Attachments for the Liebherr R 950 Demolition Litronic weight range
Price & lead timeGet price & lead time- We usually reply within 1 working day
- We check the fit before we send the quote
- Every offer names the dispatch week
- If a bracket we made is wrong and does not fit your machine, we replace it.
How is the attachment mounted on this machine?
Tell us what is on the machine now. It narrows the sizes we show and goes with your enquiry. It does not confirm fit: we check the bracket before we send the quote.
Catalogue sizes for the R 950 Demolition Litronic
Each size below has a catalogue row rated for a carrier of 53,100 – 75,850 kg operating weight. Tell us which sizes you want and we reply with an offer.
Each family shows its candidate models by operating-weight range.
The attachments buyers in your market ask for first, sized for the R 950 Demolition Litronic.
On a narrow screen the table scrolls sideways.
Tools
| Attachment | Sizes | Heaped capacity ISO 7451 [dm³] | Width [mm] | Weight [kg] |
|---|---|---|---|---|
Non-bucket attachments | ||||
| RIP - heavy duty ripper | Ripper-H | 684 | ||
Quick couplers
| Attachment | Sizes | Heaped capacity ISO 7451 [dm³] | Width [mm] | Weight [kg] |
|---|---|---|---|---|
| QC-S - S-System Scandinavian quick-couplerStart herePrice & lead timeGet price & lead timeS-System (Scandinavian) | QC-S90 | 750 | ||
| CW - CW-System compatible quick-couplerCW-System | CW-55 | 660 |
Welded to EN ISO 3834-2. Agree it as a standing term of supply and the EN 10204 3.1 certificate ships with every attachment. You also get the CE declaration of conformity for every attachment. See the certificates.
Message us on WhatsAppPhotos and voice notes are welcome.Special machine configuration (Demolition). Engineering review is required before you select an attachment. Any families shown here are matched by operating weight only.
Price & lead timeGet price & lead timeWhich coupler is on your machine?
Pick the system on your machine and we put it in your enquiry. We check the bracket before we send the quote.
How to measure your coupler
Not sure which system it is? Three measurements tell us which bracket you need.
- Measure the diameter of both pins.
- Measure the distance between the pin centres.
- Measure the width between the inside faces of the ears.
If the coupler has a make or type printed on it, send that too.
Before you order: check the interface
The weight class of the Liebherr R 950 Demolition Litronic sizes the attachment. It does not tell you the pin diameter, the pin spacing or the stick width, and those decide whether an attachment fits. Measure them on the machine, or send us the measurements of the bucket it runs today.
Heavy excavators dig rock, load trucks and work in quarries, so wear decides the bucket as much as capacity does. Rock and reinforced buckets carry thicker wear steel, teeth and side cutters, and the bucket is sized to the trucks it loads and to the density of the material.DBS - engineered rock bucket for excavator
Quick coupler brackets at this weight
In our model tables, the attachments listed for the Liebherr R 950 Demolition Litronic at its weight are built with these brackets. Each code opens the models that list it.
- Measure the diameter of both bucket pins.
- Measure the distance between the pin centres.
- Measure the inside width between the stick ears.
- If the machine runs a quick coupler, note its make and type.
What these terms mean:
How to choose an attachment for the job:
Sizes are matched to the published operating weight of the R 950 Demolition Litronic.
- Weight Class
- Heavy Excavator (30–65 t) · Above 65 t: custom build
- Operating Weight
- 53,100 – 75,850 kg
- Family-owned group, founded in 1996
- More than 50,000 attachments delivered
- Built in our own factory in Poland
Operating weight as published by Liebherr, retrieved 2026-09-10. Source
Liebherr R 950 Demolition Litronic: machine data
- Operating weight
- 53,100 – 75,850 kg
- Engine power
- 220 kW
- Maximum digging depth
- 6,100 mm
- Maximum dump height
- 10,500 mm
- Bucket breakout force
- 237 kN
- Arm crowd force
- 229 kN
- Quick coupler
- SWA 66
- Auxiliary circuit flow
- 305 l/min
- Auxiliary circuit pressure
- 380 bar
- Max reach
- 12,350 mmmaker's document (assets-cdn.liebherr.com)
- Arm length
- 2,100–2,600 mmmaker's document (assets-cdn.liebherr.com)
- Main pump flow
- 610 l/minmaker's document (assets-cdn.liebherr.com)
- Bucket capacity
- 1.25–2.5 m³maker's document (assets-cdn.liebherr.com)
- Bucket width
- 1,350–1,850 mmmaker's document (assets-cdn.liebherr.com)
- Lift capacity
- 19,200 kgmaker's document (assets-cdn.liebherr.com)
As published by Liebherr, retrieved 2026-09-17. Source
What the R 950 Demolition Litronic figures mean for its attachments
- Its auxiliary circuit is rated at 305 l/min and 380 bar. A breaker, auger, tilt rotator or other hydraulic tool states the oil flow it needs, so choose one whose range includes this figure.
- The main pump delivers up to 610 l/min at 380 bar. That is the pump output of the whole machine, not the flow an attachment gets.
- Liebherr lists this quick coupler for it: SWA 66. The bracket on every attachment has to match the coupler.
- It digs down to 6,100 mm. That is the deepest trench it can open.
- Its maximum reach is 12,350 mm.
- It dumps at up to 10,500 mm, so a truck or skip side has to sit below that height.
- Liebherr offers arms from 2,100 to 2,600 mm. A longer arm reaches further, a shorter one handles a heavier bucket.
- Liebherr lists buckets from 1,350 to 1,850 mm wide for this machine.
- Liebherr lists bucket capacities from 1.25 to 2.5 m³.
- Bucket breakout force is 237 kN and arm crowd force 229 kN. That is the force a bucket or ripper works with at the tooth.
- Liebherr gives a lifting capacity of 19,200 kg. Check a heavy grab or hammer, plus its load, against the full load chart.
- Engine power is 220 kW.
Figures as published by Liebherr in its own documents.
How the R 950 Demolition Litronic compares with its neighbours
The nearest models by weight, with the difference to the R 950 Demolition Litronic in parentheses where both makers publish the figure.
| Model | Operating weight | Max dig depth | Main pump flow |
|---|---|---|---|
| R 950 Demolition Litronic | 53.1 t | 6,100 mm | 610 l/min |
| Liebherr R 952 Litronic | 51.11 t (-1.99 t) | 13,960 mm (+7,860) | 760 l/min (+150) |
| Liebherr R 958 Litronic | 57.1 t (+4 t) | 7,350 mm (+1,250) | 760 l/min (+150) |
| Volvo EC530E | 53.14 t (+0.04 t) | 7,690 mm (+1,590) | 832 l/min (+222) |
Figures as each maker publishes them. A difference is shown only where both machines have a published value.
R 950 Demolition Litronic: what the brochure names
Features Liebherr names in its own brochure for the R 950 Demolition Litronic. Some of them may be optional, so check the machine's spec before you order.
- An engine that meets EU Stage V.
- Proportional control of the auxiliary hydraulics, for tilt buckets, augers and breakers.
- A rear or side view camera.
From Liebherr's published brochure. We keep the source document on file.
Other makes of a similar weight
Operating weight within 2 t of the Liebherr R 950 Demolition Litronic.
Other Liebherr models with the same coupler brackets
Our model tables give these machines the same quick coupler brackets.
Why buy from the factory
- Cutting, machining, welding and painting on one site, our own factory in Poland, EU
- More than 50,000 attachments delivered since 2008
- A record for every serial number, so the spare parts match your attachment
Need Custom Specifications?
We can manufacture attachments to your exact pin spacing and requirements for Liebherr R 950 Demolition Litronic.
Questions about the R 950 Demolition Litronic
- What bucket width fits the R 950 Demolition Litronic?
- Liebherr lists buckets from 1,350 to 1,850 mm wide for it. Pick a width in that range.
- Which quick coupler is installed on your R 950 Demolition Litronic?
- Liebherr lists this coupler for it: SWA 66. Order attachments with the matching bracket.
- Can the R 950 Demolition Litronic run a hydraulic attachment?
- Yes, if the tool's rated range covers the auxiliary circuit: 305 l/min at 380 bar.
For publishers: cite or embed this table
Cite this table as https://sieruta.com/en/fit/liebherr/liebherr-r-950-demolition-litronic, figures as of 2026-09-10.
Embed this table on your site
Copy the HTML below into your page. It keeps the link back to this page and the date of the figures.
Do you sell Liebherr machines? Machine dealer supply
Machine makes and model names belong to their owners. Sieruta is not affiliated with them. We use the names only to show which machines we offer attachments for, by operating weight.