Attachments for the Liebherr R 952 Litronic weight range
Weight Class: Heavy Excavator (30–65 t) Operating Weight: 51,110 – 58,930 kg
Price & lead time Get price & lead time- We usually reply within 1 working day
- We check the fit before we send the quote
- Every offer names the dispatch week
- If a bracket we made is wrong and does not fit your machine, we replace it.
How is the attachment mounted on this machine?
Tell us what is on the machine now. It narrows the sizes we show and goes with your enquiry. It does not confirm fit: we check the bracket before we send the quote.
Ask for a price with this answer
The short version for the R 952 Litronic
Families to look at first
- RIP - heavy duty ripper
- QC-S - S-System Scandinavian quick-coupler
- CW - CW-System compatible quick-coupler
Quick coupler brackets at this weight
- S90
- CW55
- OQ90
- SW66
Brackets we build attachments with in this weight range. Not a confirmed fit.
Still to check
Pin diameter, pin spacing, inside width between the stick ears, and any quick coupler on the machine.
Catalogue sizes for the R 952 Litronic
Each size below has a catalogue row rated for a carrier of 51,110 – 58,930 kg operating weight. Tell us which sizes you want and we reply with an offer.
Each family shows its candidate models by operating-weight range.
The attachments buyers in your market ask for first, sized for the R 952 Litronic.
On a narrow screen the table scrolls sideways.
Tools
| Attachment | Sizes | Heaped capacity ISO 7451 [dm³] | Width [mm] | Weight [kg] |
|---|---|---|---|---|
Non-bucket attachments | ||||
| RIP - heavy duty ripper | Ripper-H | 684 | ||
Quick couplers
Coupler sizes within this machine's published weight range. Not a confirmed fit.
| Attachment | Sizes | Heaped capacity ISO 7451 [dm³] | Width [mm] | Weight [kg] |
|---|---|---|---|---|
| QC-S - S-System Scandinavian quick-coupler Start here Price & lead time Get price & lead time S-System (Scandinavian) | QC-S90 | 750 | ||
| CW - CW-System compatible quick-coupler CW-System | CW-55 | 660 |
Welded to EN ISO 3834-2. Agree it as a standing term of supply and the EN 10204 3.1 certificate ships with every attachment. You also get the CE declaration of conformity for every quick coupler and hydraulic attachment. See the certificates.
Message us on WhatsApp Photos and voice notes are welcome.Before you order: check the interface
The weight class of the Liebherr R 952 Litronic sizes the attachment. It does not tell you the pin diameter, the pin spacing or the stick width, and those decide whether an attachment fits. Measure them on the machine, or send us the measurements of the bucket it runs today.
Heavy excavators dig rock, load trucks and work in quarries, so wear decides the bucket as much as capacity does. Rock and reinforced buckets carry thicker wear steel, teeth and side cutters, and the bucket is sized to the trucks it loads and to the density of the material.DBS - engineered rock bucket for excavator
Quick coupler brackets at this weight
In our model tables, the attachments listed for the Liebherr R 952 Litronic at its weight are built with these brackets. Each code opens the models that list it.
Brackets we build attachments with in this weight range. Not a confirmed fit.
- Measure the diameter of both bucket pins.
- Measure the distance between the pin centres.
- Measure the inside width between the stick ears.
- If the machine runs a quick coupler, note its make and type.
What these terms mean:
How to choose an attachment for the job:
Sizes are matched to the published operating weight of the R 952 Litronic.
- Weight Class
- Heavy Excavator (30–65 t)
- Operating Weight
- 51,110 – 58,930 kg
- Family-owned group, founded in 1996
- More than 50,000 attachments delivered
- Built in our own factory in Poland
Operating weight as published by Liebherr, retrieved 2026-09-10. Source
Liebherr R 952 Litronic: machine data
- Operating weight
- 51,110 – 58,930 kg
- Engine power
- 300 kW
- Maximum digging depth
- 13,960 mm
- Maximum dump height
- 13,810 mm
- Bucket breakout force
- 323 kN
- Arm crowd force
- 261 kN
- Quick coupler
- SWA 77
- Max reach
- 19,680 mm maker's document (assets-cdn.liebherr.com)
- Arm length
- 2,500–8,550 mm maker's document (assets-cdn.liebherr.com)
- Main pump flow
- 760 l/min maker's document (assets-cdn.liebherr.com)
- Bucket capacity
- 2–3.7 m³ maker's document (assets-cdn.liebherr.com)
- Bucket width
- 1,500–2,150 mm maker's document (assets-cdn.liebherr.com)
- Lift capacity
- 18,000 kg maker's document (assets-cdn.liebherr.com)
- Transport width
- 3,500 mm maker's document (assets-cdn.liebherr.com)
As published by Liebherr, retrieved 2026-09-17. Source
What the R 952 Litronic figures mean for its attachments
- The main pump delivers up to 760 l/min at 380 bar. That is the pump output of the whole machine, not the flow an attachment gets.
- Liebherr lists this quick coupler for it: SWA 77. The bracket on every attachment has to match the coupler.
- It digs down to 13,960 mm. That is the deepest trench it can open.
- Its maximum reach is 19,680 mm.
- It dumps at up to 13,810 mm, so a truck or skip side has to sit below that height.
- Liebherr offers arms from 2,500 to 8,550 mm. A longer arm reaches further, a shorter one handles a heavier bucket.
- Liebherr lists buckets from 1,500 to 2,150 mm wide for this machine.
- Liebherr lists bucket capacities from 2 to 3.7 m³.
- Bucket breakout force is 323 kN and arm crowd force 261 kN. That is the force a bucket or ripper works with at the tooth.
- Liebherr gives a lifting capacity of 18,000 kg. Check a heavy grab or hammer, plus its load, against the full load chart.
- For transport it measures 12,400 x 3,500 x 3,800 mm (length, width, height).
- Engine power is 300 kW.
Figures as published by Liebherr in its own documents.
How the R 952 Litronic compares with its neighbours
The nearest models by weight, with the difference to the R 952 Litronic in parentheses where both makers publish the figure.
| Model | Operating weight | Max dig depth | Main pump flow |
|---|---|---|---|
| R 952 Litronic | 51.11 t | 13,960 mm | 760 l/min |
| Liebherr R 950 Demolition Litronic | 53.1 t (+1.99 t) | 6,100 mm (-7,860) | 610 l/min (-150) |
| Liebherr R 940 Demolition Litronic | 48.7 t (-2.41 t) | 5,650 mm (-8,310) | 630 l/min (-130) |
| Kobelco SK500XDLC-10 | 51.2 t (+0.09 t) | 7,360 mm (-6,600) | 740 l/min (-20) |
Figures as each maker publishes them. A difference is shown only where both machines have a published value.
R 952 Litronic: what the brochure names
Features Liebherr names in its own brochure for the R 952 Litronic. Some of them may be optional, so check the machine's spec before you order.
- Operator protection certified to ROPS and FOPS.
- An engine that meets EU Stage V.
- Proportional control of the auxiliary hydraulics, for tilt buckets, augers and breakers.
From Liebherr's published brochure. We keep the source document on file.
Other makes of a similar weight
Operating weight within 2 t of the Liebherr R 952 Litronic.
Other Liebherr models with the same coupler brackets
Our model tables give these machines the same quick coupler brackets.
Why buy from the factory
- Cutting, machining, welding and painting on one site, our own factory in Poland, EU
- More than 50,000 attachments delivered since 2008
- A record for every serial number, so the spare parts match your attachment
Need Custom Specifications?
We can manufacture attachments to your exact pin spacing and requirements for Liebherr R 952 Litronic.
Questions about the R 952 Litronic
- What bucket width fits the R 952 Litronic?
- Liebherr lists buckets from 1,500 to 2,150 mm wide for it. Pick a width in that range.
- Which quick coupler is installed on your R 952 Litronic?
- Liebherr lists this coupler for it: SWA 77. Order attachments with the matching bracket.
For publishers: cite or embed this table
Cite this table as https://sieruta.com/en/fit/liebherr/liebherr-r-952-litronic, figures as of 2026-09-10.
Embed this table on your site
Copy the HTML below into your page. It keeps the link back to this page and the date of the figures.
Do you sell Liebherr machines? Machine dealer supply
Machine makes and model names belong to their owners. Sieruta is not affiliated with them. We use the names only to show which machines we offer attachments for, by operating weight.