Tools · Rippers & rakes
RRH - root rake with hydraulic clamp
Configured
- On request
A root rake with a hydraulic top clamp: the grab holds brush, roots and demolition debris against the tines so the load can be lifted, carried and placed rather than only pushed.
About this family
Equip your mini or midi excavator for land clearing with the Root Rake with Clamp. It combines root removal with a hydraulic clamp that holds and sorts the debris. It handles stubborn roots with little soil disturbance, for any job that needs thorough ground preparation.
Dimensions
Dimensions in mm
Typical jobs
The Mini & Midi Excavator Root Rake with Clamp is used for:
- Land clearing and site preparation with challenging root systems
- Removing roots, brush, and debris of all sizes
- Precise sorting and control of cleared materials
- Landscaping work that needs roots and stones pulled out with little disturbance around them
- Removing roots while the clamp holds them
Compliance, certification & documentation
- EN ISO 3834-2Certified welding qualityCSW/1293/2025
- EN 1090-1 EXC1 + EXC2Factory production control1433-CPR-0257
- EN ISO 9606-1 · WPQR EN ISO 15614Qualified welders and procedures
- EN ISO 9712: VT + PT level 2Non-destructive testingwhere the drawing or inspection plan requires it
- EN 10204 3.1Material traceability
- CE: 2006/42/ECCE markingTransition to Regulation (EU) 2023/1230 underway. Applicable from 20 January 2027.
Warranty
Sieruta covers manufacturing defects in the components it makes itself.
Normal wear, misuse or overloading and unauthorised modifications are not covered. Warranty terms and claims
Request a quote
Tell us your machine and the job. An engineer checks the fit, and we usually reply within 24–48 hours.
More from this family group
Standard
MR - heavy duty excavator multi-ripper
The MR multi-ripper enters the ground on several legs at once and breaks up and loosens compacted material.
On requestView product
Standard
RIP - heavy duty ripper
A single shank made of high-strength steel, with a protector over the shank. It breaks up tough soil, rock and frozen ground, so the material can then be loaded with an ordinary digging bucket.
On requestView product
Standard
DuoRIP - double ripper for root extraction
Two shanks go deep into the ground at once. It rips out root systems, large roots and stumps when land is cleared for a site.
On requestView product
Standard
RC - root cutter
Three sizes, from 13 to 47 kg, each fitting the quick-coupler brackets in its table. It cuts roots on excavators from 0.6 to 10 t.
On requestView product
Standard
RRB - root rake bucket profile
Tines set in a bucket-shaped frame rake out roots and stones, then carry and dump what they collect. Clearing and loading are done in the same pass.
On requestView product
Standard
LR mini - straight land rakes for mini-excavator
Tines instead of a solid shell pull out roots, brush and stones while the soil falls back through. A plot is cleared before levelling without carting away the topsoil.
On requestView product
