Attachments for the Hyundai HX800A L weight range
Price & dispatch week- We usually reply within 1 working day
- We check the fit before we send the quote
- Every offer names the dispatch week
- If a bracket we made is wrong and does not fit your machine, we replace it.
Sizes are matched to the published operating weight of the HX800A L.
- Weight Class
- Above 65 t: custom build
- Operating Weight
- 82,100 kg
- Family-owned group, founded in 1996
- More than 50,000 attachments delivered
- Built in our own factory in Poland
Operating weight as published by Hyundai, retrieved 2026-09-10. Source
Which coupler is on your machine?
Pick the system on your machine and we put it in your enquiry. We check the bracket before we send the quote.
How to measure your coupler
Not sure which system it is? Three measurements tell us which bracket you need.
- Measure the diameter of both pins.
- Measure the distance between the pin centres.
- Measure the width between the inside faces of the ears.
If the coupler has a make or type printed on it, send that too.
HX800A L at a glance
| Figure | Value | Source |
|---|---|---|
| Max dig depth | 8,995 mm | maker's website (hyundai-ce.eu) |
| Max reach | 12,945 mm | maker's document (lager-doo.com) |
| Max dump height | 8,380 mm | maker's document (lager-doo.com) |
| Arm length | 2,600–4,200 mm | maker's document (lager-doo.com) |
| Main pump flow | 1,008 l/min | maker's document (lager-doo.com) |
| Bucket capacity | 4.64–5.24 m³ | maker's document (lager-doo.com) |
| Bucket width | 1,940–1,950 mm | maker's document (lager-doo.com) |
| Transport width | 3,810 mm | maker's document (lager-doo.com) |
Only figures the maker publishes for this model. Where a figure is missing, no value is shown.
What the HX800A L figures mean for its attachments
- The main pump delivers up to 1,008 l/min at 350 bar. That is the pump output of the whole machine, not the flow an attachment gets.
- It digs down to 8,995 mm. That is the deepest trench it can open.
- Its maximum reach is 12,945 mm.
- It dumps at up to 8,380 mm, so a truck or skip side has to sit below that height.
- Hyundai offers arms from 2,600 to 4,200 mm. A longer arm reaches further, a shorter one handles a heavier bucket.
- Hyundai lists buckets from 1,940 to 1,950 mm wide for this machine. Compare that with the bucket widths in the table above.
- Hyundai lists bucket capacities from 4.64 to 5.24 m³.
- Its tail swing radius is 4,100 mm, which matters beside a wall or in a live traffic lane.
- Its transport width is 3,810 mm.
- Engine power is 402 kW.
Figures as published by Hyundai in its own documents.
How the HX800A L compares with its neighbours
The nearest models by weight, with the difference to the HX800A L in parentheses where both makers publish the figure.
| Model | Operating weight | Max dig depth | Main pump flow |
|---|---|---|---|
| HX800A L | 82.1 t | 8,995 mm | 1,008 l/min |
| Hyundai HX900L | 88 t (+5.9 t) | 7,230 mm (-1,765) | 1,008 l/min |
| Hyundai HX520L | 52.4 t (-29.7 t) | 11,870 mm (+2,875) | 760 l/min (-248) |
| Kobelco SK850LC-11 | 81.8 t (-0.3 t) | 10,700 mm (+1,705) | 1,008 l/min |
Figures as each maker publishes them. A difference is shown only where both machines have a published value.
Questions about the HX800A L
- What bucket width fits the HX800A L?
- Hyundai lists buckets from 1,940 to 1,950 mm wide for it. Pick a width in that range from the sizes above.
No attachment family in our catalogue is listed above 65 t. For a machine of this weight we make the attachment to order: send us the machine details and our engineers reply with an offer.
Hyundai HX800A L: machine data
- Operating weight
- 82,100 kg
- Engine power
- 402 kW
- Maximum digging depth
- 8,995 mm
- Maximum dump height
- 8,380 mm
- Tail swing radius
- 4,100 mm
As published by Hyundai, retrieved 2026-09-18. Source
Before you order: check the interface
The weight class of the Hyundai HX800A L sizes the attachment. It does not tell you the pin diameter, the pin spacing or the stick width, and those decide whether an attachment fits. Measure them on the machine, or send us the measurements of the bucket it runs today.
Heavy excavators dig rock, load trucks and work in quarries, so wear decides the bucket as much as capacity does. Rock and reinforced buckets carry thicker wear steel, teeth and side cutters, and the bucket is sized to the trucks it loads and to the density of the material.
- Measure the diameter of both bucket pins.
- Measure the distance between the pin centres.
- Measure the inside width between the stick ears.
- If the machine runs a quick coupler, note its make and type.
What these terms mean:
Other Hyundai models of a similar weight
Other makes of a similar weight
Operating weight within 2 t of the Hyundai HX800A L.
Why buy from the factory
- Cutting, machining, welding and painting on one site, our own factory in Poland, EU
- More than 50,000 attachments delivered since 2008
- A record for every serial number, so the spare parts match your attachment
Need Custom Specifications?
We can manufacture attachments to your exact pin spacing and requirements for Hyundai HX800A L.
Welded to EN ISO 3834-2. Agree it as a standing term of supply and the EN 10204 3.1 certificate ships with every attachment. You also get the CE declaration of conformity for every product that carries the CE mark.
Do you sell Hyundai machines? Machine dealer supply
Machine makes and model names belong to their owners. Sieruta is not affiliated with them. We use the names only to show which machines we offer attachments for, by operating weight.