Attachments for the Hitachi ZX330LC-5G CTA 25m weight range
- Bucket line
- SDB - heavy duty skeleton DB bucket1,800–2,000 mm wide
- We usually reply within 1 working day
- We check the fit before we send the quote
- Every offer names the dispatch week
- If a bracket we made is wrong and does not fit your machine, we replace it.
How is the attachment mounted on this machine?
Tell us what is on the machine now. It narrows the sizes we show and goes with your enquiry. It does not confirm fit: we check the bracket before we send the quote.
Catalogue sizes for the ZX330LC-5G CTA 25m
Each size below has a catalogue row rated for a carrier of 42,050 kg operating weight. Tell us which sizes you want and we reply with an offer.
Each family shows its candidate models by operating-weight range.
The attachments buyers in your market ask for first, sized for the ZX330LC-5G CTA 25m.
On a narrow screen the table scrolls sideways.
Buckets
| Attachment | Sizes | Heaped capacity ISO 7451 [dm³] | Width [mm] | Weight [kg] |
|---|---|---|---|---|
Digging & sorting buckets | ||||
| SDB - heavy duty skeleton DB bucket | SDB-500 · 2 width variants | 2,622–3,000 | 1,800–2,000 | 1,995–2,172 |
| RDBF - flat-top skeleton DBF bucket on rods | RDBF-500 · 3 width variants | 2,241–2,999 | 1,600–2,000 | 1,511–1,755 |
Tools
| Attachment | Sizes | Heaped capacity ISO 7451 [dm³] | Width [mm] | Weight [kg] |
|---|---|---|---|---|
Non-bucket attachments | ||||
| RIP - heavy duty ripper | Ripper-H | 684 | ||
Quick couplers
| Attachment | Sizes | Heaped capacity ISO 7451 [dm³] | Width [mm] | Weight [kg] |
|---|---|---|---|---|
| QC-S - S-System Scandinavian quick-couplerStart herePrice & lead timeGet price & lead timeS-System (Scandinavian) | QC-S90 | 750 | ||
| CW - CW-System compatible quick-couplerCW-System | CW-45, CW-45 S, CW-55, CW-U-45, CW-U-45 S | 435–1,146 |
Welded to EN ISO 3834-2. Agree it as a standing term of supply and the EN 10204 3.1 certificate ships with every attachment. You also get the CE declaration of conformity for every attachment. See the certificates.
Message us on WhatsAppPhotos and voice notes are welcome.Which coupler is on your machine?
Pick the system on your machine and we put it in your enquiry. We check the bracket before we send the quote.
How to measure your coupler
Not sure which system it is? Three measurements tell us which bracket you need.
- Measure the diameter of both pins.
- Measure the distance between the pin centres.
- Measure the width between the inside faces of the ears.
If the coupler has a make or type printed on it, send that too.
Before you order: check the interface
The weight class of the Hitachi ZX330LC-5G CTA 25m sizes the attachment. It does not tell you the pin diameter, the pin spacing or the stick width, and those decide whether an attachment fits. Measure them on the machine, or send us the measurements of the bucket it runs today.
Heavy excavators dig rock, load trucks and work in quarries, so wear decides the bucket as much as capacity does. Rock and reinforced buckets carry thicker wear steel, teeth and side cutters, and the bucket is sized to the trucks it loads and to the density of the material.DBS - engineered rock bucket for excavator
Quick coupler brackets at this weight
In our model tables, the attachments listed for the Hitachi ZX330LC-5G CTA 25m at its weight are built with these brackets. Each code opens the models that list it.
- Measure the diameter of both bucket pins.
- Measure the distance between the pin centres.
- Measure the inside width between the stick ears.
- If the machine runs a quick coupler, note its make and type.
What these terms mean:
How to choose an attachment for the job:
Sizes are matched to the published operating weight of the ZX330LC-5G CTA 25m.
- Weight Class
- Heavy Excavator (30–65 t)
- Operating Weight
- 42,050 kg
- Family-owned group, founded in 1996
- More than 50,000 attachments delivered
- Built in our own factory in Poland
Operating weight as published by Hitachi, retrieved 2026-09-10. Source
Hitachi ZX330LC-5G CTA 25m: machine data
- Operating weight
- 42,050 kg
- Engine power
- 184 kW
- Maximum dump height
- 5,570 mm
- Bucket breakout force
- 79.8 kN
- Max reach
- 11,170 mmmaker's document (hitachicm.com)
- Main pump flow
- 558 l/minmaker's document (hitachicm.com)
- Bucket capacity
- 1.3 m³maker's document (hitachicm.com)
- Bucket width
- 1,230 mmmaker's document (hitachicm.com)
- Transport width
- 3,390 mmmaker's document (hitachicm.com)
As published by Hitachi, retrieved 2026-09-19. Source
What the ZX330LC-5G CTA 25m figures mean for its attachments
- The main pump delivers up to 558 l/min at 343 bar. That is the pump output of the whole machine, not the flow an attachment gets.
- Its maximum reach is 11,170 mm.
- It dumps at up to 5,570 mm, so a truck or skip side has to sit below that height.
- Hitachi lists a 1,230 mm wide bucket for this machine.
- Hitachi lists a bucket capacity of 1.3 m³.
- Bucket breakout force is 79.8 kN. That is the force a bucket or ripper works with at the tooth.
- For transport it measures 18,250 x 3,390 x 3,460 mm (length, width, height).
- Engine power is 184 kW.
Figures as published by Hitachi in its own documents.
How the ZX330LC-5G CTA 25m compares with its neighbours
The nearest models by weight, with the difference to the ZX330LC-5G CTA 25m in parentheses where both makers publish the figure.
| Model | Operating weight | Main pump flow |
|---|---|---|
| ZX330LC-5G CTA 25m | 42.05 t | 558 l/min |
| Hitachi ZX400MC-7 | 42.5 t (+0.45 t) | 576 l/min (+18) |
| Hitachi ZX330LC-5G CTA 30m | 45.5 t (+3.45 t) | 558 l/min |
| Atlas 340LC | 42 t (-0.05 t) | 660 l/min (+102) |
Figures as each maker publishes them. A difference is shown only where both machines have a published value.
Other Hitachi models of a similar weight
Other makes of a similar weight
Operating weight within 2 t of the Hitachi ZX330LC-5G CTA 25m.
Other Hitachi models with the same coupler brackets
Our model tables give these machines the same quick coupler brackets.
Why buy from the factory
- Cutting, machining, welding and painting on one site, our own factory in Poland, EU
- More than 50,000 attachments delivered since 2008
- A record for every serial number, so the spare parts match your attachment
Need Custom Specifications?
We can manufacture attachments to your exact pin spacing and requirements for Hitachi ZX330LC-5G CTA 25m.
Questions about the ZX330LC-5G CTA 25m
- What bucket width fits the ZX330LC-5G CTA 25m?
- Hitachi lists a 1,230 mm wide bucket for it.
For publishers: cite or embed this table
Cite this table as https://sieruta.com/en/fit/hitachi/hitachi-zx330lc-5g-cta-25m, figures as of 2026-09-10.
Embed this table on your site
Copy the HTML below into your page. It keeps the link back to this page and the date of the figures.
Do you sell Hitachi machines? Machine dealer supply
Machine makes and model names belong to their owners. Sieruta is not affiliated with them. We use the names only to show which machines we offer attachments for, by operating weight.