Attachments for the Liebherr R 945 SME Litronic weight range
- Bucket line
- DB - heavy duty digging bucket1400–1800 mm wide
- We usually reply within 1 working day
- We check the fit before we send the quote
- Every offer names the dispatch week
- If a bracket we made is wrong and does not fit your machine, we replace it.
Catalogue sizes for the R 945 SME Litronic
Each size below has a catalogue row rated for a carrier of 47,250 – 47,350 kg operating weight. Tell us which sizes you want and we reply with an offer.
On a narrow screen the table scrolls sideways.
| Attachment | Sizes | Capacity [dm³] | Width [mm] | Weight [kg] |
|---|---|---|---|---|
| DB - heavy duty digging bucket | DB-500 · 4 width variants | 1,988–2,755 SAE | 1,400–1,800 | 1,515–1,829 |
| SDB - heavy duty skeleton DB bucket | SDB-500 · 2 width variants | 2,622–3,000 SAE | 1,800–2,000 | 1,995–2,172 |
| DBF - flat-top digging bucket for quick coupler | DBF-500 · 4 width variants | 1,897–2,611 SAE | 1,400–1,800 | 1,470–1,765 |
| RDBF - flat-top skeleton DBF bucket on rods | RDBF-500 · 3 width variants | 2,241–2,999 SAE | 1,600–2,000 | 1,511–1,755 |
| RIP - heavy duty ripper | Ripper-H | 684 | ||
| QC-S - S-System Scandinavian quick-coupler | QC-S90 | 750 | ||
| CW - CW-System compatible quick-coupler | CW-55 | 660 |
Welded to EN ISO 3834-2. Agree it as a standing term of supply and the EN 10204 3.1 certificate ships with every attachment. You also get the CE declaration of conformity for every product that carries the CE mark.
Message us on WhatsAppPhotos and voice notes are welcome.For publishers: cite or embed this table
Cite this table as https://sieruta.com/en/fit/liebherr/liebherr-r-945-sme-litronic, figures as of 2026-09-10.
Embed this table on your site
Copy the HTML below into your page. It keeps the link back to this page and the date of the figures.
Sizes are matched to the published operating weight of the R 945 SME Litronic.
- Weight Class
- Heavy Excavator (30–65 t)
- Operating Weight
- 47,250 – 47,350 kg
- Family-owned group, founded in 1996
- More than 50,000 attachments delivered
- Built in our own factory in Poland
Operating weight as published by Liebherr, retrieved 2026-09-10. Source
Start here
The attachments buyers in your market ask for first, sized for the R 945 SME Litronic.
Which coupler is on your machine?
Pick the system on your machine and we put it in your enquiry. We check the bracket before we send the quote.
How to measure your coupler
Not sure which system it is? Three measurements tell us which bracket you need.
- Measure the diameter of both pins.
- Measure the distance between the pin centres.
- Measure the width between the inside faces of the ears.
If the coupler has a make or type printed on it, send that too.
Send me the spec sheet for my machine
Pick a bucket line and we email you its spec sheet, with the sizes we build for the R 945 SME Litronic.
Send this answer to a colleague or dealer
Liebherr R 945 SME Litronic: DBF - flat-top digging bucket for quick coupler (DBF-500)
R 945 SME Litronic at a glance
| Figure | Value | Source |
|---|---|---|
| Max dig depth | 6,840 mm | maker's document (assets-cdn.liebherr.com) |
| Max reach | 10,570 mm | maker's document (assets-cdn.liebherr.com) |
| Max dump height | 6,850 mm | maker's document (assets-cdn.liebherr.com) |
| Arm length | 2,600 mm | maker's document (assets-cdn.liebherr.com) |
| Main pump flow | 630 l/min | maker's document (assets-cdn.liebherr.com) |
| Bucket capacity | 2–3 m³ | maker's document (assets-cdn.liebherr.com) |
| Bucket width | 1,600–1,850 mm | maker's document (assets-cdn.liebherr.com) |
| Lift capacity | 19,200 kg | maker's document (assets-cdn.liebherr.com) |
| Quick coupler | SWA 66 | maker's document (assets-cdn.liebherr.com) |
| Transport width | 3,490 mm | maker's document (assets-cdn.liebherr.com) |
Only figures the maker publishes for this model. Where a figure is missing, no value is shown.
What the R 945 SME Litronic figures mean for its attachments
- The main pump delivers up to 630 l/min at 380 bar. That is the pump output of the whole machine, not the flow an attachment gets.
- Liebherr lists this quick coupler for it: SWA 66. The bracket on every attachment has to match the coupler.
- It digs down to 6,840 mm. That is the deepest trench it can open.
- Its maximum reach is 10,570 mm.
- It dumps at up to 6,850 mm, so a truck or skip side has to sit below that height.
- Its arm is 2,600 mm long.
- Liebherr lists buckets from 1,600 to 1,850 mm wide for this machine. Compare that with the bucket widths in the table above.Our sizes in that range: DB - heavy duty digging bucket (DB-500); SDB - heavy duty skeleton DB bucket (SDB-500); DBF - flat-top digging bucket for quick coupler (DBF-500); RDBF - flat-top skeleton DBF bucket on rods (RDBF-500)
- Liebherr lists bucket capacities from 2 to 3 m³.
- Liebherr gives a lifting capacity of 19,200 kg. Check a heavy grab or hammer, plus its load, against the full load chart.
- For transport it measures 11,200 x 3,490 x 3,750 mm (length, width, height).
- Engine power is 220 kW.
Figures as published by Liebherr in its own documents.
How the R 945 SME Litronic compares with its neighbours
The nearest models by weight, with the difference to the R 945 SME Litronic in parentheses where both makers publish the figure.
| Model | Operating weight | Max dig depth | Main pump flow |
|---|---|---|---|
| R 945 SME Litronic | 47.25 t | 6,840 mm | 630 l/min |
| Liebherr R 948 Litronic | 48.6 t (+1.35 t) | 8,910 mm (+2,070) | 760 l/min (+130) |
| Liebherr R 940 Demolition Litronic | 48.7 t (+1.45 t) | 5,650 mm (-1,190) | 630 l/min |
| Komatsu PC490LC-10 Demolition | 47.7 t (+0.45 t) | not published | not published |
Figures as each maker publishes them. A difference is shown only where both machines have a published value.
Questions about the R 945 SME Litronic
- What bucket width fits the R 945 SME Litronic?
- Liebherr lists buckets from 1,600 to 1,850 mm wide for it. Pick a width in that range from the sizes above.
- Which quick coupler is installed on your R 945 SME Litronic?
- Liebherr lists this coupler for it: SWA 66. Order attachments with the matching bracket.
Each family shows its candidate models by operating-weight range.
Digging & sorting buckets
- DB - heavy duty digging bucket
DB-500 · 4 width variants
- SDB - heavy duty skeleton DB bucket
SDB-500 · 2 width variants
- DBF - flat-top digging bucket for quick coupler
DBF-500 · 4 width variants
- RDBF - flat-top skeleton DBF bucket on rods
RDBF-500 · 3 width variants
Liebherr R 945 SME Litronic: machine data
- Operating weight
- 47,250 – 47,350 kg
- Engine power
- 220 kW
- Maximum digging depth
- 6,840 mm
- Maximum dump height
- 6,850 mm
- Quick coupler
- SWA 66
As published by Liebherr, retrieved 2026-09-17. Source
Before you order: check the interface
The weight class of the Liebherr R 945 SME Litronic sizes the attachment. It does not tell you the pin diameter, the pin spacing or the stick width, and those decide whether an attachment fits. Measure them on the machine, or send us the measurements of the bucket it runs today.
Heavy excavators dig rock, load trucks and work in quarries, so wear decides the bucket as much as capacity does. Rock and reinforced buckets carry thicker wear steel, teeth and side cutters, and the bucket is sized to the trucks it loads and to the density of the material.
Quick coupler brackets at this weight
In our model tables, the attachments listed for the Liebherr R 945 SME Litronic at its weight are built with these brackets. Each code opens the models that list it.
- Measure the diameter of both bucket pins.
- Measure the distance between the pin centres.
- Measure the inside width between the stick ears.
- If the machine runs a quick coupler, note its make and type.
What these terms mean:
How to choose an attachment for the job:
Other makes of a similar weight
Operating weight within 2 t of the Liebherr R 945 SME Litronic.
Other Liebherr models with the same coupler brackets
Our model tables give these machines the same quick coupler brackets.
Why buy from the factory
- Cutting, machining, welding and painting on one site, our own factory in Poland, EU
- More than 50,000 attachments delivered since 2008
- A record for every serial number, so the spare parts match your attachment
Need Custom Specifications?
We can manufacture attachments to your exact pin spacing and requirements for Liebherr R 945 SME Litronic.
Welded to EN ISO 3834-2. Agree it as a standing term of supply and the EN 10204 3.1 certificate ships with every attachment. You also get the CE declaration of conformity for every product that carries the CE mark.
Do you sell Liebherr machines? Machine dealer supply
Machine makes and model names belong to their owners. Sieruta is not affiliated with them. We use the names only to show which machines we offer attachments for, by operating weight.