Tools · Rippers & rakes
RIP mini - ripper shank for mini-excavator
Standard
RIP-mini Ripper Shank for mini- & midi-excavator
Compatible interfaces: S30 · S40 · S45 · S50 · S60 · MS01 · MS03 · MS08 · MS10 · CW00 · CW05 · CW10 +16
- 0.8–14 tons
- On request
- Carriers: Mini, Midi, Standard
The RIP mini is a ripper shank for mini-excavators. It opens ground a bucket cannot enter: frozen and frost-heaved soil, compacted clay, stony fill, thin concrete and asphalt.
About this family
The shank is shaped for the mini class, so it reaches depth without pulling the machine off balance. Its narrow profile keeps the working point in view, which matters when you rip beside a kerb, a pipe run or a wall.
The tip is replaceable. When it wears you change the tip and not the tool, and you can fit a different tip for a different material.
Ripping forces go into the shank body and a reinforced top plate. Two versions are built: a Hardox® body, or an S355 body with HB wear plates.
The same tool pulls roots in landscaping and works as a frost hook in winter. It mounts on standard quick couplers, so it goes on and off between tasks.
Features
- Shank profile for the mini class: depth without unsettling the machine
- Replaceable tip: change the tip, not the tool, and match the tip to the material
- Narrow profile: the working point stays in view in confined spaces
- One tool, three jobs: breaking, root pulling and frost ripping
- Standard quick couplers: on and off between tasks
Base features:
- Two versions: Hardox® body / S355 body + HB wear pads
- Reinforced top plate
- High-strength ripper teeth
- Dimensions and angle sized for the mini class
Optional features:
- Hardox® wear plates
- Sharpened body
- Other types of teeth
Dimensions
The letters on the drawing match the columns in the table below.
Dimensions in mm
Typical jobs
- Breaking up compacted soil and clay
- Demolition of concrete slabs and foundations
- Root removal in landscaping and land clearing
- Frost ripping in cold climates
- Trenching in rocky or compacted terrain
- Asphalt removal in road maintenance
- Selective breaking in sensitive areas or archaeological sites
Models and specifications
Figures as printed on this family’s datasheet. A dash means the datasheet does not state that figure.
Datasheet (PDF)| Model | Machine class [t] | Height [mm] | Length [mm] | Tip radius [mm] | T [mm] | Tooth systems | Quick coupler brackets | Weight [kg] |
|---|---|---|---|---|---|---|---|---|
| Ripper-2.5 | 0.8–2.5 | 387 | 409 | 431 | 35 | V13 | S30 · MS01 · M02 · M03 · HS02 · CW00 · CW05 · OQ40 · Klac C | 21 |
| Ripper-5.5 | 2.5–5.5 | 480 | 524 | 543 | 60 | V19 | S40 · MS03 · M10 · HS03 · CW05 · CW10 · OQ40 · Klac D · E | 51 |
| Ripper-10 | 5.5–10 | 673 | 586 | 740 | 60 | V23 | S40/240 · S45 · S50 · MS08 · M10 · HS06 · HS08 · CW10 · OQ45 · Klac F | 98 |
| Ripper-14 | 10–14 | 880 | 785 | 910 | 75 | V23 | S60 · MS10 · M18 · HS08 · CW20 · OQ60 | 221 |
→ Scroll the table sideways to see every model.
Compliance, certification & documentation
- EN ISO 3834-2Certified welding qualityCSW/1293/2025
- EN 1090-1 EXC1 + EXC2Factory production control1433-CPR-0257
- EN ISO 9606-1 · WPQR EN ISO 15614Qualified welders and procedures
- EN ISO 9712: VT + PT level 2Non-destructive testingwhere the drawing or inspection plan requires it
- EN 10204 3.1Material traceability
- CE: 2006/42/ECCE markingTransition to Regulation (EU) 2023/1230 underway. Applicable from 20 January 2027.
- Materials
- Standard: Body: Hardox® or S355
Warranty
Sieruta covers manufacturing defects in the components it makes itself.
Normal wear, misuse or overloading and unauthorised modifications are not covered. Warranty terms and claims
Request a quote
Tell us your machine and the job. An engineer checks the fit, and we usually reply within 24–48 hours.
More from this family group
Standard
MR - heavy duty excavator multi-ripper
The MR multi-ripper enters the ground on several legs at once and breaks up and loosens compacted material.
On requestView product
Standard
RIP - heavy duty ripper
A single shank made of high-strength steel, with a protector over the shank. It breaks up tough soil, rock and frozen ground, so the material can then be loaded with an ordinary digging bucket.
On requestView product
Standard
DuoRIP - double ripper for root extraction
Two shanks go deep into the ground at once. It rips out root systems, large roots and stumps when land is cleared for a site.
On requestView product
Standard
RC - root cutter
Three sizes, from 13 to 47 kg, each fitting the quick-coupler brackets in its table. It cuts roots on excavators from 0.6 to 10 t.
On requestView product
Standard
RRB - root rake bucket profile
Tines set in a bucket-shaped frame rake out roots and stones, then carry and dump what they collect. Clearing and loading are done in the same pass.
On requestView product
Configured
RRH - root rake with hydraulic clamp
A root rake with a hydraulic top clamp: it pulls out roots and holds them against the tines.
On requestView product
