Buckets · Mini excavator - grading
GB - rigid grading & ditching bucket
Standard
GB Grading & ditching bucket - flat top
Compatible interfaces: S30 · S40 · S45 · S50 · MS01 · MS03 · MS08 · CW00 · CW05 · CW10 · OQ40 · OQ45 +11
- 0.6–10 tons
- On request
- Carriers: Mini, Midi
Part of the German-profile set with GP - general purpose digging bucket, GBH - hydraulic tilt ditching bucket for mini-excavator. Enquire about this set
The GB is a rigid grading and ditching bucket with a flat top for mini and midi excavators. It is used for ditch cleaning, grading, levelling and cutting slopes.
About this family
The Rigid Grading and Ditching Bucket is made for mini-excavators. It is used for ditch maintenance, grading and slope work. It’s available in sizes from 600 mm to 1800 mm, with capacities from 28 dm3 to 334 dm3. It is built from S355JR2 and Hardox® steel, with an HB500 cutting edge. The flat top fits most European mini-excavator quick-coupler systems, and optional wear bars reduce wear on the bucket bottom. A bolt-on cutting edge is available, and the options include suction relief holes for sticky soil and drainage holes.
Six sizes cover machines from 0.6 to 10 t, GB-10 through GB-90, in widths from 600 to 1800 mm. Capacity runs from 28 to 334 litres (SAE) and weight from 22 to 200 kg. The tip radius grows from 238 mm on GB-10 to 479 mm on GB-90.
The body is S355JR2 and Hardox® steel with an HB500 cutting edge, cutting edges on the front sides, an inner reinforcement rib, a flat bottom and roof and a bent section. Options are a reversible HB400 cutting edge, a rear HB500 cutting edge, wear bars on the bottom and HB500 cutting edges on the front sides. On request it gets suction relief holes, so sticky soil drops out instead of holding to the bottom, or drainage holes that let water run out of the load.
The quick coupler bracket follows the size, from S30, MS01, M02 and CW00 on GB-10 up to S45, S50, MS08, M10, HS08, CW10, OQ45 and Klac F on GB-90.
Features
- Six sizes: GB-10 to GB-90 for machines from 0.6 to 10 t
- Widths: 600 to 1800 mm
- Capacity and weight: 28 to 334 l (SAE), 22 to 200 kg
- Tip radius: 238 mm on GB-10 up to 479 mm on GB-90
- Steel: S355JR2 and Hardox® body, HB500 cutting edge
- Frontside cutting edges
- Cutting edge HB500
- Inner reinforcement rib
- Flat bottom & roof
- Bent section
Optional features:
- Reversible cutting edge HB400
- Rear cutting edge HB500
- Wear bars on bottom
Dimensions
Dimensions in mm
Typical jobs
- Cleaning out and reshaping ditches
- Grading and levelling
- Cutting and trimming slopes
- Preparing ground for foundations, paths and driveways
- Backfilling trenches and spreading material
Models and specifications
Figures as printed on this family’s datasheet. A dash means the datasheet does not state that figure.
Datasheet (PDF)Column heads: model and Machine class [t] · each cell: Capacity SAE [dm³] / Weight [kg]
| Width [mm] | GB-100.6–1.2 | GB-201.2–1.8 | GB-301.8–2.5 | GB-402.5–4.0 | GB-604.0–6.0 | GB-906.0–10 |
|---|---|---|---|---|---|---|
| 600 | 28 / 22 | – | – | – | – | – |
| 800 | 39 / 28 | 57 / 39 | – | – | – | – |
| 1000 | 50 / 34 | 72 / 47 | 93 / 70 | 124 / 81 | – | – |
| 1200 | – | 85 / 55 | 114 / 82 | 150 / 94 | 187 / 111 | – |
| 1400 | – | – | – | 176 / 107 | 220 / 127 | – |
| 1500 | – | – | – | – | 236 / 135 | 275 / 170 |
| 1600 | – | – | – | – | 253 / 143 | 295 / 180 |
| 1800 | – | – | – | – | – | 334 / 200 |
| Height [mm] | 237 | 294 | 346 | 390 | 442 | 475 |
| Length [mm] | 289 | 357 | 407 | 446 | 507 | 559 |
| Tip radius [mm] | 238 | 309 | 348 | 400 | 445 | 479 |
| Quick coupler brackets | S30 · MS01 · M02 · CW00 | S30 · MS01 · M02 · HS02 · CW05 · Klac C | S40 · MS03 · M03 · HS02 CW05 · OQ40 · klac C | S40 · MS03 · M03 · HS03 · CW05 · OQ40 · Klac D | S40 · MS03 · M03 · HS06 · CW10 · OQ40 · Klac E | S45 · S50 · MS08 · M10 · HS08 · CW10 · OQ45 · Klac F |
→ Scroll the table sideways to see every model.
Compliance, certification & documentation
- EN ISO 3834-2Certified welding qualityCSW/1293/2025
- EN 1090-1 EXC1 + EXC2Factory production control1433-CPR-0257
- EN ISO 9606-1 · WPQR EN ISO 15614Qualified welders and procedures
- EN ISO 9712: VT + PT level 2Non-destructive testingwhere the drawing or inspection plan requires it
- EN 10204 3.1Material traceability
- CE: 2006/42/ECCE markingTransition to Regulation (EU) 2023/1230 underway. Applicable from 20 January 2027.
- Materials
- Standard: Body: S355JR2 and Hardox®; Cutting edge: HB500
- Options: Reversible cutting edge: HB400; Rear cutting edge: HB500
Warranty
Sieruta covers manufacturing defects in the components it makes itself.
Normal wear, misuse or overloading and unauthorised modifications are not covered. Warranty terms and claims
Request a quote
Tell us your machine and the job. An engineer checks the fit, and we usually reply within 24–48 hours.
More from this family group
Standard
GBH - hydraulic tilt ditching bucket for mini-excavator
Tilts up to 45 degrees to each side, and double pilot check valves hold the angle. Slopes, ditches and banks are shaped without moving the machine.
On requestView product
Standard
GBP - rigid grading & ditching bucket
A rigid grading and ditching bucket with a round inner profile and an HB500 cutting edge. It cleans ditches, grades and cuts slopes on mini and midi excavators.
On requestView product
Standard
GBPH - hydraulic tilting grading & ditching bucket
Tilts 45 degrees to each side, and a double pilot check valve holds the angle. Ditches, slopes and banks are cleaned and shaped without moving the mini-excavator.
On requestView product
Standard
SB mini - Dutch profile grading & ditching bucket for mini-excavator
Dutch profile grading and ditching bucket for mini-excavators. It is used for grading, cleaning ditches and cutting slopes. (slotenbak)
On requestView product
Standard
PS mini - Scandinavian universal grading bucket for mini-excavator
The PS Scandinavian Grading Bucket is made for mini-excavators and for work on a tiltrotator. It is used for fine grading and finishing work. (Planeringsskopa / Planerskovl / Luiskakauha)
On requestView product
Standard
PSH mini - hydraulic swivelling grading bucket for mini-excavators
A cylinder swivels the PS mini bucket, so you set the angle of the cutting edge from the cab. It finishes slopes and verges in tight places while the machine stays where it is. (Planeringsskopa / Planerskovl / Luiskakauha)
On requestView product
