Tools · Rippers & rakes
LRS - short land rakes for mini-excavators
Standard
LRS Land rake short model
Compatible interfaces: S30 · S40 · S45 · S50 · S60 · MS01 · MS03 · MS08 · MS10 · CW00 · CW05 · CW10 +15
- 0.7–15 tons
- On request
- Carriers: Mini, Midi, Standard
The short version of the land rake, for mini-excavators working in tight plots and along boundaries. The reduced width suits small machines, and the rake still pulls out roots and stones and lets the soil fall through.
Dimensions
The letters on the drawing match the columns in the table below.
Dimensions in mm
Typical jobs
The Short/Low Land Rake for Mini-Excavators works in low-clearance areas and levels ground. It is used for:
- Land clearing and site preparation in confined spaces
- Basements, tunnels, and areas with low headroom
- Removing vegetation and debris
- Topsoil raking and material sorting in tight areas
- Tight plots and work along boundaries
Models and specifications
Figures as printed on this family’s datasheet. A dash means the datasheet does not state that figure.
Datasheet (PDF)| Model | Machine class [t] | Width [mm] | Height [mm] | Length [mm] | Number of legs | Spacing [mm] | Leg thickness [mm] | Quick coupler brackets | Weight [kg] |
|---|---|---|---|---|---|---|---|---|---|
| LRS-2 | 0.7–1.5 | 665 | 346 | 275 | 12 | 50 | 15 | S30/150 · MS01 · M02 · HS02 · CW00 · OQ40 · Klac C | 48 |
| LRS-3 | 1.5–2.5 | 925 | 346 | 275 | 15 | 50 | 15 | S30/180 · MS03 · M03 · HS02 · CW05 · OQ40 · Klac C · D | 70 |
| LRS-5 | 2.5–5.0 | 1560 | 346 | 275 | 23 | 50 | 20 | S40 · MS03 · M03 · HS03 · CW05 · OQ40 · Klac D | 130 |
| LRS-7 | 5.0–7.0 | 1980 | 346 | 275 | 29 | 50 | 20 | S40/240 · MS03 · MS08 · M10 · HS06 · CW10 · OQ45 | 155 |
| LRS-15 | 7.0–15 | 1980 | 560 | 390 | 29 | 50 | 30 | S45 · S50 · S60 · MS08 · MS10 · M10 · M18 · HS08 · CW10 · CW20 · SW33 · Klac F | 380 |
→ Scroll the table sideways to see every model.
Compliance, certification & documentation
- EN ISO 3834-2Certified welding qualityCSW/1293/2025
- EN 1090-1 EXC1 + EXC2Factory production control1433-CPR-0257
- EN ISO 9606-1 · WPQR EN ISO 15614Qualified welders and procedures
- EN ISO 9712: VT + PT level 2Non-destructive testingwhere the drawing or inspection plan requires it
- EN 10204 3.1Material traceability
- CE: 2006/42/ECCE markingTransition to Regulation (EU) 2023/1230 underway. Applicable from 20 January 2027.
Warranty
Sieruta covers manufacturing defects in the components it makes itself.
Normal wear, misuse or overloading and unauthorised modifications are not covered. Warranty terms and claims
Request a quote
Tell us your machine and the job. An engineer checks the fit, and we usually reply within 24–48 hours.
More from this family group
Standard
MR - heavy duty excavator multi-ripper
The MR multi-ripper enters the ground on several legs at once and breaks up and loosens compacted material.
On requestView product
Standard
RIP - heavy duty ripper
A single shank made of high-strength steel, with a protector over the shank. It breaks up tough soil, rock and frozen ground, so the material can then be loaded with an ordinary digging bucket.
On requestView product
Standard
DuoRIP - double ripper for root extraction
Two shanks go deep into the ground at once. It rips out root systems, large roots and stumps when land is cleared for a site.
On requestView product
Standard
RC - root cutter
Three sizes, from 13 to 47 kg, each fitting the quick-coupler brackets in its table. It cuts roots on excavators from 0.6 to 10 t.
On requestView product
Standard
RRB - root rake bucket profile
Tines set in a bucket-shaped frame rake out roots and stones, then carry and dump what they collect. Clearing and loading are done in the same pass.
On requestView product
Configured
RRH - root rake with hydraulic clamp
A root rake with a hydraulic top clamp: it pulls out roots and holds them against the tines.
On requestView product
