put it in your enquiry. We check the bracket before we send the quote.
How to measure your coupler
Not sure which system it is? Three measurements tell us which bracket you need.
- Measure the diameter of both pins.
- Measure the distance between the pin centres.
- Measure the width between the inside faces of the ears.
If the coupler has a make or type printed on it, send that too.
CX750D ME at a glance
| Figure | Value | Source |
|---|---|---|
| Max dig depth | 7,180 mm | maker's document (cnhi-p-001-delivery.sitecorecontenthub.cloud) |
| Max reach | 11,730 mm | maker's document (cnhi-p-001-delivery.sitecorecontenthub.cloud) |
| Max dump height | 6,990 mm | maker's document (cnhi-p-001-delivery.sitecorecontenthub.cloud) |
| Arm length | 3,020 mm | maker's document (cnhi-p-001-delivery.sitecorecontenthub.cloud) |
| Main pump flow | 944 l/min | maker's document (cnhi-p-001-delivery.sitecorecontenthub.cloud) |
| Bucket capacity | 3.95–4.6 m³ | maker's document (cnhi-p-001-delivery.sitecorecontenthub.cloud) |
| Bucket width | 1,850–2,200 mm | maker's document (cnhi-p-001-delivery.sitecorecontenthub.cloud) |
| Lift capacity | 28,270 kg | maker's document (cnhi-p-001-delivery.sitecorecontenthub.cloud) |
Only figures the maker publishes for this model. Where a figure is missing, no value is shown.
What the CX750D ME figures mean for its attachments
- The main pump delivers up to 944 l/min at 314 bar. That is the pump output of the whole machine, not the flow an attachment gets.
- It digs down to 7,180 mm. That is the deepest trench it can open.
- Its maximum reach is 11,730 mm.
- It dumps at up to 6,990 mm, so a truck or skip side has to sit below that height.
- Its arm is 3,020 mm long.
- CASE lists buckets from 1,850 to 2,200 mm wide for this machine. Compare that with the bucket widths in the table above.
- CASE lists bucket capacities from 3.95 to 4.6 m³.
- CASE gives a lifting capacity of 28,270 kg. Check a heavy grab or hammer, plus its load, against the full load chart.
Figures as published by CASE in its own documents.
How the CX750D ME compares with its neighbours
The nearest models by weight, with the difference to the CX750D ME in parentheses where both makers publish the figure.
| Model | Operating weight | Max dig depth | Main pump flow |
|---|---|---|---|
| CX750D ME | 72 t | 7,180 mm | 944 l/min |
| CASE CX750D | 71.4 t (-0.6 t) | 9,850 mm (+2,670) | 944 l/min |
| CASE CX500D ME | 51 t (-21 t) | 6,490 mm (-690) | 728 l/min (-216) |
| Volvo EC750E | 73.5 t (+1.5 t) | 7,210 mm (+30) | 900 l/min (-44) |
Figures as each maker publishes them. A difference is shown only where both machines have a published value.
CX750D ME: build years and variants
Build years: 2017–2026
Variants
- CX750D ME (2017–2019)
- CX750D ME (2019–2026)
Years and variants as listed in the LECTURA Specs database.
CX750D ME: what the brochure names
Features CASE names in its own brochure for the CX750D ME. Some of them may be optional, so check the machine's spec before you order.
- Automatic engine idle when the controls are left alone.
- Work modes you select from the cab.
- An engine that meets EU Stage V.
- A rear or side view camera.
From CASE's published brochure. We keep the source document on file.
Questions about the CX750D ME
- What bucket width fits the CX750D ME?
- CASE lists buckets from 1,850 to 2,200 mm wide for it. Pick a width in that range from the sizes above.
No attachment family in our catalogue is listed above 65 t. For a machine of this weight we make the attachment to order: send us the machine details and our engineers reply with an offer.
Before you order: check the interface
The weight class of the CASE CX750D ME sizes the attachment. It does not tell you the pin diameter, the pin spacing or the stick width, and those decide whether an attachment fits. Measure them on the machine, or send us the measurements of the bucket it runs today.
Heavy excavators dig rock, load trucks and work in quarries, so wear decides the bucket as much as capacity does. Rock and reinforced buckets carry thicker wear steel, teeth and side cutters, and the bucket is sized to the trucks it loads and to the density of the material.
- Measure the diameter of both bucket pins.
- Measure the distance between the pin centres.
- Measure the inside width between the stick ears.
- If the machine runs a quick coupler, note its make and type.
What these terms mean:
Other CASE models of a similar weight
Other makes of a similar weight
Operating weight within 2 t of the CASE CX750D ME.
Why buy from the factory
- Cutting, machining, welding and painting on one site, our own factory in Poland, EU
- More than 50,000 attachments delivered since 2008
- A record for every serial number, so the spare parts match your attachment
Need Custom Specifications?
We can manufacture attachments to your exact pin spacing and requirements for CASE CX750D ME.
Welded to EN ISO 3834-2. Agree it as a standing term of supply and the EN 10204 3.1 certificate ships with every attachment. You also get the CE declaration of conformity for every product that carries the CE mark.
Do you sell CASE machines? Machine dealer supply
Machine makes and model names belong to their owners. Sieruta is not affiliated with them. We use the names only to show which machines we offer attachments for, by operating weight.