Buckets · Wheel loader
LSF - loader stone forks
Standard
- 2–16 tons
- On request
The LSF stone forks are made of high-strength steel rods and carry large stones, boulders and debris. Earth and gravel fall through the gaps between the rods, so less earth is carried away with the stones.
About this family
The LSF stone forks carry large stones and boulders. The high-strength steel rods let a loader clear rocky ground.
There are three sizes: LSF-60 for loaders from 2 to 6 t (1480 mm wide, 241 kg), LSF-100 for 6 to 10 t (2030 mm, 330 kg) and LSF-160 for 10 to 16 t (2464 mm, 896 kg). The LSF-60 and LSF-100 are 1050 mm long and 635 mm high, the LSF-160 is 1615 mm long and 845 mm high.
Features
- High-strength steel rods
- Rod spacing lets soil and gravel fall through
- Steel construction
- Three sizes for loaders from 2 to 16 t
Dimensions
The letters on the drawing match the columns in the table below.
Dimensions in mm
Typical jobs
The LSF stone forks are used for:
- Transporting large rocks, boulders, and debris
- Clearing rocky terrain and construction sites
- Landscaping work that needs rock placement
- Moving rock in quarries and mines
- Any job where rock has to be picked up and carried
The LSF stone forks let a loader pick up and carry stones. Contact us and we will help you find the right size for your loader model.
Models and specifications
Figures as printed on this family’s datasheet. A dash means the datasheet does not state that figure.
Datasheet (PDF)- Which bracket does your machine take? See the coupler fit reference
- Looking for your machine by make and model? See the machine fit tables
| Model | Machine class [t] | Width [mm] | Height [mm] | Length [mm] | Weight [kg] |
|---|---|---|---|---|---|
| LSF-60 | 2–6 | 1480 | 635 | 1050 | 241 |
| LSF-100 | 6–10 | 2030 | 635 | 1050 | 330 |
| LSF-160 | 10–16 | 2464 | 845 | 1615 | 896 |
→ Scroll the table sideways to see every model.
Compliance, certification & documentation
- EN ISO 3834-2Certified welding qualityCSW/1293/2025
- EN 1090-1 EXC1 + EXC2Factory production control1433-CPR-0257
- EN ISO 9606-1 · WPQR EN ISO 15614Qualified welders and procedures
- EN ISO 9712: VT + PT level 2Non-destructive testingwhere the drawing or inspection plan requires it
- EN 10204 3.1Material traceability
- CE: 2006/42/ECCE markingTransition to Regulation (EU) 2023/1230 underway. Applicable from 20 January 2027.
- Materials
- Standard: Rods: high-strength steel
Warranty
Sieruta covers manufacturing defects in the components it makes itself.
Normal wear, misuse or overloading and unauthorised modifications are not covered. Warranty terms and claims
Request a quote
Tell us your machine and the job. An engineer checks the fit, and we usually reply within 24–48 hours.
More from this family group
Standard
FGP - general purpose loader bucket
General purpose bucket for a front loader, for loading, unloading and stockpiling loose material.
On requestView product
Standard
FLB - levelling bucket for front loader
Wide, low levelling bucket for a front loader, made for fine grading.
On requestView product
HTP - high-tip bucket for wheel loader
A loader bucket, built to order up to 9 m³, that tips its load a second time on its own frame and cylinders. Light bulk material clears the side of a high truck or hopper the loader cannot reach on its own.
On requestView product
