Attachments for the Hitachi ZX375US-7 weight range
- Bucket line
- DB - heavy duty digging bucket1000–1800 mm wide
- We usually reply within 1 working day
- We check the fit before we send the quote
- Every offer names the dispatch week
- If a bracket we made is wrong and does not fit your machine, we replace it.
Catalogue sizes for the ZX375US-7
Each size below has a catalogue row rated for a carrier of 35,600 kg operating weight. Tell us which sizes you want and we reply with an offer.
On a narrow screen the table scrolls sideways.
| Attachment | Sizes | Capacity [dm³] | Width [mm] | Weight [kg] |
|---|---|---|---|---|
| DB - heavy duty digging bucket | DB-400 · 6 width variants | 1,082–2,288 SAE | 1,000–1,800 | 957–1,480 |
| SDB - heavy duty skeleton DB bucket | SDB-400 · 2 width variants | 1,917–2,224 SAE | 1,600–1,800 | 1,411–1,550 |
| DBF - flat-top digging bucket for quick coupler | DBF-400 · 6 width variants | 1,024–2,179 SAE | 1,000–1,800 | 854–1,312 |
| RDBF - flat-top skeleton DBF bucket on rods | RDBF-400 · 3 width variants | 1,727–2,179 SAE | 1,500–1,800 | 1,067–1,213 |
| DSX - Nordic heavy duty digging bucket | DS-HD-400 · 3 width variants | 921–1,462 SAE | 1,000–1,400 | 952–1,214 |
| GD - rigid grading & ditching bucket, 12–40 t | GD-400 · 3 width variants | 1,395–1,851 SAE | 2,000–2,600 | 856–1,055 |
| GDH - heavy duty hydraulic grading & ditching bucket | GDH-400 · 3 width variants | 1,336–1,780 SAE | 2,000–2,600 | 1,218–1,415 |
| SB - Dutch profile grading & ditching bucket | SB-400 · 4 width variants | 1,739–2,242 SAE | 2,000–2,500 | 889–1,065 |
| DCB - grading & ditching bucket with round profile | DCB-400 · 3 width variants | 1,307–1,735 SAE | 2,000–2,600 | 721–893 |
| RIP - heavy duty ripper | Ripper-E | 490 | ||
| CW - CW-System compatible quick-coupler | CW-45, CW-45 S, CW-55, CW-U-45, CW-U-45 S | 435–1,146 | ||
| QC-HS / QC-MS - MS-System compatible quick-coupler | QC-HS-25 | 310 | ||
| QC-PG - pin-grabber quick-coupler for factory brackets | QC-PG-100, QC-U-PG-100 | 740–1,435 |
Welded to EN ISO 3834-2. Agree it as a standing term of supply and the EN 10204 3.1 certificate ships with every attachment. You also get the CE declaration of conformity for every product that carries the CE mark.
Message us on WhatsAppPhotos and voice notes are welcome.For publishers: cite or embed this table
Cite this table as https://sieruta.com/en/fit/hitachi/hitachi-zx375us-7, figures as of 2026-09-10.
Embed this table on your site
Copy the HTML below into your page. It keeps the link back to this page and the date of the figures.
Sizes are matched to the published operating weight of the ZX375US-7.
- Weight Class
- Heavy Excavator (30–65 t)
- Operating Weight
- 35,600 kg
- Family-owned group, founded in 1996
- More than 50,000 attachments delivered
- Built in our own factory in Poland
Operating weight as published by Hitachi, retrieved 2026-09-10. Source
Start here
The attachments buyers in your market ask for first, sized for the ZX375US-7.
Which coupler is on your machine?
Pick the system on your machine and we put it in your enquiry. We check the bracket before we send the quote.
How to measure your coupler
Not sure which system it is? Three measurements tell us which bracket you need.
- Measure the diameter of both pins.
- Measure the distance between the pin centres.
- Measure the width between the inside faces of the ears.
If the coupler has a make or type printed on it, send that too.
Send me the spec sheet for my machine
Pick a bucket line and we email you its spec sheet, with the sizes we build for the ZX375US-7.
Send this answer to a colleague or dealer
Hitachi ZX375US-7: DBF - flat-top digging bucket for quick coupler (DBF-400)
ZX375US-7 at a glance
| Figure | Value | Source |
|---|---|---|
| Max dig depth | 6,920 mm | maker's website (hitachicm.com) |
| Max reach | 10,900 mm | maker's document (hitachicm.com) |
| Max dump height | 8,380 mm | maker's website (hitachicm.com) |
| Arm length | 3,110 mm | maker's document (hitachicm.com) |
| Main pump flow | 472 l/min | maker's document (hitachicm.com) |
| Bucket capacity | 1–1.62 m³ | maker's document (hitachicm.com) |
| Lift capacity | 15,930 kg | maker's document (hitachicm.com) |
| Transport width | 3,190 mm | maker's document (hitachicm.com) |
Only figures the maker publishes for this model. Where a figure is missing, no value is shown.
What the ZX375US-7 figures mean for its attachments
- The main pump delivers up to 472 l/min. That is the pump output of the whole machine, not the flow an attachment gets.
- It digs down to 6,920 mm. That is the deepest trench it can open.
- Its maximum reach is 10,900 mm.
- It dumps at up to 8,380 mm, so a truck or skip side has to sit below that height.
- Its arm is 3,110 mm long.
- Hitachi lists bucket capacities from 1 to 1.62 m³.
- Bucket breakout force is 158 kN and arm crowd force 202 kN. That is the force a bucket or ripper works with at the tooth.
- Hitachi gives a lifting capacity of 15,930 kg. Check a heavy grab or hammer, plus its load, against the full load chart.
- For transport it measures 9,980 x 3,190 x 3,380 mm (length, width, height).
- Engine power is 197 kW.
Figures as published by Hitachi in its own documents.
How the ZX375US-7 compares with its neighbours
The nearest models by weight, with the difference to the ZX375US-7 in parentheses where both makers publish the figure.
| Model | Operating weight | Max dig depth | Main pump flow |
|---|---|---|---|
| ZX375US-7 | 35.6 t | 6,920 mm | 472 l/min |
| Hitachi ZX350LC-7 / ZX350LCN-7 | 35.2 t (-0.4 t) | 7,380 mm (+460) | 576 l/min (+104) |
| Hitachi ZX350LC-7 CTA 25m and 30m | 35.2 t (-0.4 t) | not published | 576 l/min (+104) |
| Komatsu PC360LCi/NLCi-11 | 35.6 t | 7,280 mm (+360) | 535 l/min (+63) |
Figures as each maker publishes them. A difference is shown only where both machines have a published value.
Questions about the ZX375US-7
- What bucket size fits the ZX375US-7?
- Hitachi lists bucket capacities from 1 to 1.62 m³ for it.
Each family shows its candidate models by operating-weight range.
Digging & sorting buckets
- DB - heavy duty digging bucket
DB-400 · 6 width variants
- SDB - heavy duty skeleton DB bucket
SDB-400 · 2 width variants
- DBF - flat-top digging bucket for quick coupler
DBF-400 · 6 width variants
- RDBF - flat-top skeleton DBF bucket on rods
RDBF-400 · 3 width variants
- DSX - Nordic heavy duty digging bucket
DS-HD-400 · 3 width variants
Ditching, grading, sloping buckets
- GD - rigid grading & ditching bucket, 12–40 t
GD-400 · 3 width variants
- GDH - heavy duty hydraulic grading & ditching bucket
GDH-400 · 3 width variants
- SB - Dutch profile grading & ditching bucket
SB-400 · 4 width variants
- DCB - grading & ditching bucket with round profile
DCB-400 · 3 width variants
- CW - CW-System compatible quick-coupler
CW-45, CW-45 S, CW-55, CW-U-45, CW-U-45 S
- QC-HS / QC-MS - MS-System compatible quick-coupler
QC-HS-25
- QC-PG - pin-grabber quick-coupler for factory brackets
QC-PG-100, QC-U-PG-100
Hitachi ZX375US-7: machine data
- Operating weight
- 35,600 kg
- Engine power
- 197 kW
- Maximum digging depth
- 6,920 mm
- Maximum dump height
- 8,380 mm
- Bucket breakout force
- 158 kN
- Arm crowd force
- 202 kN
As published by Hitachi, retrieved 2026-09-19. Source
Before you order: check the interface
The weight class of the Hitachi ZX375US-7 sizes the attachment. It does not tell you the pin diameter, the pin spacing or the stick width, and those decide whether an attachment fits. Measure them on the machine, or send us the measurements of the bucket it runs today.
Heavy excavators dig rock, load trucks and work in quarries, so wear decides the bucket as much as capacity does. Rock and reinforced buckets carry thicker wear steel, teeth and side cutters, and the bucket is sized to the trucks it loads and to the density of the material.
Quick coupler brackets at this weight
In our model tables, the attachments listed for the Hitachi ZX375US-7 at its weight are built with these brackets. Each code opens the models that list it.
- Measure the diameter of both bucket pins.
- Measure the distance between the pin centres.
- Measure the inside width between the stick ears.
- If the machine runs a quick coupler, note its make and type.
What these terms mean:
How to choose an attachment for the job:
Other makes of a similar weight
Operating weight within 2 t of the Hitachi ZX375US-7.
Other Hitachi models with the same coupler brackets
Our model tables give these machines the same quick coupler brackets.
Why buy from the factory
- Cutting, machining, welding and painting on one site, our own factory in Poland, EU
- More than 50,000 attachments delivered since 2008
- A record for every serial number, so the spare parts match your attachment
Need Custom Specifications?
We can manufacture attachments to your exact pin spacing and requirements for Hitachi ZX375US-7.
Welded to EN ISO 3834-2. Agree it as a standing term of supply and the EN 10204 3.1 certificate ships with every attachment. You also get the CE declaration of conformity for every product that carries the CE mark.
Do you sell Hitachi machines? Machine dealer supply
Machine makes and model names belong to their owners. Sieruta is not affiliated with them. We use the names only to show which machines we offer attachments for, by operating weight.