Attachments for the Komatsu PC600LC-6 weight range
Weight Class: Heavy Excavator (30–65 t) Operating Weight: 60,000 kg
Price & lead time Get price & lead time- We usually reply within 1 working day
- We check the fit before we send the quote
- Every offer names the dispatch week
- If a bracket we made is wrong and does not fit your machine, we replace it.
How is the attachment mounted on this machine?
Tell us what is on the machine now. It narrows the sizes we show and goes with your enquiry. It does not confirm fit: we check the bracket before we send the quote.
Ask for a price with this answer
The short version for the PC600LC-6
Families to look at first
- RIP - heavy duty ripper
- QC-S - S-System Scandinavian quick-coupler
- CW - CW-System compatible quick-coupler
Quick coupler brackets at this weight
- S90
- CW55
- OQ90
- SW66
Brackets we build attachments with in this weight range. Not a confirmed fit.
Still to check
Pin diameter, pin spacing, inside width between the stick ears, and any quick coupler on the machine.
Catalogue sizes for the PC600LC-6
Each size below has a catalogue row rated for a carrier of 60,000 kg operating weight. Tell us which sizes you want and we reply with an offer.
Each family shows its candidate models by operating-weight range.
The attachments buyers in your market ask for first, sized for the PC600LC-6.
On a narrow screen the table scrolls sideways.
Tools
| Attachment | Sizes | Heaped capacity ISO 7451 [dm³] | Width [mm] | Weight [kg] |
|---|---|---|---|---|
Non-bucket attachments | ||||
| RIP - heavy duty ripper | Ripper-H | 684 | ||
Quick couplers
Coupler sizes within this machine's published weight range. Not a confirmed fit.
| Attachment | Sizes | Heaped capacity ISO 7451 [dm³] | Width [mm] | Weight [kg] |
|---|---|---|---|---|
| QC-S - S-System Scandinavian quick-coupler Start here Price & lead time Get price & lead time S-System (Scandinavian) | QC-S90 | 750 | ||
| CW - CW-System compatible quick-coupler CW-System | CW-55 | 660 |
Welded to EN ISO 3834-2. Agree it as a standing term of supply and the EN 10204 3.1 certificate ships with every attachment. You also get the CE declaration of conformity for every quick coupler and hydraulic attachment. See the certificates.
Message us on WhatsApp Photos and voice notes are welcome.Before you order: check the interface
The weight class of the Komatsu PC600LC-6 sizes the attachment. It does not tell you the pin diameter, the pin spacing or the stick width, and those decide whether an attachment fits. Measure them on the machine, or send us the measurements of the bucket it runs today.
Heavy excavators dig rock, load trucks and work in quarries, so wear decides the bucket as much as capacity does. Rock and reinforced buckets carry thicker wear steel, teeth and side cutters, and the bucket is sized to the trucks it loads and to the density of the material.DBS - engineered rock bucket for excavator
Quick coupler brackets at this weight
In our model tables, the attachments listed for the Komatsu PC600LC-6 at its weight are built with these brackets. Each code opens the models that list it.
Brackets we build attachments with in this weight range. Not a confirmed fit.
- Measure the diameter of both bucket pins.
- Measure the distance between the pin centres.
- Measure the inside width between the stick ears.
- If the machine runs a quick coupler, note its make and type.
What these terms mean:
How to choose an attachment for the job:
Sizes are matched to the published operating weight of the PC600LC-6.
- Weight Class
- Heavy Excavator (30–65 t)
- Operating Weight
- 60,000 kg
- Family-owned group, founded in 1996
- More than 50,000 attachments delivered
- Built in our own factory in Poland
Operating weight as published by Komatsu, retrieved 2026-09-10. Source
Komatsu PC600LC-6: machine data
- Operating weight
- 60,000 kg
- Engine power
- 286 kW
- Maximum digging depth
- 8,490 mm
- Maximum dump height
- 7,960 mm
- Bucket breakout force
- 263.8 kN
- Arm crowd force
- 221.6 kN
- Max reach
- 12,800 mm maker's document (komatsu.eu)
- Arm length
- 2,900–3,500 mm maker's document (komatsu.eu)
- Main pump flow
- 820 l/min maker's document (komatsu.eu)
- Bucket capacity
- 1.8–3.5 m³ maker's document (komatsu.eu)
- Transport width
- 3,900 mm maker's document (komatsu.eu)
As published by Komatsu, retrieved 2026-09-17. Source
- Pin diameter
- 115 mm Source: Tuff Buckets, Equipment Plus, and Long Reach Boom. From a dealer's table. It does not say which arm or quick coupler was fitted.
A guide only. Measure the pins before you order.
What the PC600LC-6 figures mean for its attachments
- The main pump delivers up to 820 l/min at 318.7 bar. That is the pump output of the whole machine, not the flow an attachment gets.
- It digs down to 8,490 mm. That is the deepest trench it can open.
- Its maximum reach is 12,800 mm.
- It dumps at up to 7,960 mm, so a truck or skip side has to sit below that height.
- Komatsu offers arms from 2,900 to 3,500 mm. A longer arm reaches further, a shorter one handles a heavier bucket.
- Komatsu lists bucket capacities from 1.8 to 3.5 m³.
- Bucket breakout force is 263.8 kN and arm crowd force 221.6 kN. That is the force a bucket or ripper works with at the tooth.
- For transport it measures 12,810 x 3,900 x 4,300 mm (length, width, height).
- Engine power is 286 kW.
Figures as published by Komatsu in its own documents.
How the PC600LC-6 compares with its neighbours
The nearest models by weight, with the difference to the PC600LC-6 in parentheses where both makers publish the figure.
| Model | Operating weight | Max dig depth | Main pump flow |
|---|---|---|---|
| PC600LC-6 | 60 t | 8,490 mm | 820 l/min |
| Komatsu PC600/LC-8 | 57.6 t (-2.4 t) | 8,490 mm | 820 l/min |
| Komatsu PC600-6 | 57.5 t (-2.5 t) | 7,060 mm (-1,430) | 820 l/min |
| Volvo EC500 High Reach | 61.3 t (+1.3 t) | 8,040 mm (-450) | 752 l/min (-68) |
Figures as each maker publishes them. A difference is shown only where both machines have a published value.
PC600LC-6: what the brochure names
Features Komatsu names in its own brochure for the PC600LC-6. Some of them may be optional, so check the machine's spec before you order.
- A load-sensing hydraulic system.
- Work modes you select from the cab.
From Komatsu's published brochure. We keep the source document on file.
Other Komatsu models of a similar weight
Other makes of a similar weight
Operating weight within 2 t of the Komatsu PC600LC-6.
Other Komatsu models with the same coupler brackets
Our model tables give these machines the same quick coupler brackets.
Why buy from the factory
- Cutting, machining, welding and painting on one site, our own factory in Poland, EU
- More than 50,000 attachments delivered since 2008
- A record for every serial number, so the spare parts match your attachment
Need Custom Specifications?
We can manufacture attachments to your exact pin spacing and requirements for Komatsu PC600LC-6.
Questions about the PC600LC-6
- What bucket size fits the PC600LC-6?
- Komatsu lists bucket capacities from 1.8 to 3.5 m³ for it.
For publishers: cite or embed this table
Cite this table as https://sieruta.com/en/fit/komatsu/komatsu-pc600lc-6, figures as of 2026-09-10.
Embed this table on your site
Copy the HTML below into your page. It keeps the link back to this page and the date of the figures.
Do you sell Komatsu machines? Machine dealer supply
Machine makes and model names belong to their owners. Sieruta is not affiliated with them. We use the names only to show which machines we offer attachments for, by operating weight.