Attachments for the Komatsu PC450LC-8 HRD weight range
Price & dispatch week- We usually reply within 1 working day
- We check the fit before we send the quote
- Every offer names the dispatch week
- If a bracket we made is wrong and does not fit your machine, we replace it.
Catalogue sizes for the PC450LC-8 HRD
Each size below has a catalogue row rated for a carrier of 50,700 – 69,100 kg operating weight. Tell us which sizes you want and we reply with an offer.
On a narrow screen the table scrolls sideways.
| Attachment | Sizes | Capacity [dm³] | Width [mm] | Weight [kg] |
|---|---|---|---|---|
| RIP - heavy duty ripper | Ripper-H | 684 | ||
| QC-S - S-System Scandinavian quick-coupler | QC-S90 | 750 | ||
| CW - CW-System compatible quick-coupler | CW-55 | 660 |
Welded to EN ISO 3834-2. Agree it as a standing term of supply and the EN 10204 3.1 certificate ships with every attachment. You also get the CE declaration of conformity for every product that carries the CE mark.
Message us on WhatsAppPhotos and voice notes are welcome.For publishers: cite or embed this table
Cite this table as https://sieruta.com/en/fit/komatsu/komatsu-pc450lc-8-hrd, figures as of 2026-09-10.
Embed this table on your site
Copy the HTML below into your page. It keeps the link back to this page and the date of the figures.
Sizes are matched to the published operating weight of the PC450LC-8 HRD.
- Weight Class
- Heavy Excavator (30–65 t) · Above 65 t: custom build
- Operating Weight
- 50,700 – 69,100 kg
- Family-owned group, founded in 1996
- More than 50,000 attachments delivered
- Built in our own factory in Poland
Operating weight as published by Komatsu, retrieved 2026-09-10. Source
Which coupler is on your machine?
Pick the system on your machine and we put it in your enquiry. We check the bracket before we send the quote.
How to measure your coupler
Not sure which system it is? Three measurements tell us which bracket you need.
- Measure the diameter of both pins.
- Measure the distance between the pin centres.
- Measure the width between the inside faces of the ears.
If the coupler has a make or type printed on it, send that too.
What the PC450LC-8 HRD figures mean for its attachments
- Engine power is 263 kW.
Figures as published by Komatsu in its own documents.
How the PC450LC-8 HRD compares with its neighbours
The nearest models by weight, with the difference to the PC450LC-8 HRD in parentheses where both makers publish the figure.
| Model | Operating weight |
|---|---|
| PC450LC-8 HRD | 50.7 t |
| Komatsu PC450LCD-7 | 48.3 t (-2.4 t) |
| Komatsu PC490LC-10 Demolition | 47.7 t (-3 t) |
| Hyundai HX480A L | 50.69 t (-0.01 t) |
Figures as each maker publishes them. A difference is shown only where both machines have a published value.
Special machine configuration (Demolition). Engineering review is required before you select an attachment. The families below are matched by operating weight only.
Get a priceEach family shows its candidate models by operating-weight range.
Komatsu PC450LC-8 HRD: machine data
- Operating weight
- 50,700 – 69,100 kg
- Engine power
- 263 kW
As published by Komatsu, retrieved 2026-09-17. Source
Before you order: check the interface
The weight class of the Komatsu PC450LC-8 HRD sizes the attachment. It does not tell you the pin diameter, the pin spacing or the stick width, and those decide whether an attachment fits. Measure them on the machine, or send us the measurements of the bucket it runs today.
Heavy excavators dig rock, load trucks and work in quarries, so wear decides the bucket as much as capacity does. Rock and reinforced buckets carry thicker wear steel, teeth and side cutters, and the bucket is sized to the trucks it loads and to the density of the material.
Quick coupler brackets at this weight
In our model tables, the attachments listed for the Komatsu PC450LC-8 HRD at its weight are built with these brackets. Each code opens the models that list it.
- Measure the diameter of both bucket pins.
- Measure the distance between the pin centres.
- Measure the inside width between the stick ears.
- If the machine runs a quick coupler, note its make and type.
What these terms mean:
How to choose an attachment for the job:
Other makes of a similar weight
Operating weight within 2 t of the Komatsu PC450LC-8 HRD.
Other Komatsu models with the same coupler brackets
Our model tables give these machines the same quick coupler brackets.
Why buy from the factory
- Cutting, machining, welding and painting on one site, our own factory in Poland, EU
- More than 50,000 attachments delivered since 2008
- A record for every serial number, so the spare parts match your attachment
Need Custom Specifications?
We can manufacture attachments to your exact pin spacing and requirements for Komatsu PC450LC-8 HRD.
Welded to EN ISO 3834-2. Agree it as a standing term of supply and the EN 10204 3.1 certificate ships with every attachment. You also get the CE declaration of conformity for every product that carries the CE mark.
Do you sell Komatsu machines? Machine dealer supply
Machine makes and model names belong to their owners. Sieruta is not affiliated with them. We use the names only to show which machines we offer attachments for, by operating weight.