Attachments for the Hitachi ZX530LCH-7 weight range
Price & lead timeGet price & lead time- We usually reply within 1 working day
- We check the fit before we send the quote
- Every offer names the dispatch week
- If a bracket we made is wrong and does not fit your machine, we replace it.
How is the attachment mounted on this machine?
Tell us what is on the machine now. It narrows the sizes we show and goes with your enquiry. It does not confirm fit: we check the bracket before we send the quote.
Catalogue sizes for the ZX530LCH-7
Each size below has a catalogue row rated for a carrier of 52,700 – 54,600 kg operating weight. Tell us which sizes you want and we reply with an offer.
Each family shows its candidate models by operating-weight range.
The attachments buyers in your market ask for first, sized for the ZX530LCH-7.
On a narrow screen the table scrolls sideways.
Tools
| Attachment | Sizes | Heaped capacity ISO 7451 [dm³] | Width [mm] | Weight [kg] |
|---|---|---|---|---|
Non-bucket attachments | ||||
| RIP - heavy duty ripper | Ripper-H | 684 | ||
Quick couplers
| Attachment | Sizes | Heaped capacity ISO 7451 [dm³] | Width [mm] | Weight [kg] |
|---|---|---|---|---|
| QC-S - S-System Scandinavian quick-couplerStart herePrice & lead timeGet price & lead timeS-System (Scandinavian) | QC-S90 | 750 | ||
| CW - CW-System compatible quick-couplerCW-System | CW-55 | 660 |
Welded to EN ISO 3834-2. Agree it as a standing term of supply and the EN 10204 3.1 certificate ships with every attachment. You also get the CE declaration of conformity for every attachment. See the certificates.
Message us on WhatsAppPhotos and voice notes are welcome.Which coupler is on your machine?
Pick the system on your machine and we put it in your enquiry. We check the bracket before we send the quote.
How to measure your coupler
Not sure which system it is? Three measurements tell us which bracket you need.
- Measure the diameter of both pins.
- Measure the distance between the pin centres.
- Measure the width between the inside faces of the ears.
If the coupler has a make or type printed on it, send that too.
Before you order: check the interface
The weight class of the Hitachi ZX530LCH-7 sizes the attachment. It does not tell you the pin diameter, the pin spacing or the stick width, and those decide whether an attachment fits. Measure them on the machine, or send us the measurements of the bucket it runs today.
Heavy excavators dig rock, load trucks and work in quarries, so wear decides the bucket as much as capacity does. Rock and reinforced buckets carry thicker wear steel, teeth and side cutters, and the bucket is sized to the trucks it loads and to the density of the material.DBS - engineered rock bucket for excavator
Quick coupler brackets at this weight
In our model tables, the attachments listed for the Hitachi ZX530LCH-7 at its weight are built with these brackets. Each code opens the models that list it.
- Measure the diameter of both bucket pins.
- Measure the distance between the pin centres.
- Measure the inside width between the stick ears.
- If the machine runs a quick coupler, note its make and type.
What these terms mean:
How to choose an attachment for the job:
Sizes are matched to the published operating weight of the ZX530LCH-7.
- Weight Class
- Heavy Excavator (30–65 t)
- Operating Weight
- 52,700 – 54,600 kg
- Family-owned group, founded in 1996
- More than 50,000 attachments delivered
- Built in our own factory in Poland
Operating weight as published by Hitachi, retrieved 2026-09-10. Source
Hitachi ZX530LCH-7: machine data
- Operating weight
- 52,700 – 54,600 kg
- Engine power
- 296 kW
- Maximum digging depth
- 7,690 mm
- Maximum dump height
- 7,730 mm
- Max reach
- 11,820 mmmaker's document (hitachicm.com)
- Arm length
- 2,500–3,400 mmmaker's document (hitachicm.com)
- Main pump flow
- 770 l/minmaker's document (hitachicm.com)
- Bucket capacity
- 2.1–2.5 m³maker's document (hitachicm.com)
- Bucket width
- 1,560–1,820 mmmaker's document (hitachicm.com)
- Lift capacity
- 18,370 kgmaker's document (hitachicm.com)
- Transport width
- 3,840 mmmaker's document (hitachicm.com)
As published by Hitachi, retrieved 2026-09-19. Source
What the ZX530LCH-7 figures mean for its attachments
- The main pump delivers up to 770 l/min at 319 bar. That is the pump output of the whole machine, not the flow an attachment gets.
- It digs down to 7,690 mm. That is the deepest trench it can open.
- Its maximum reach is 11,820 mm.
- It dumps at up to 7,730 mm, so a truck or skip side has to sit below that height.
- Hitachi offers arms from 2,500 to 3,400 mm. A longer arm reaches further, a shorter one handles a heavier bucket.
- Hitachi lists buckets from 1,560 to 1,820 mm wide for this machine.
- Hitachi lists bucket capacities from 2.1 to 2.5 m³.
- Hitachi gives a lifting capacity of 18,370 kg. Check a heavy grab or hammer, plus its load, against the full load chart.
- For transport it measures 12,010 x 3,840 x 3,760 mm (length, width, height).
- Engine power is 296 kW.
Figures as published by Hitachi in its own documents.
How the ZX530LCH-7 compares with its neighbours
The nearest models by weight, with the difference to the ZX530LCH-7 in parentheses where both makers publish the figure.
| Model | Operating weight | Max dig depth | Main pump flow |
|---|---|---|---|
| ZX530LCH-7 | 52.7 t | 7,690 mm | 770 l/min |
| Hitachi ZX490-7 SLF | 51.5 t (-1.2 t) | 11,910 mm (+4,220) | 770 l/min |
| Hitachi ZX490LCH-7 | 49.5 t (-3.2 t) | 7,700 mm (+10) | 770 l/min |
| Develon DX530LC-7K | 52.9 t (+0.2 t) | 8,405 mm (+715) | 780 l/min (+10) |
Figures as each maker publishes them. A difference is shown only where both machines have a published value.
ZX530LCH-7: what the brochure names
Features Hitachi names in its own brochure for the ZX530LCH-7. Some of them may be optional, so check the machine's spec before you order.
- An engine that meets EU Stage V.
- Telematics for tracking the machine remotely (ConSite).
- Operator protection certified to ROPS and FOPS.
- Work modes you select from the cab.
From Hitachi's published brochure. We keep the source document on file.
Other makes of a similar weight
Operating weight within 2 t of the Hitachi ZX530LCH-7.
Other Hitachi models with the same coupler brackets
Our model tables give these machines the same quick coupler brackets.
Why buy from the factory
- Cutting, machining, welding and painting on one site, our own factory in Poland, EU
- More than 50,000 attachments delivered since 2008
- A record for every serial number, so the spare parts match your attachment
Need Custom Specifications?
We can manufacture attachments to your exact pin spacing and requirements for Hitachi ZX530LCH-7.
Questions about the ZX530LCH-7
- What bucket width fits the ZX530LCH-7?
- Hitachi lists buckets from 1,560 to 1,820 mm wide for it. Pick a width in that range.
For publishers: cite or embed this table
Cite this table as https://sieruta.com/en/fit/hitachi/hitachi-zx530lch-7, figures as of 2026-09-10.
Embed this table on your site
Copy the HTML below into your page. It keeps the link back to this page and the date of the figures.
Do you sell Hitachi machines? Machine dealer supply
Machine makes and model names belong to their owners. Sieruta is not affiliated with them. We use the names only to show which machines we offer attachments for, by operating weight.