Tools · Rippers & rakes
MR mini - multi-ripper for mini-excavator
Standard
MR-mini Multi-Ripper Fleco for mini- & midi-excavator
Compatible interfaces: S30 · S40 · S45 · S50 · S60 · MS01 · MS03 · MS08 · MS10 · CW00 · CW05 · CW10 +16
- 1.2–14 tons
- On request
- Carriers: Mini, Midi, Standard
A multi-tooth ripper for the mini-excavator: several tines break up compacted ground, frost layer and root mats in one pass, where a single ripper tooth would only cut a slot. It loosens the ground ahead of the bucket, so the bucket works in broken material and not in solid ground.
About this family
Optional Hardox® wear plates on the legs take the wear in place of the legs themselves.
Features
Base features:
- Hardox® legs
- Reinforcement under the tube
- Teeth CAT / BYG / ESCO
- Top plate ready for welding
- Legs 20 to 30 mm thick
Optional features:
- Top plate for bolt-on bracket
- Hardox® wear plates on legs
Dimensions
The letters on the drawing match the columns in the table below.
Dimensions in mm
Models and specifications
Figures as printed on this family’s datasheet. A dash means the datasheet does not state that figure.
Datasheet (PDF)- Which bracket does your machine take? See the coupler fit reference
- Looking for your machine by make and model? See the machine fit tables
| Model | Machine class [t] | Width [mm] | Height [mm] | Length [mm] | Number of legs | Spacing [mm] | Leg thickness [mm] | Tooth systems | Quick coupler brackets | Weight [kg] |
|---|---|---|---|---|---|---|---|---|---|---|
| MRF 25 | 1.2–2.5 | 400 | 401 | 301 | 3 | 156 | 20 | E701 | S30 · MS01 · M02 · M03 · HS02 · CW00 · CW05 · OQ40 · Klac C | 36 |
| MRF 40 | 2.5–4.0 | 600 | 465 | 319 | 4 | 183 | 20 | E701 | S40 · MS03 · M10 · HS03 · CW05 · OQ40 · Klac D | 62 |
| MRF 40 | 2.5–4.0 | 800 | 465 | 319 | 4 | 230 | 20 | E701 | S40 · MS03 · M10 · HS03 · CW05 · OQ40 · Klac D | 69 |
| MRF 75 | 4.0–7.5 | 800 | 554 | 381 | 5 | 185 | 25 | J200 | S40 · MS03 · MS08 · M10 · HS06 · CW10 · OQ45 · Klac E · F | 117 |
| MRF 75 | 4.0–7.5 | 1000 | 554 | 381 | 5 | 210 | 25 | J200 | S40 · MS03 · MS08 · M10 · HS06 · CW10 · OQ45 · Klac E · F | 121 |
| MRF 140 | 7.5–14.0 | 1000 | 710 | 505 | 6 | 186 | 30 | J200 | S45 · S50 · S60 · MS08 · MS10 · M10 · M18 · HS08 · CW10 · CW20 · OQ60 · Klac F | 221 |
| MRF 140 | 7.5–14.0 | 1200 | 710 | 505 | 6 | 196 | 30 | J200 | S45 · S50 · S60 · MS08 · MS10 · M10 · M18 · HS08 · CW10 · CW20 · OQ60 · Klac F | 228 |
→ Scroll the table sideways to see every model.
Compliance, certification & documentation
- EN ISO 3834-2Certified welding qualityCSW/1293/2025
- EN 1090-1 EXC1 + EXC2Factory production control1433-CPR-0257
- EN ISO 9606-1 · WPQR EN ISO 15614Qualified welders and procedures
- EN ISO 9712: VT + PT level 2Non-destructive testingwhere the drawing or inspection plan requires it
- EN 10204 3.1Material traceability
- CE: 2006/42/ECCE markingTransition to Regulation (EU) 2023/1230 underway. Applicable from 20 January 2027.
- Materials
- Standard: Legs: Hardox®
Warranty
Sieruta covers manufacturing defects in the components it makes itself.
Normal wear, misuse or overloading and unauthorised modifications are not covered. Warranty terms and claims
Request a quote
Tell us your machine and the job. An engineer checks the fit, and we usually reply within 24–48 hours.
More from this family group
Standard
MR - heavy duty excavator multi-ripper
The MR multi-ripper enters the ground on several legs at once and breaks up and loosens compacted material.
On requestView product
Standard
RIP - heavy duty ripper
A single shank made of high-strength steel, with a protector over the shank. It breaks up hard soil, rock and frozen ground, so the material can then be loaded with an ordinary digging bucket.
On requestView product
Standard
DuoRIP - double ripper for root extraction
Two shanks go deep into the ground at once. It rips out root systems, large roots and stumps when land is cleared for a site.
On requestView product
Standard
RC - root cutter
Three sizes, from 13 to 47 kg, each fitting the quick-coupler brackets in its table. It cuts roots on excavators from 0.6 to 10 t.
On requestView product
Standard
RRB - root rake bucket profile
Tines set in a bucket-shaped frame rake out roots and stones, then carry and dump what they collect. Clearing and loading are done in the same pass.
On requestView product
Configured
RRH - root rake with hydraulic clamp
A root rake with a hydraulic top clamp: it pulls out roots and holds them against the tines.
On requestView product
