Buckets and attachments for the XCMG XC8-S3580
- Bucket line
- SDB - heavy duty skeleton DB bucket1,000–1,200 mm wide
- We usually reply within 1 working day
- We check the fit before we send the quote
- Every offer names the dispatch week
- If a bracket we made is wrong and does not fit your machine, we replace it.
How is the attachment mounted on this machine?
Tell us what is on the machine now. It narrows the sizes we show and goes with your enquiry. It does not confirm fit: we check the bracket before we send the quote.
Ask for a price with this answer
Which end is the attachment for?
Catalogue sizes for the XC8-S3580
Each size below has a catalogue row rated for an excavator of about 10.1 t. That is the class a backhoe loader of this weight usually matches. Tell us which sizes you want and we reply with an offer.
Each family shows its candidate models by operating-weight range.
On a narrow screen the table scrolls sideways.
Buckets
| Attachment | Sizes | Heaped capacity ISO 7451 [dm³] | Width [mm] | Weight [kg] |
|---|---|---|---|---|
Digging & sorting buckets | ||||
| SDB - heavy duty skeleton DB bucket | SDB-120 · 2 width variants | 435–548 | 1,000–1,200 | 286–333 |
Tools
| Attachment | Sizes | Heaped capacity ISO 7451 [dm³] | Width [mm] | Weight [kg] |
|---|---|---|---|---|
Non-bucket attachments | ||||
| GRB - excavator grading beam | GRB midi · 6 variants, GRB maxi · 6 variants | 2,000–3,000 | 216–680 | |
Other mini-ex attachments | ||||
| RIP mini - ripper shank for mini-excavator | Ripper-14 | 221 | ||
| AC mini - asphalt cutter for mini-excavator | AC-10 | 67 | ||
Welded to EN ISO 3834-2. Agree it as a standing term of supply and the EN 10204 3.1 certificate ships with every attachment. You also get the CE declaration of conformity for every attachment. See the certificates.
Message us on WhatsAppPhotos and voice notes are welcome.The front end of this backhoe loader
- Front loader bucketAsk us for this end
- Quick couplerAsk us for this end
Which coupler is on your machine?
Pick the system on your machine and we put it in your enquiry. We check the bracket before we send the quote.
How to measure your coupler
Not sure which system it is? Three measurements tell us which bracket you need.
- Measure the diameter of both pins.
- Measure the distance between the pin centres.
- Measure the width between the inside faces of the ears.
If the coupler has a make or type printed on it, send that too.
Before you order: check the interface
The weight class of the XCMG XC8-S3580 sizes the attachment. It does not tell you the pin diameter, the pin spacing or the stick width, and those decide whether an attachment fits. Measure them on the machine, or send us the measurements of the bucket it runs today.
A backhoe loader digs at the rear and loads at the front, so the rear bucket is chosen for trenching and the loader bucket for moving material. The rear quick coupler, where the machine has one, sets the bracket every rear attachment needs; the pin and stick checks below still decide the fit.
Quick coupler brackets at this weight
In our model tables, the attachments listed for the XCMG XC8-S3580 at its weight are built with these brackets. Each code opens the models that list it.
- Measure the diameter of both bucket pins.
- Measure the distance between the pin centres.
- Measure the inside width between the stick ears.
- If the machine runs a quick coupler, note its make and type.
What these terms mean:
How to choose an attachment for the job:
Sizes are matched to the operating weight of the XC8-S3580, moved to the excavator class a backhoe loader of this weight usually digs like: about 10.1 t.
- Weight Class
- Large (10–30 t)
- Operating Weight
- 10,000 kg
- Family-owned group, founded in 1996
- More than 50,000 attachments delivered
- Built in our own factory in Poland
Operating weight as published by XCMG, retrieved 2026-09-11. Source
XCMG XC8-S3580: machine data
- Operating weight
- 10,000 kg
- Engine power
- 82 kW
- Maximum digging depth
- 5,555 mm
- Main pump flow
- 160 l/minmaker's document via targoncatrade.positive.hu
- Bucket capacity
- 0.26 m³maker's document (xcmgglobal.com)
- Transport width
- 2,510 mmmaker's document (xcmgglobal.com)
- Loader bucket capacity
- 1.3 m³maker's document (xcmgglobal.com)
As published by XCMG, retrieved 2026-09-18. Source
What the XC8-S3580 figures mean for its attachments
- The main pump delivers up to 160 l/min at 250 bar. That is the pump output of the whole machine, not the flow an attachment gets.
- It digs down to 5,555 mm. That is the deepest trench it can open.
- XCMG lists a bucket capacity of 0.26 m³.
- Its transport width is 2,510 mm.
- Engine power is 82 kW.
Figures as published by XCMG in its own documents.
How the XC8-S3580 compares with its neighbours
The nearest models by weight, with the difference to the XC8-S3580 in parentheses where both makers publish the figure.
| Model | Operating weight | Max dig depth | Main pump flow |
|---|---|---|---|
| XC8-S3580 | 10 t | 5,555 mm | 160 l/min |
| CASE 695SV | 9.97 t (-0.03 t) | 5,641 mm (+86) | 165 l/min (+5) |
Figures as each maker publishes them. A difference is shown only where both machines have a published value.
XC8-S3580: build years and variants
Build years: 2025–2026
Variants
- XC8-S3580 Backhoe Loader (2025–2026)
Years and variants as listed in the LECTURA Specs database.
Other makes of a similar weight
Operating weight within 2 t of the XCMG XC8-S3580.
Why buy from the factory
- Cutting, machining, welding and painting on one site, our own factory in Poland, EU
- More than 50,000 attachments delivered since 2008
- A record for every serial number, so the spare parts match your attachment
Need Custom Specifications?
We can manufacture attachments to your exact pin spacing and requirements for XCMG XC8-S3580.
Questions about the XC8-S3580
- What bucket size fits the XC8-S3580?
- XCMG lists a bucket capacity of 0.26 m³ for it.
For publishers: cite or embed this table
Cite this table as https://sieruta.com/en/fit/xcmg/xcmg-xc8-s3580, figures as of 2026-09-11.
Embed this table on your site
Copy the HTML below into your page. It keeps the link back to this page and the date of the figures.
Do you sell XCMG machines? Machine dealer supply
Machine makes and model names belong to their owners. Sieruta is not affiliated with them. We use the names only to show which machines we offer attachments for, by operating weight.