Buckets · Digging buckets
TR - trapezoid profile digging bucket
Configured
- On request
Digs a finished trapezoid ditch in a single pass
About this family
TR trapezoid profile buckets cut the ditch section in a single pass: the sloped side walls form the trench walls directly, so there is no follow-up trimming.
Features
- Trapezoid Profile: The sloped side walls form the ditch section in a single pass, with no follow-up trimming.
- Narrow blade width: suits irrigation ditches and roadside drainage.
- Available teeth systems: CAT J series, BYG Futura, ESCO UltraLok
Dimensions
Dimensions in mm
Typical jobs
- Clean Results: Cuts the ditch to the trapezoid profile of the bucket with little disturbed soil, so little finishing is needed afterwards.
- Less Rework: The trapezoid profile means less material handling and less rework, so the ditch is done sooner.
- Ditching work: TR buckets dig drainage channels, irrigation ditches and utility trenches.
Compliance, certification & documentation
- EN ISO 3834-2Certified welding qualityCSW/1293/2025
- EN 1090-1 EXC1 + EXC2Factory production control1433-CPR-0257
- EN ISO 9606-1 · WPQR EN ISO 15614Qualified welders and procedures
- EN ISO 9712: VT + PT level 2Non-destructive testingwhere the drawing or inspection plan requires it
- EN 10204 3.1Material traceability
- CE: 2006/42/ECCE markingTransition to Regulation (EU) 2023/1230 underway. Applicable from 20 January 2027.
Warranty
Sieruta covers manufacturing defects in the components it makes itself.
Normal wear, misuse or overloading and unauthorised modifications are not covered. Warranty terms and claims
Request a quote
Tell us your machine and the job. An engineer checks the fit, and we usually reply within 24–48 hours.
More from this family group
StandardEarthmoving / heavy duty
DB - heavy duty digging bucket
A digging bucket for most materials, with a rock version for harder ground.
On requestView product
Standard
SDB - heavy duty skeleton DB bucket
The SDB separates material as you dig: soil falls through the ribs while stone, rubble and roots stay in the bucket.
On requestView product
Standard
DBF - flat-top digging bucket for quick coupler
The flat top suits excavators that change attachments on a quick coupler. It comes in Economy, Standard, Heavy Duty and Rock versions.
On requestView product
Standard
RDBF - flat-top skeleton DBF bucket on rods
Interlocking steel rods replace the solid bottom, C45 as standard and Hardox® as an option. Soil sifts out from the rocks while you dig trenches, drains and pipe bedding.
On requestView product
Standard
DSX - Nordic heavy duty digging bucket
Nordic profile heavy duty digging bucket for excavators from 14 to 40 t, made of Hardox® 450 for rocky ground. (Djupskopa / Graveskovl / Kuokkakauha)
On requestView product
Standard
GD - rigid grading & ditching bucket
The rigid body has no tilt joint, so there are no hoses or cylinders to connect. It is used to grade surfaces and clean ditches.
On requestView product
