Buckets · Digging buckets
VB - V-shape digging bucket
Configured
Known in Sweden as V-profilskopa · in Denmark as V-profilskovl · in Finland as V-kauha
- On request
The VB bucket cuts a V-shaped ditch, and the angle of the V is built to the slope the job calls for. Because the profile is in the bucket, the slope comes out of one pass instead of several corrections.
About this family
V-Line Buckets cut a V-shaped ditch or slope in one pass, with the bucket angle made to your slope. Used for drainage channels, swales and road shoulders.
It is used for drainage channels, swales and road shoulders. One pass to the finished profile means less hand finishing afterwards.
Teeth are available in the CAT J series, BYG Futura and ESCO UltraLok systems, so the teeth can be matched to the ground. The bucket fits direct or on the S, MS, CW, OQ, Martin and SW brackets.
Features
- Customizable angles: Tailor the bucket angle to meet your exact slope requirements, eliminating the need for multiple passes.
- Slope in one pass: The slope is cut in a single pass.
- Available teeth systems: CAT J series, BYG Futura, ESCO UltraLok
Dimensions
Dimensions in mm
Typical jobs
- Creating drainage ditches with precise angles
- Road construction and maintenance
- Landscaping and terrain modeling
- Agricultural land forming for improved irrigation
- Erosion control projects in challenging environments
- General excavation requiring specific slopes
Compliance, certification & documentation
- EN ISO 3834-2Certified welding qualityCSW/1293/2025
- EN 1090-1 EXC1 + EXC2Factory production control1433-CPR-0257
- EN ISO 9606-1 · WPQR EN ISO 15614Qualified welders and procedures
- EN ISO 9712: VT + PT level 2Non-destructive testingwhere the drawing or inspection plan requires it
- EN 10204 3.1Material traceability
- CE: 2006/42/ECCE markingTransition to Regulation (EU) 2023/1230 underway. Applicable from 20 January 2027.
Warranty
Sieruta covers manufacturing defects in the components it makes itself.
Normal wear, misuse or overloading and unauthorised modifications are not covered. Warranty terms and claims
Request a quote
Tell us your machine and the job. An engineer checks the fit, and we usually reply within 24–48 hours.
More from this family group
StandardEarthmoving / heavy duty
DB - heavy duty digging bucket
The classic digging bucket for most materials, with a rock version for harder ground.
On requestView product
Standard
SDB - heavy duty skeleton DB bucket
The SDB separates material as you dig: soil falls through the ribs while stone, rubble and roots stay in the bucket.
On requestView product
Standard
DBF - flat-top digging bucket for quick coupler
The flat top suits excavators that change attachments on a quick coupler. It comes in Economy, Standard, Heavy Duty and Rock versions.
On requestView product
Standard
RDBF - flat-top skeleton DBF bucket on rods
Interlocking steel rods replace the solid bottom, C45 as standard and Hardox® as an option. Soil sifts out from the rocks while you dig trenches, drains and pipe bedding.
On requestView product
Standard
DSX - Nordic heavy duty digging bucket
Nordic profile heavy duty digging bucket for excavators from 14 to 40 t, made of Hardox® 450 for rocky ground. (Djupskopa / Graveskovl / Kuokkakauha)
On requestView product
Standard
GD - rigid grading & ditching bucket
The rigid body has no tilt joint, so there are no hoses or cylinders to connect. It is used to grade surfaces and clean ditches.
On requestView product
