Buckets · Digging buckets
VB - V-shape digging bucket
- We usually reply within 1 working day
- We check the fit before we send the quote
- 12 months warranty on manufacturing defects in the components Sieruta makes itself
- Every offer names the dispatch week
- If a bracket we made is wrong and does not fit your machine, we replace it.
Call +48 503 808 636 Message us on WhatsApp Photos and voice notes are welcome.
Features
- Customizable angles: The bucket angle is set to the slope the job needs, so the slope is cut in one pass.
- Slope in one pass: The slope is cut in a single pass.
- Available teeth systems: CAT J series, BYG Futura, ESCO UltraLok
About this family
V-Line Buckets cut a V-shaped ditch or slope in one pass, with the bucket angle made to your slope. Used for drainage channels, swales and road shoulders.
It is used for drainage channels, swales and road shoulders. One pass to the finished profile means less hand finishing afterwards.
Teeth are available in the CAT J series, BYG Futura and ESCO UltraLok systems, so the teeth can be matched to the ground. The bucket fits direct or on the S, MS, CW, OQ, Martin and SW brackets.
Dimensions
Typical jobs
- Creating drainage ditches with the bank angle built into the bucket
- Road construction and maintenance
- Landscaping and terrain modeling
- Agricultural land forming for irrigation channels
- Erosion control projects on slopes and banks
- General excavation requiring specific slopes
Which coupler is on your machine?
Pick the system on your machine and we put it in your enquiry. We check the bracket before we send the quote.
How to measure your coupler
Not sure which system it is? Three measurements tell us which bracket you need.
- Measure the diameter of both pins.
- Measure the distance between the pin centres.
- Measure the width between the inside faces of the ears.
If the coupler has a make or type printed on it, send that too.
Compliance, certification & documentation
- EN ISO 3834-2 Certified welding quality CSW/1293/2025
- EN 1090-1 EXC1 + EXC2 Factory production control 1433-CPR-0257
- EN ISO 9606-1 · WPQR EN ISO 15614 Qualified welders and procedures
- EN ISO 9712: VT + PT level 2 Non-destructive testing where the drawing or inspection plan requires it
- EN 10204 3.1 Material traceability
Warranty
12 months warranty on manufacturing defects in the components Sieruta makes itself.
Normal wear, misuse or overloading and unauthorised modifications are not covered. Warranty terms and claims
Why buy from the factory
- Cutting, machining, welding and painting on one site, our own factory in Poland, EU
- More than 50,000 attachments delivered since 2008
- A record for every serial number, so the spare parts match your attachment
Request a quote
Tell us your machine and the job. An engineer checks the fit, and we usually reply within 1 working day.
More from this family group
DBF Flat-top digging bucket for quick coupler
The flat top suits excavators that change attachments on a quick coupler. It comes in Economy, Standard, Heavy Duty and Rock versions.
GD Rigid grading & ditching bucket, 12–40 t
The rigid body has no tilt joint, so there are no hoses or cylinders to connect. It is used to grade surfaces and clean ditches.
GDH Heavy duty hydraulic grading & ditching bucket
The hydraulic tilt grading bucket shapes slopes and levels uneven ground.
Standard Earthmoving / heavy duty
DB Heavy duty digging bucket
A digging bucket for most materials, with a rock version for harder ground.
SDB Heavy duty skeleton DB bucket
The SDB separates material as you dig: soil falls through the ribs while stone, rubble and roots stay in the bucket.
RDBF Flat-top skeleton DBF bucket on rods
Interlocking steel rods replace the solid bottom, C45 as standard and Hardox® as an option. Soil sifts out from the rocks while you dig trenches, drains and pipe bedding.
