Attachments for the Komatsu PC750LC-6 weight range
Price & dispatch week- We usually reply within 1 working day
- We check the fit before we send the quote
- Every offer names the dispatch week
- If a bracket we made is wrong and does not fit your machine, we replace it.
Sizes are matched to the published operating weight of the PC750LC-6.
- Weight Class
- Above 65 t: custom build
- Operating Weight
- 83,700 kg
- Family-owned group, founded in 1996
- More than 50,000 attachments delivered
- Built in our own factory in Poland
Operating weight as published by Komatsu, retrieved 2026-09-10. Source
Which coupler is on your machine?
Pick the system on your machine and we put it in your enquiry. We check the bracket before we send the quote.
How to measure your coupler
Not sure which system it is? Three measurements tell us which bracket you need.
- Measure the diameter of both pins.
- Measure the distance between the pin centres.
- Measure the width between the inside faces of the ears.
If the coupler has a make or type printed on it, send that too.
PC750LC-6 at a glance
| Figure | Value | Source |
|---|---|---|
| Max dig depth | 8,450 mm | maker's website (komatsu.eu) |
| Max reach | 13,400 mm | maker's document (komatsu.eu) |
| Max dump height | 8,235 mm | maker's document (komatsu.eu) |
| Arm length | 2,900–3,600 mm | maker's document (komatsu.eu) |
| Main pump flow | 1,008 l/min | maker's document (komatsu.eu) |
| Bucket capacity | 3.6–6 m³ | maker's document (komatsu.eu) |
| Bucket width | 1,750–2,920 mm | maker's document (komatsu.eu) |
| Transport width | 4,110 mm | maker's document (komatsu.eu) |
Only figures the maker publishes for this model. Where a figure is missing, no value is shown.
What the PC750LC-6 figures mean for its attachments
- The main pump delivers up to 1,008 l/min at 313.8 bar. That is the pump output of the whole machine, not the flow an attachment gets.
- It digs down to 8,450 mm. That is the deepest trench it can open.
- Its maximum reach is 13,400 mm.
- It dumps at up to 8,235 mm, so a truck or skip side has to sit below that height.
- Komatsu offers arms from 2,900 to 3,600 mm. A longer arm reaches further, a shorter one handles a heavier bucket.
- Komatsu lists buckets from 1,750 to 2,920 mm wide for this machine. Compare that with the bucket widths in the table above.
- Komatsu lists bucket capacities from 3.6 to 6 m³.
- For transport it measures 13,820 x 4,110 x 4,785 mm (length, width, height).
- Engine power is 331 kW.
Figures as published by Komatsu in its own documents.
How the PC750LC-6 compares with its neighbours
The nearest models by weight, with the difference to the PC750LC-6 in parentheses where both makers publish the figure.
| Model | Operating weight | Max dig depth | Main pump flow |
|---|---|---|---|
| PC750LC-6 | 83.7 t | 8,450 mm | 1,008 l/min |
| Komatsu PC750LC-7 | 80.6 t (-3.1 t) | 8,450 mm | 988 l/min (-20) |
| Komatsu PC800LC-8 | 78.8 t (-4.9 t) | 8,450 mm | 988 l/min (-20) |
| Hitachi ZX890LCH-7 / ZX890LCR-7 | 84.6 t (+0.9 t) | 8,870 mm (+420) | 1,112 l/min (+104) |
Figures as each maker publishes them. A difference is shown only where both machines have a published value.
PC750LC-6: what the brochure names
Features Komatsu names in its own brochure for the PC750LC-6. Some of them may be optional, so check the machine's spec before you order.
- Work modes you select from the cab.
- A load-sensing hydraulic system.
From Komatsu's published brochure. We keep the source document on file.
Questions about the PC750LC-6
- What bucket width fits the PC750LC-6?
- Komatsu lists buckets from 1,750 to 2,920 mm wide for it. Pick a width in that range from the sizes above.
No attachment family in our catalogue is listed above 65 t. For a machine of this weight we make the attachment to order: send us the machine details and our engineers reply with an offer.
Komatsu PC750LC-6: machine data
- Operating weight
- 83,700 kg
- Engine power
- 331 kW
- Maximum digging depth
- 8,450 mm
- Maximum dump height
- 8,235 mm
As published by Komatsu, retrieved 2026-09-17. Source
Before you order: check the interface
The weight class of the Komatsu PC750LC-6 sizes the attachment. It does not tell you the pin diameter, the pin spacing or the stick width, and those decide whether an attachment fits. Measure them on the machine, or send us the measurements of the bucket it runs today.
Heavy excavators dig rock, load trucks and work in quarries, so wear decides the bucket as much as capacity does. Rock and reinforced buckets carry thicker wear steel, teeth and side cutters, and the bucket is sized to the trucks it loads and to the density of the material.
- Measure the diameter of both bucket pins.
- Measure the distance between the pin centres.
- Measure the inside width between the stick ears.
- If the machine runs a quick coupler, note its make and type.
What these terms mean:
Other Komatsu models of a similar weight
Other makes of a similar weight
Operating weight within 2 t of the Komatsu PC750LC-6.
Why buy from the factory
- Cutting, machining, welding and painting on one site, our own factory in Poland, EU
- More than 50,000 attachments delivered since 2008
- A record for every serial number, so the spare parts match your attachment
Need Custom Specifications?
We can manufacture attachments to your exact pin spacing and requirements for Komatsu PC750LC-6.
Welded to EN ISO 3834-2. Agree it as a standing term of supply and the EN 10204 3.1 certificate ships with every attachment. You also get the CE declaration of conformity for every product that carries the CE mark.
Do you sell Komatsu machines? Machine dealer supply
Machine makes and model names belong to their owners. Sieruta is not affiliated with them. We use the names only to show which machines we offer attachments for, by operating weight.