Attachments for the Develon DX800LC-7 weight range
Price & dispatch week- We usually reply within 1 working day
- We check the fit before we send the quote
- Every offer names the dispatch week
- If a bracket we made is wrong and does not fit your machine, we replace it.
Sizes are matched to the published operating weight of the DX800LC-7.
- Weight Class
- Above 65 t: custom build
- Operating Weight
- 79,500 kg
- Family-owned group, founded in 1996
- More than 50,000 attachments delivered
- Built in our own factory in Poland
Operating weight as published by Develon, retrieved 2026-09-10. Source
Which coupler is on your machine?
Pick the system on your machine and we put it in your enquiry. We check the bracket before we send the quote.
How to measure your coupler
Not sure which system it is? Three measurements tell us which bracket you need.
- Measure the diameter of both pins.
- Measure the distance between the pin centres.
- Measure the width between the inside faces of the ears.
If the coupler has a make or type printed on it, send that too.
DX800LC-7 at a glance
| Figure | Value | Source |
|---|---|---|
| Max dig depth | 8,345 mm | maker's document (eu.develon-ce.com) |
| Max reach | 12,925 mm | maker's document (eu.develon-ce.com) |
| Max dump height | 8,405 mm | maker's document (eu.develon-ce.com) |
| Arm length | 2,600–3,550 mm | maker's document (eu.develon-ce.com) |
| Main pump flow | 1,008 l/min | maker's document (eu.develon-ce.com) |
| Bucket capacity | 3.42–5.58 m³ | maker's document (eu.develon-ce.com) |
| Bucket width | 1,620–2,350 mm | maker's document (eu.develon-ce.com) |
| Transport width | 3,560 mm | maker's document (eu.develon-ce.com) |
Only figures the maker publishes for this model. Where a figure is missing, no value is shown.
What the DX800LC-7 figures mean for its attachments
- The main pump delivers up to 1,008 l/min at 350 bar. That is the pump output of the whole machine, not the flow an attachment gets.
- It digs down to 8,345 mm. That is the deepest trench it can open.
- Its maximum reach is 12,925 mm.
- It dumps at up to 8,405 mm, so a truck or skip side has to sit below that height.
- Develon offers arms from 2,600 to 3,550 mm. A longer arm reaches further, a shorter one handles a heavier bucket.
- Develon lists buckets from 1,620 to 2,350 mm wide for this machine. Compare that with the bucket widths in the table above.
- Develon lists bucket capacities from 3.42 to 5.58 m³.
- Its tail swing radius is 4,010 mm, which matters beside a wall or in a live traffic lane.
- For transport it measures 13,165 x 3,560 x 4,865 mm (length, width, height).
- Engine power is 403 kW.
Figures as published by Develon in its own documents.
How the DX800LC-7 compares with its neighbours
The nearest models by weight, with the difference to the DX800LC-7 in parentheses where both makers publish the figure.
| Model | Operating weight | Max dig depth | Main pump flow |
|---|---|---|---|
| DX800LC-7 | 79.5 t | 8,345 mm | 1,008 l/min |
| Develon DX1000LC-7 | 97 t (+17.5 t) | 8,795 mm (+450) | 1,569 l/min (+561) |
| Develon DX530DM-7 | 56.8 t (-22.7 t) | 6,330 mm (-2,015) | 780 l/min (-228) |
| Komatsu PC800LC-8 | 78.8 t (-0.7 t) | 8,450 mm (+105) | 988 l/min (-20) |
Figures as each maker publishes them. A difference is shown only where both machines have a published value.
DX800LC-7: build years and variants
Build years: 2023–2026
Variants
- DX800LC-7 (2023–2026)
Years and variants as listed in the LECTURA Specs database.
DX800LC-7: what the brochure names
Features Develon names in its own brochure for the DX800LC-7. Some of them may be optional, so check the machine's spec before you order.
- An engine that meets EU Stage V.
- Work modes you select from the cab.
- Operator protection certified to ROPS and FOPS.
- Automatic engine idle when the controls are left alone.
From Develon's published brochure. We keep the source document on file.
Questions about the DX800LC-7
- What bucket width fits the DX800LC-7?
- Develon lists buckets from 1,620 to 2,350 mm wide for it. Pick a width in that range from the sizes above.
No attachment family in our catalogue is listed above 65 t. For a machine of this weight we make the attachment to order: send us the machine details and our engineers reply with an offer.
Develon DX800LC-7: machine data
- Operating weight
- 79,500 kg
- Engine power
- 403 kW
- Maximum digging depth
- 8,345 mm
- Maximum dump height
- 8,405 mm
- Tail swing radius
- 4,010 mm
As published by Develon, retrieved 2026-09-17. Source
Before you order: check the interface
The weight class of the Develon DX800LC-7 sizes the attachment. It does not tell you the pin diameter, the pin spacing or the stick width, and those decide whether an attachment fits. Measure them on the machine, or send us the measurements of the bucket it runs today.
Heavy excavators dig rock, load trucks and work in quarries, so wear decides the bucket as much as capacity does. Rock and reinforced buckets carry thicker wear steel, teeth and side cutters, and the bucket is sized to the trucks it loads and to the density of the material.
- Measure the diameter of both bucket pins.
- Measure the distance between the pin centres.
- Measure the inside width between the stick ears.
- If the machine runs a quick coupler, note its make and type.
What these terms mean:
Other Develon models of a similar weight
Other makes of a similar weight
Operating weight within 2 t of the Develon DX800LC-7.
Why buy from the factory
- Cutting, machining, welding and painting on one site, our own factory in Poland, EU
- More than 50,000 attachments delivered since 2008
- A record for every serial number, so the spare parts match your attachment
Need Custom Specifications?
We can manufacture attachments to your exact pin spacing and requirements for Develon DX800LC-7.
Welded to EN ISO 3834-2. Agree it as a standing term of supply and the EN 10204 3.1 certificate ships with every attachment. You also get the CE declaration of conformity for every product that carries the CE mark.
Do you sell Develon machines? Machine dealer supply
Machine makes and model names belong to their owners. Sieruta is not affiliated with them. We use the names only to show which machines we offer attachments for, by operating weight.